09-08-2010
I am assuming that the current tape drive is SCSI.
After you have done the backup on the old system, remove the tape drive and scsi host adapter, and install it in the new system.
Do the restore to from the tape.
If however, the SCSI host adapter is built into the motherboard, or is a ISA, EISA etc card that will not install in the new system, you can still copy the data across the network after you have created the new system.
Also, assuming that the 300gb is uncompressed data. You would need about 15 dual layer dvd's to do the copy.
8 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
I am using SCO Unixware 2.1 & some PC clients are connected, suddenly one message appearslike :
UX:strintercept error: dropping message
this message starts coming repeatedly & agtre some time system hangs.I had to reset the system & now the problem is not there.Please suggest, why this is... (0 Replies)
Discussion started by: paprch
0 Replies
2. UNIX for Dummies Questions & Answers
According to this thread: https://www.unix.com/showthread.php?t=1 one guy says However, I cannot find any sco unixware7 iso download link in their download section (http://wdb1.sco.com/clbk_web/owa/dwn_customer), is it really for free, and if that is true, where can I download it?
Thanks, (2 Replies)
Discussion started by: phalcos
2 Replies
3. SCO
Please help me in troubleshooting my problem in Samba?
I tried to instal Samba 3.0.24 in our SCO UnixWare 7.1.4 but after installing the nmbd daemon is not running.
When i check the syslog from /var/adm, the following error appears:
Sep 30 13:04:22 unixeei nmbd: bind failed on port 137... (0 Replies)
Discussion started by: eric_hing
0 Replies
4. SCO
hi,
anybody can give procedure for how to install oracle 8.0.5 in sco unixware 7.1.4. (0 Replies)
Discussion started by: prakrithi
0 Replies
5. SCO
hello,
sco openserver R5
the following error and it fails to load.
init: Command is respawning too rapidily
id: vm "/home/bin/stvm.sh"
init: Comand..etc
id: c02"/etc/start/autostart"
its trying to mount car diagnostic program in vmware, the program location
is in "start" i think? i... (1 Reply)
Discussion started by: hgibbs8129
1 Replies
6. SCO
(sorry my English, is really poor).
I have a SCO Unixware 7.1.1 and I need install in ML350 G3. Reading in google and HP web, make a floppy disks for install, but the options that I have is for network or floppy disk.
How install from CD with patch for HP smart array 532 ??
or
How... (5 Replies)
Discussion started by: xplertor
5 Replies
7. SCO
Hi, I'm new to this Unix world and have taken over looking after the I.T side of things at work, which includes the internal ERP system which runs on a UNIX SCO platform.
My initial worry is what state this is in as its been on site over 20 years.
What would be the first things to check on... (13 Replies)
Discussion started by: Mick_Dundee
13 Replies
8. SCO
Hi,
I need help to install SCO Unixware 7.0.1. Can any one help with any documentation or installation notes for SCO Unixware 7.0.1.
Thank you (1 Reply)
Discussion started by: farhandalvi
1 Replies
TRM(4) BSD Kernel Interfaces Manual TRM(4)
NAME
trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver
SYNOPSIS
trm* at pci? dev ? function ?
scsibus* at trm?
DESCRIPTION
The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.
HARDWARE
Supported SCSI controllers include:
Tekram DC-315 PCI Ultra SCSI adapter without flash BIOS and internal SCSI connector
Tekram DC-315U PCI Ultra SCSI adapter without flash BIOS
Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
For Tekram DC-390 PCI SCSI host adapter, use pcscp(4) driver.
For Tekram DC-310/U and DC-390U/UW/F PCI SCSI host adapters, use siop(4) driver.
SEE ALSO
cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), ss(4), st(4), uk(4), scsipi(9)
http://www.tekram.com/
AUTHORS
The trm driver was originally written for NetBSD 1.4/i386 by Erich Chen of Tekram Technology, and Rui-Xiang Guo rewrote the driver to use
bus_space(9) and bus_dma(9) for NetBSD 1.6.
BSD
November 6, 2001 BSD