04-17-2011
vPar Boot Error
Hi All,
Please help me out in below issue in creating vPar.
We have one nPar in which we have to create 2 vPars, out of which first vPar is already created and it is running well which have local disk as a boot device.Now we have to create 2nd vPar which need to use SAN disk for booting. Now the issue is, vPar is created and when we try to install OS by booting it through first vPar,
vparboot -p <vparname> -I
It will start the configuration and after completing archive load of source successfully. it will boot automatically (by giving message: rebooting as expected) and thereafter it will fail by giving out below message:
HP-UX Boot Loader for IPF -- Revision 2.029
Error: kernel does not contain required vPars components.
[MON]
vPar "vpar2" failed to load the kernel for either trying to boot an unsupported kernel in vPars environment or having incorrect vPars software installed on the boot device.
Error loading "vpar2". Shutting down "vpar2"...
[MON] vpar2 has halted.
Appriciate your help to resolve the issue.
Regards,
Laxmikant
9 More Discussions You Might Find Interesting
1. Solaris
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies
2. UNIX for Dummies Questions & Answers
VERY new to Unix here! I have a client with a unix machine(Sun Systems Unix system V Release 4.0) that gets an error on boot up.
"7.e.1": Syntax error in tty mode
Like I said, I new to Unix as this is my first time ever touching a Unix machine. So, I don't know if this is a major or minor... (0 Replies)
Discussion started by: rlpierce04
0 Replies
3. AIX
Hi all,
I have one booting problem with an AIX machine. It is not booting.
It is showing error B1014602 on OK prompt.
Could you please tell me, what is the problem with it and its respective solution?
Thank you very much. (2 Replies)
Discussion started by: prashantchavan
2 Replies
4. HP-UX
Hi
Can I use a vpar as an ignite server? (1 Reply)
Discussion started by: mahlathini
1 Replies
5. HP-UX
I wonder if anyone could assist with this.
We have taken over administration of an rp8440 that has been split into 2 nPars and has 4vPars per nPar.
I have to add a network card into one of the vPars that was missed at the time the vPar was created. That bit i have no problem with.
The... (0 Replies)
Discussion started by: Andyp2704
0 Replies
6. SCO
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
Discussion started by: ccc
16 Replies
7. HP-UX
Hi guys,
I'm moving some vPars from BL860c I2 and BL870c I2 using the DRD clone and relocation. In some case, as instance to upgrade to BL870c I2, the ERRATA document reports some additional driver to be added to the image made by the DRD and then recompile the kernel before the move to the... (0 Replies)
Discussion started by: cecco16
0 Replies
8. HP-UX
Hello Guys
Could you please let me know the command to find the resource (vCPU & Memory) capacity limit for the VPAR's (HPUX 11.23) on integrity Virtual host servers running HPUX 11.31 OS.
For eg. I want to know what is the max vCPU and memory that I can assign to one VPAR.
The Base Virtual... (0 Replies)
Discussion started by: prvnrk
0 Replies
9. HP-UX
Hi,
How can I shutdown a vpar from another vpar ? Please provide the command. Thanks. (0 Replies)
Discussion started by: snchaudhari2
0 Replies
LEARN ABOUT FREEBSD
fasthalt
REBOOT(8) BSD System Manager's Manual REBOOT(8)
NAME
reboot, halt, fastboot, fasthalt -- stopping and restarting the system
SYNOPSIS
halt [-lnpq] [-k kernel]
reboot [-dlnpq] [-k kernel]
fasthalt [-lnpq] [-k kernel]
fastboot [-dlnpq] [-k kernel]
DESCRIPTION
The halt and reboot utilities flush the file system cache to disk, send all running processes a SIGTERM (and subsequently a SIGKILL) and,
respectively, halt or restart the system. The action is logged, including entering a shutdown record into the user accounting database.
The options are as follows:
-d The system is requested to create a crash dump. This option is supported only when rebooting, and it has no effect unless a dump
device has previously been specified with dumpon(8).
-k kernel
Boot the specified kernel on the next system boot. If the kernel boots successfully, the default kernel will be booted on successive
boots, this is a one-shot option. If the boot fails, the system will continue attempting to boot kernel until the boot process is
interrupted and a valid kernel booted. This may change in the future.
-l The halt or reboot is not logged to the system log. This option is intended for applications such as shutdown(8), that call reboot
or halt and log this themselves.
-n The file system cache is not flushed. This option should probably not be used.
-p The system will turn off the power if it can. If the power down action fails, the system will halt or reboot normally, depending on
whether halt or reboot was called.
-q The system is halted or restarted quickly and ungracefully, and only the flushing of the file system cache is performed (if the -n
option is not specified). This option should probably not be used.
The fasthalt and fastboot utilities are nothing more than aliases for the halt and reboot utilities.
Normally, the shutdown(8) utility is used when the system needs to be halted or restarted, giving users advance warning of their impending
doom and cleanly terminating specific programs.
SEE ALSO
getutxent(3), boot(8), dumpon(8), nextboot(8), savecore(8), shutdown(8), sync(8)
HISTORY
A reboot utility appeared in Version 6 AT&T UNIX.
BSD
October 11, 2010 BSD