I'm a technician who has been called upon to troubleshoot an ancient HP9000 K260, running HP UX 11.11.
After a power sag/crash/restart FSCK gave multiple error/warning messages about logical volumes and groups. I have some modest experience with Unix servers, but not on such an old and complex machine, and I'm in way over my head. Before I even go into the problems I'm asking for help with, is there anyone on these forums who has knowledge of such an old machine? I would be extremely grateful for any help I could get. I suspect file system corruption and perhaps a failed physical drive, but I don't even know how to figure out which drive (of the 14) needs to be replaced! I have replacement drives, and happily data loss is not an issue because there was a complete backup of the OS (Ignite) as well as all data.
Yes, I know this machine should have been retired years ago, but for whatever reason the client is willing to spend the money to keep it going for a couple more years. There seems to be nobody in my entire state who has experience working on this thing, however. Including me.
I'm accessing the server through an equally-ancient terminal, not a PC, so I can't copy and paste output here on the forum. I do have clear .jpg images of the screen output, and can attach those.
I will be extremely grateful for any and all assistance.
Sun Ultra 80 ...
had to connect an additional drive. connect it according to hardware manual
The problem is when i try to power on the system , it dosent start, .. like the system is dead. :(
So i remove the new drive and voila ... power starts up .
Can anyone pinpoint wats goin on here. ... (7 Replies)
HELP!!
I am having some major problems at present with a HP dat drive under RH9. The drive worked fine previously under RH8, but now does not work.
I am using kernel 2.4.20-30.9 on a i686 athlon intel box.
My messages log shows the below:
Apr 23 11:39:24 devsys kernel: ahc_pci:1:6:0:... (0 Replies)
I've got SUSE 9 installed on a removable hard drive and the system is up and running fine.
I'm trying to copy stuff off a CD onto one of my Linux partitions but I am getting an errors :
* Could not read /media/cdrom/file1.tar.tar
I can browse to the file location on the CD by using the... (11 Replies)
Recently we brought up a Spectralogic 2K Tape Library that had been out of service for about 3 years to replace a DDS-4 tape drive unit as our main backup device.
Everything seemed to go fine but now I have run into a little problem.
System details:
FBSD 6.1
SpectraLogic 2K library with a... (1 Reply)
Recently we had a problem with a CPU card on our SunFire V880 which has Solaris 9 OS. we removed the card and there was also a problem with our usr which was accidentally deleted. We able to restore the usr but now we having a problem with our tape drive.
Previously we could write to the with
... (5 Replies)
Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
I am trying to install an HP StorageWorks DAT40 Tape drive at SC0 5.0.7. The tape drive is not functional.
When I run #sconf -v this is what I get;
Sdsk ad160 0 0 0 0
Sdsk ad160 0 0 1 0
Stp ad160 0 0 3 0
But when... (2 Replies)
Hello All,
Can anybody please tell me what is the maximum limit of Physical IBM Power Machine which can be handled by single HMC at a single point of time?
Thanks,
Jenish (1 Reply)
Hi,
I run Fedora 17.
I created a physical volume of 30GB on a disk with 60GB of space so there is 30GB of free space. On the physical volume, I created my volume group and logical volumes. I assigned all the space in the physical volume to my volume group. I need to add the 30GB of free space... (1 Reply)
Hello,
I have some doubts about the dvd/cd physical on power machine and AIX.
I see on my AIX lpar and see there is 1 DVD drive and its physical location
bash-4.4# lsdev | grep cd0
cd0 Available 03-00-00 SATA DVD-RAM Drive
bash-4.4# lscfg -vpl cd0
cd0 ... (12 Replies)
Discussion started by: Phat
12 Replies
LEARN ABOUT NETBSD
mlxctl
MLXCTL(8) BSD System Manager's Manual MLXCTL(8)NAME
mlxctl -- Mylex DAC960 family management utility
SYNOPSIS
mlxctl [-f dev] [-v] [-a] status [drive] [...]
mlxctl [-f dev] [-a] detach [drive] [...]
mlxctl [-f dev] [-a] check [drive] [...]
mlxctl [-f dev] rebuild channel:target
mlxctl [-f dev] cstatus
mlxctl [-f dev] rescan
mlxctl [-f dev] config
DESCRIPTION
The mlxctl utility performs status monitoring and management functions for Mylex DAC960 RAID controllers and attached devices.
The following options are available:
-a Apply the action to all drives attached to the controller.
-f dev Specify the control device to use. The default is /dev/mlx0.
-v Increased verbosity.
The following commands are available:
cstatus Display the controller's current status.
status Display the status of the specified drives. This command returns 0 if all drives tested are online, 1 if one or more drives are
critical and 2 if one or more are offline.
rescan Re-scan the logical drive table, and attach or detach devices from the system as necessary.
detach Detach the specified drives. Drives must be unmounted and unopened for this command to succeed.
check Initiate a consistency check and repair pass on a drive that provides redundancy (e.g., RAID1 or RAID5). This command returns imme-
diately. The status command can be used to monitor the progress of the check.
rebuild Rebuild onto the specified physical drive. Note that there can be only one running rebuild operation per controller at any given
time. This command returns immediately. The cstatus command can be used to monitor the progress of the rebuild.
config Write the current system drive configuration to stdout.
EXAMPLES
Display the status of drive ld3 attached to the controller mlx1:
mlxctl -f /dev/mlx1 -v status ld3
SEE ALSO ld(4), mlx(4)HISTORY
The mlxctl command first appeared in NetBSD 1.5.3, and was based on the mlxcontrol utility found in FreeBSD.
BUGS
Modifying drive configuration is not yet supported.
Some commands do not work with older firmware revisions.
Error log extraction is not yet supported.
BSD April 10, 2000 BSD