SCO Unixware 7.1.4 Network Adapter Error Post: 302440398

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO Unixware 2.1

I am using SCO Unixware 2.1 & some PC clients are connected, suddenly one message appearslike : UX:strintercept error: dropping message this message starts coming repeatedly & agtre some time system hangs.I had to reset the system & now the problem is not there.Please suggest, why this is...

2. AIX

hacmp network adapter re-define

I have an LPAR in a P5 machine which has been setup in an HACMP cluster. The person who set it up allocated the wrong network adapter (en) to the persistent network. For the life of me I cannot find where I can re-assign this adapter. Anyone able to help me as I am tearing my hair out and do not...

3. AIX

change network adapter

hello i've need to change network adapter on machine H80 aix 4.3.3 hacmp ( ent0 ) what i need to do after the new adapter installed on the machine? thanks best regards ariec

4. SCO

sco unixware + oracle 8.0.5

hi, anybody can give procedure for how to install oracle 8.0.5 in sco unixware 7.1.4.

5. AIX

How to active this network adapter?

When I configure two VIO Servers, VIOS1 used to ping its gateway, after I configured second VIOS2, VIOS1 cannpt ping its gateway, when I run this command: entstat -all ent#|grep -i priority Priority: 5 Active: False How to make Active to True?

6. UNIX for Dummies Questions & Answers

External Network Adapter for Solaris 10

Hi All, I am new here - this is my first post. I have installed Solaris 10 5/09 on my Dell M6300. The install went well, but the Dell's onboard network card is the Broadcom BCM5756ME Gigabit Ethernet - and sadly no Solaris driver exists for it. The Solaris 10 install just jumped by the...

7. SCO

VMware and SCO Unixware 7.1.4 Network issue

I am haveing a problem with my VMware ESXi 4.1 server and a virtual SCO UnixWare 7.1.4 server that I need for a legacy application for my company. The problem seems simple but I can't find a solution. The UnixWare (UW) server is a clean install and patched as SCO recommends. I am able to telnet to...

8. SCO

Sco UNIXware 7.1.4 error in booting

Hello Dears, I have fujitsu tx300 S7 server with installed sco unixware 7.1.4, Now the /etc is corrupted and the sco cannot boot. There is no emergency disk or cd, I'm trying to fix this with reinstalling unixware again, but the problem now that when i try to install the HBA driver that i...

9. SCO

Can not recognize network adapter SCO UNIX in HP z400

hi .I've installed an operating system SCO in HP Z400 and network cards ZyXEL model FN312 with Chipset RTL8139D put it on .network card installed but do not display network card with command ifconfig -a in list and just show loopback. show message : dlpid:unable to open network adapter driver...

LEARN ABOUT NETBSD

trm

TRM(4)							   BSD Kernel Interfaces Manual 						    TRM(4)

NAME

     trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS

     trm* at pci? dev ? function ?
     scsibus* at trm?

DESCRIPTION

     The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

HARDWARE

     Supported SCSI controllers include:

	   Tekram DC-315 PCI Ultra SCSI adapter without flash BIOS and internal SCSI connector

	   Tekram DC-315U PCI Ultra SCSI adapter without flash BIOS

	   Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS

	   Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS

	   Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector

     For Tekram DC-390 PCI SCSI host adapter, use pcscp(4) driver.

     For Tekram DC-310/U and DC-390U/UW/F PCI SCSI host adapters, use siop(4) driver.

SEE ALSO

     cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), ss(4), st(4), uk(4), scsipi(9)

     http://www.tekram.com/

AUTHORS

     The trm driver was originally written for NetBSD 1.4/i386 by Erich Chen of Tekram Technology, and Rui-Xiang Guo rewrote the driver to use
     bus_space(9) and bus_dma(9) for NetBSD 1.6.

BSD
								 November 6, 2001							       BSD

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO Unixware 2.1

Discussion started by: paprch

2. AIX

hacmp network adapter re-define

Discussion started by: johnf

3. AIX

change network adapter

Discussion started by: ariec

4. SCO

sco unixware + oracle 8.0.5

Discussion started by: prakrithi

5. AIX

How to active this network adapter?

Discussion started by: rainbow_bean

6. UNIX for Dummies Questions & Answers

External Network Adapter for Solaris 10

Discussion started by: soulmerchant