09-21-2010
When the system first powers up, many Bios' show a table containing the amount of memory, processor type, serial and parallel port addresses etc.
Below this table, is a list showing all the PCI devices in the system. The listing shows (without column headings)
PCI Bus, Device, Function, Vendor Number, Vendor Part, Description.
The data from the first three columns is what you are after.
This data can change if you move a PCI device from one slot to another, or if you add a device, and re-configure the PCI bus in the CMOS.
All of the above occurs before you see the "Boot:" prompt.
This User Gave Thanks to jgt For This Post:
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I've just installed Unix SCO OpenServer System v in an Intel PC and Everithing ok, except just one thing, in the begining of the installation the wizard asked me about the mouse , i have a generic 3 buttons mouse and i took a logitech and did not work
i need to change the mouse configuration, ... (2 Replies)
Discussion started by: jimmyvaldes
2 Replies
2. UNIX for Dummies Questions & Answers
hello!
when i try to make my system dual boot with both win98 & sco open server 5.5 it doesn't work at all.neither win98 take start nor sco open server boots.what should i do ?
kindly help me
thanks (1 Reply)
Discussion started by: buntty
1 Replies
3. UNIX for Advanced & Expert Users
I am doing some work for a customer that is running SCO 5.0.2 openserver and they have lost their cd. Is there anyplace I can download it? I have a replacement being shipped but it will not be here for two days and they are down. Any ideals? (3 Replies)
Discussion started by: SCOoT
3 Replies
4. Filesystems, Disks and Memory
Hello all,
I'm trying to install SCO openserver 5 on a 2.5 Gig hard drive, and I tried fdisk and a low-level format of the drive. When I insert the boot diskette all seems fine, and it asks me to set the cd-rom and it sees it and reads from it. Well, I'm thinking all is well until right after I... (1 Reply)
Discussion started by: immulett
1 Replies
5. UNIX for Dummies Questions & Answers
I have just been made responsible for setting up Apache on our office SCO
box. I have searched the internet, but
haven't found any details that I can make
sense of. I'm unfamiliar with Unix and would appreciate any help members of
the forum have to offer. (1 Reply)
Discussion started by: cstovall
1 Replies
6. SCO
I need SCO Openserver 4.2. Please, give me distributive of that version SCO:eek: (0 Replies)
Discussion started by: caine
0 Replies
7. SCO
Even though IBM states that the x3500 server is Openserver 6.x compatible, it is still a bit of a trick to install SCO Openserver 6 to the machine because the standard method of installing the BTLD required to install the OS requires that the driver be written to a floppy which doesn't exist on... (3 Replies)
Discussion started by: qkrenge
3 Replies
8. SCO
hi
Howto install SCO Openserver 5.0.7 as a trial or howto get a trial license number? (0 Replies)
Discussion started by: ccc
0 Replies
9. SCO
Hi,
Im installing sco openserver 5 (OpenServer-5.0.7Hw-10Jun05_1800.iso) on a vmware server 1.0.4.
Installation is ok but on when x server is loading i just can login, mouse does not move and most of keyboard cases do not respond.
I choose usb mouse + french keyboard while installating, should i... (1 Reply)
Discussion started by: sup69
1 Replies
10. SCO
hi
Howto install iperf on SCO OpenServer 5.0.7? (0 Replies)
Discussion started by: ccc
0 Replies
DE(4) BSD Kernel Interfaces Manual DE(4)
NAME
de -- DECchip 21040, 21140, 21141, 21142, and 21143 PCI Ethernet interface driver
SYNOPSIS
de* at pci? dev ? function ?
Configuration of PHYs may also be necessary. See mii(4).
DESCRIPTION
The de driver supports Ethernet and Fast Ethernet interfaces based on the Digital Equipment Corporation DECchip 21040, 21140, 21141, 21142,
and 21143 model controllers for PCI bus.
21040 10BASE-T and AUI/BNC
21140 10BASE-T and 100BASE-TX
21141 10BASE-T and 100BASE-TX
21142 10BASE-T and 100BASE-TX
21143 10BASE-T and 100BASE-TX
Supported Network Interface Cards (NIC) include, but are not limited to:
Accton EN1207i
Cogent EM100
Asante AsanteFAST
DEC DE435
DEC DE450
DEC DE500
SMC 9332
Znyx NetBlaster ZX340 series (345, 348, 346)
Generally, if the NIC is for PCI bus, and the major controller chip has the DIGITAL logo on it, with one of the model numbers above, the de
driver should recognize and control it. Beware, however, that many NIC manufacturers change the Ethernet controller chip without changing
the product model number, and a physical inspection of the NIC, or a probe of the NIC with a PCI diagnostic tool is the only way to tell if a
real DEC TULIP controller is present.
Multi-port interfaces are typically configured as a PCI-PCI bridge with multiple de instances on the PCI bus on the other side of the bridge.
DEC sold its semiconductor division to Intel. In addition, there are many "knock-offs" of the DEC TULIP Ethernet controller chips; NICs
based on these chips are handled by the tlp(4) driver.
This de driver should not be confused with the NetBSD VAX de driver for the DEC DEUNA/DELUA Ethernet controller for UniBus.
SEE ALSO
ifmedia(4), intro(4), mii(4), pci(4), tlp(4), ifconfig(8)
http://www.adaptec.com/, http://www.asante.com/, http://www.smc.com/, http://www.znyx.com/
HISTORY
The de driver first appeared in NetBSD 1.1
AUTHORS
Matt Thomas <matt@3am-software.com>.
BSD
February 11, 2000 BSD