JMIDE(4)						   BSD Kernel Interfaces Manual 						  JMIDE(4)

NAME

     jmide -- JMicron Technology JMB36x PCIe to SATA II/PATA controller driver

SYNOPSIS

     jmide* at pci? dev ? function ? flags 0x0000
     ahcisata* at jmide?

DESCRIPTION

     The jmide driver supports the JMicron Technology JMB36x IDE controllers.

     These PCI-e controllers exist in different flavors (1 or 2 PATA Ultra/133 ports and/or 1 or 2 SATA-II ports), and are highly flexible.  The
     SATA ports can be attached to the integrated AHCI controller or attached to the PCI IDE channels in PATA emulation, in either single-drive
     emulation on each PCI IDE channels, or in master/slave emulation on one of the PCI IDE channels.

     When enabled, the AHCI controller can either be on the PCI function 0 or function 2.  The PCI IDE controller can also be on either PCI func-
     tion, and can share the PCI function with AHCI.  The jmide driver supports both the AHCI controller and PCI IDE controller in various config-
     urations.

SEE ALSO

     ahcisata(4), ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

AUTHORS

     The jmide driver was written by Manuel Bouyer.

BSD
								   July 2, 2007 							       BSD