Hold it , i forgot to mention something here , after i add the code u provided , rebuilt the image .
although that the image is being created without adding duplicated modules ( should be workin at this point)
i made sure of my kernel Ver and /etc/grub.conf file , even reinstalled grub but still the same !
it shows the following :-
at boot time i cant see the exact kernel version , as it shows
CentOs ( 2.6.18-238.9.1.el5xen)
Centos ( 2.6.18-238-el5xen )
1) why it still showing the insmod Error inserting `/lib/raid456.ko` -1 File Exist if it didn`t add it twice
2) why cant i see my exact kernel version at boot
Hi Everybody
I need help from you guys.
I'm getting this message on PC where i'm running Unix User using Reflection in order to get graphically format for Oracle Report Server.
What is causing this msg and how to solve it?
Regards and thanks in advance.
Gege
*Error: file... (0 Replies)
If we need to add a .ko file to your kernel. What we do is use insmod every time you boot. But if we would like it to load at boot automatically, what would we do? (0 Replies)
Hi Everyone,
I am relatively new to Linux. After about three months of trying to compile a driver for a ESDCAN card, I finally found a version and kernel that worked. I am running Slackware V12.0 with kernel version 2.6.24.5-smp. When I use insmod to insert the driver file (esdcan-pci331.ko),... (1 Reply)
I have an X4500 server running solaris 10 and when I reboot my system it displays the following errors messages. Could someone help me with this ???
NOTICE: pci8086,1011 - e1000g : Adapter 100Mbps full duplex copper link is up.
Nov 8 17:41:46 /usr/lib/snmp/snmpdx: can't open the file
Nov 8... (2 Replies)
Hi all,
I have following code:
export USERID=user
export BATCHHOSTIP=190.113.3.324
remotePath=/home/user
fileName=redbook.txt
EXIST=`ssh $USERID@$BATCHHOSTIP 'if ; then echo 0; else echo 1 ; fi'`
echo $EXIST
II run the code from other server. The redbook.txt file is exist in... (1 Reply)
Hello,
I'm experimenting a problem on my rh server.
Red Hat Enterprise Linux AS release 3 (Taroon Update 8)
2.4.21-47.ELsmp #1 SMP i686 i686 i386 GNU/Linux
It started with a segmentation fault on
#id root
To resolve it, I've installed
coreutils-4.5.3-28.4.i386.rpm
But, I... (6 Replies)
Hi,
Please guide me where i am doing wrong, i am getting
ORA-01756:quoted string not properly terminated when i am trying to insert file into CLOB cloumn of Oracle DB.
Please find below the code where log file variable is myLogFile. Please let me know where i am doing wrong.
... (0 Replies)
I have open suse kernel kernel 3.1.0-1.2-desktop on which I used kernel source 3.1.10-1.2 downloaded from kernel.org.
The module gets built.
While loading a kernel module I am getting Invalid module format error with description "first_driver: no symbol version for module_layout"
The... (5 Replies)
When I try to insert a simple kernel module I get the following error
> insmod: error inserting 'test.ko': -1 Invalid module format
> in dmesg I see:
disagrees about version of symbol module_layout
I have following kernel which I downloaded using apt-get:
uname -r
2.6.32-24-generic
... (0 Replies)
Hi all,
I am reading control file log from my server and putting it to a variable
for j in $(cat $dirname/ctl_file.log)
do
if
then
Y=${#fileclob_ctl_file}
if
then
fileclob_ctl_file=$j
else
fileclob_ctl_file="${fileclob_ctl_file},${j}"
fi
fi
... (5 Replies)
Discussion started by: Pratiksha Mehra
5 Replies
LEARN ABOUT POSIX
installgrub
installgrub(1M)installgrub(1M)NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)