Its a mistake I have made while typing. It should be
. Even though when I try to ping or do nslookup with the IP-address, it does not return the domain name
I really need help here.
I am trying to sort out dns on a linux machine, but no matter what i do it just doesnt seem to work. I am sorting out dns for a domain, but even after putting the entries in /etc/named.boot for the localhost nslookup to work, referencing the correct file in /var/named -... (4 Replies)
I have installed a linux 9 router/firewall and have issues with outside DNS queries making it in. here are my IPTABLE rules, can anyone make some suggestions?
ETH1 is my outside facing Interface, ETH0 is my inside facing interface.
Accept If input interface is not eth1
Accept If protocol... (6 Replies)
Hello all,
I've a very strange thing hapenning in my Sys, I've configured the IP, DNS eveything for my internat connection, but Im only able to browse Redhat.com websites.
I cant open anyother site!!! :eek:
Im sure the internet is configured 'coz it displays the list of avail updates for... (11 Replies)
Using Redhat Linux Enterprise AS 4
can someone teach me how to setup a dns server for my webserver?
i've registered a domainname at mydomain.com
but when i type in the domain i register i cannot enter to my webserver.
someone told me that it is related with the DNS setting on my server.
i've... (2 Replies)
I have a installed Redhat Linux v5 on a new HP Pavillon PC. It has a dual boot with Vista. Booting from Vista, I can connect to the internet. However with Redhat I cannot connect to the internet.
I looked at the /etc/resolv.conf file in Redhat and there is no DNS entry there. From where do I... (28 Replies)
Dear All I want to configure DNS in redhat linux. i am following these steps but when i restart the services it is showing status failed. Please any body can help me on urgent basis.
#service named restart
Stopping named:
Starting named:
---------Edited in named.conf... (2 Replies)
I'd like to get some opnions on choosing DNS server:
Windows DNS vs Linux BIND comparrsion:
1) managment, easy of use
2) Security
3) features
4) peformance
5) ??
I personally prefer Windows DNS server for management, it supports GUI and command line. But I am not sure about security... (2 Replies)
Can someone help with a detail step-by-step oh how to configure DNS server on Linux Server.
-
I need to have 3 IP addresses map to a single hostname.
for clients
I'm a Linux rookie.
Thanks
Oscar (1 Reply)
Hi all
m newbie in linux and trying to setup my internal DNS server for local network.After messing with DNS for hours i am posting this.
i have configured /etc/resolve.conf, hostname with domain name in /etc/sysconfig/network file,/etc/hosts file with local host entry and zone file... (1 Reply)
what is the difference between Redhat Linux and Redhat Enterprise Linux. whereas Redhat linux have Server installation options too. (2 Replies)
Discussion started by: hananabbas
2 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)