HBA problem...? at SF V890 Post: 302461724

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

V890 Benefits over V880

Hello, Need to know all benefits\differences for V890 over V880. We are really keen to know about this. Can anybody please take out some time and get us the information. Regards, Narinder

2. Solaris

Problem installing Solaris on a V890 using flash

I am trying to use a flash image to install a v890. I have the image on another box. I am trying to use ftp to pull down the image. But, when i go though the install, choose flash, enter the ftp info, it can not ever connect to the server. I've never had this trouble before. There are 4...

3. Solaris

Installing Solaris 8 on a V890

Question, I have a new V890 preloaded witrh Solaris 10. Due to SW compatibility I need to run Sol 8 on the server. When running boot cdrom from the ok prompt, I get amessages looking for a location on the CDROM to find the startup install SW. The path must be different from what's on Sol 10 install...

4. UNIX for Advanced & Expert Users

Hardware HBA problem

I have worked with Qlogic (Sun) fiber cards a lot and with Emulex fiber cards only a little. Here is the scenario: I have a Sun 490 with 3 Emulex cards in it. A pair are for the 6120 array that is attached, the other is a direct attach so our SAN for Veritas Netbackup to back up the system.I...

5. Solaris

Atached storage to v890 --- very slow

Hello Experts, I have a StorEdge 3320 attached to V890, the problem is that I am copying data from v890's internal hdds to 3320's hdds, it is taking a-lot of time, the transfer is very slow. while I have checked the transfer from V890's internal hdd to another machines it is good. So, its mean...

6. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

7. Hardware

boot problem sun V890

hello i have a sun server V890 and it stops booting after adding 2 CPUs modules and gives me the following error message: Enabling system bus....... Done Initializing CPUs......... Done Initializing boot memory.. RAM-Copy CRC failure!Can't start: No image found FATAL: Can't find/decompress...

8. Solaris

v890 cannot boot

I just received a v890. I cannot get it to boot via CDROM nor can I access the SC prompt because I do not know the password. I am attempting to access it via serial cable to a Linux box. What is the best way to proceed?

9. Solaris

V890 serial console inaccessible

I am battling to get a V890 up and running. The system appears to have AUTOBOOT=false, so no OS comes up when it's powered on, and I do not have the credentials to get to the RSC management console. Output to ttya serial console ends at "Probing I/O buses", I assume because output is then being...

10. Solaris

Could you run this benchmark? (Especially if you have a V880 or V890)

Hi all I am currently using a T5120 to write and run some simulation code I've been working on which heavily relies on large matrix multiplication procedures. I am posting this to call out for some of you run and share the results of a simple benchmark I've written to compare the matrix...

LEARN ABOUT OPENSOLARIS

sf880drd

sf880drd(1M)						  System Administration Commands					      sf880drd(1M)

NAME

       sf880drd - Sun Fire 880 Dynamic Reconfiguration daemon

SYNOPSIS

       sf880drd

DESCRIPTION

       The  Sun  Fire  880  Dynamic Reconfiguration daemon, sf880drd, is part of the PCI and system bus hotplug framework. sf880drd starts at boot
       time. It has no configuration options and does not report any system status.

       sf880drd implements the Sun Fire 880 console-less system administration (per-slot pushbuttons and LED status indicators). It  also  manages
       various aspects of CPU/memory hotplug.

FILES

       /usr/platform/SUNW,Sun-Fire-880/lib/sf880drd

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWsfdr.u		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       svcs(1), cfgadm(1M), cfgadm_pci(1M), cfgadm_sbd(1M), svcadm(1M), attributes(5), smf(5)

NOTES

       The sf880drd service is managed by the service management facility, smf(5), under the service identifier:

	 svc:/platform/sun4u/sf880drd

       Administrative  actions	on  this  service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
       vice's status can be queried using the svcs(1) command.

SunOS 5.11							    13 Aug 2004 						      sf880drd(1M)

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

V890 Benefits over V880

Discussion started by: narinderd

2. Solaris

Problem installing Solaris on a V890 using flash

Discussion started by: BG_JrAdmin

3. Solaris

Installing Solaris 8 on a V890

Discussion started by: stocksj

4. UNIX for Advanced & Expert Users

Hardware HBA problem

Discussion started by: lm_admin_dh