04-17-2010
bash script too many fields wraps to multiple lines
Hello. I'm trying to write a script to take a 5 field file, do some math, and extend it to 9 fields. Problem is, the script keeps wrapping it to two lines, even tho 9 fields, tab separated (even comma separated) doesn't fill the screen. Even if it did, I'm eventually copying it to an excel sheet anyways, and it really NEEDS to be one line. I've tried things like paste with no luck. It HAS to be possible to do one line, b/c it's way too inconvenient otherwise. Here's an example:
file = adder.sh
PHP Code:
# this wraps to two lines :(
echo "$f1\t$f2\t$f3\t$f4\t$f5\t$cost\$time\t$rank\t$analysis" > file.txt
# this also forcefully wraps to two lines :(
echo "$f1\t$f2\t$f3\t$f4\t$f5" > file1
echo "$cost\$time\t$rank\t$analysis" > file2
paste file1 file2 > file.txt
# this wraps to two lines
echo "$f1\t$f2\t$f3\t$f4\t$f5\t$cost\$time\t$rank\t$analysis" > file.txt
# this also forcefully wraps to two lines
echo "$f1\t$f2\t$f3\t$f4\t$f5" > file1
echo "$cost\$time\t$rank\t$analysis" > file2
paste file1 file2 > file.txt
any help would be much appreciated
10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
I've looked at the join command which is able to perform what I need on two rows with a common field, however if I have more than two rows I need to join all of them.
Thus I have one file with multiple rows to be joined on an index number:
1 randomtext1
2 rtext2
2 rtext3
3 rtext4
3 rtext5... (5 Replies)
Discussion started by: crimper
5 Replies
2. Shell Programming and Scripting
i want to replace mistaken quotes in line starting with tag 300 and relocate the quote in the correct position so the input is
223;25
224;20100428064823;1;0;0;0;0;0;0;0;8;1;3;9697;18744;;;;;;;;;;;;
300;X;Event:... (3 Replies)
Discussion started by: wradwan
3 Replies
3. Shell Programming and Scripting
Hi there, I have the following output,
# raidctl -l
RAID Volume RAID RAID Disk
Volume Type Status Disk Status
------------------------------------------------------
c0t1d0 IM OK c0t1d0 OK
... (4 Replies)
Discussion started by: rethink
4 Replies
4. Shell Programming and Scripting
Greetings. I am using SED to cleanup files that are laid out like so:
ReceiverID=028936004663
SerialNumber=WD-WCAV95708405
Currenttemp=44C
PowerOnHours=3663h
ReceiverID=028923894902
SerialNumber=WD-WCAV9A766701
Currenttemp=49C
PowerOnHours=2215h
My boss wants files like this one... (5 Replies)
Discussion started by: alan
5 Replies
5. Shell Programming and Scripting
Please see the following code, between "status" and "OK" exists many spaces, I want to get status OK . how to ignore multi spaces? If tab exists in the spaces, how to ignore it ?
Is there other commands can replace cut?
$ echo 'drv status OK'| cut... (3 Replies)
Discussion started by: 915086731
3 Replies
6. Shell Programming and Scripting
Hey guys. I know pratically 0 about Linux, so could anyone please give me instructions on how to accomplish this ?
The distro is RedHat 4.1.2 and i need to find and replace a multiple lines string in several php files across subdirectories.
So lets say im at root/dir1/dir2/ , when i execute... (12 Replies)
Discussion started by: spfc_dmt
12 Replies
7. Shell Programming and Scripting
Background:
I am writing a script to help me automate tweaks and things I apply to a custom Android rom I developed. I am on the very last part of my script, and I am stuck trying to find the right command to do what I seek.
When I build roms from source, a file called updater-script is... (8 Replies)
Discussion started by: Silverlink34
8 Replies
8. Shell Programming and Scripting
If a file has following kind of data, comma delimited
1,2,3,4
1
1
1,2,3,4
1,2
2
2,3,4
My required output must have only 4 columns with comma delimited
1,2,3,4
111,2,3,4
1,222,3,4
I have tried many awk command using ORS="" but couldnt progress (10 Replies)
Discussion started by: mdkm
10 Replies
9. Shell Programming and Scripting
Im looking for a bash solution that will use Regular Expressions (not perl, sed or awk) to check the example data below and then give me a status.
which would be just simply Match or Mismatch.
SYS PS1 is present.
Fan status: Normal
Input Voltage status: Normal
... (5 Replies)
Discussion started by: popeye
5 Replies
10. Shell Programming and Scripting
Hi,
I want to know if there is any simple approach to SUM a field based on group by of different fields
for e.g.
file1.txt contains below data
20160622|XXX1||50.00||50.00|MONEY|Plan1|
20160622|XXX1||100.00||100.00|MONEY|Plan1|
20160623|XXX1||25.00||25.00|MONEY|Plan1|... (3 Replies)
Discussion started by: cnu_theprince
3 Replies
DIFF3(1) General Commands Manual DIFF3(1)
NAME
diff3 - 3-way differential file comparison
SYNOPSIS
diff3 [ -exEX3 ] file1 file2 file3
DESCRIPTION
Diff3 compares three versions of a file, and publishes disagreeing ranges of text flagged with these codes:
==== all three files differ
====1 file1 is different
====2 file2 is different
====3 file3 is different
The type of change suffered in converting a given range of a given file to some other is indicated in one of these ways:
f : n1 a Text is to be appended after line number n1 in file f, where f = 1, 2, or 3.
f : n1 , n2 c Text is to be changed in the range line n1 to line n2. If n1 = n2, the range may be abbreviated to n1.
The original contents of the range follows immediately after a c indication. When the contents of two files are identical, the contents of
the lower-numbered file is suppressed.
Under the -e option, diff3 publishes a script for the editor ed that will incorporate into file1 all changes between file2 and file3, i.e.
the changes that normally would be flagged ==== and ====3. Option -x (-3) produces a script to incorporate only changes flagged ====
(====3). The following command will apply the resulting script to `file1'.
(cat script; echo '1,$p') | ed - file1
The -E and -X are similar to -e and -x, respectively, but treat overlapping changes (i.e., changes that would be flagged with ==== in the
normal listing) differently. The overlapping lines from both files will be inserted by the edit script, bracketed by "<<<<<<" and ">>>>>>"
lines.
For example, suppose lines 7-8 are changed in both file1 and file2. Applying the edit script generated by the command
"diff3 -E file1 file2 file3"
to file1 results in the file:
lines 1-6
of file1
<<<<<<< file1
lines 7-8
of file1
=======
lines 7-8
of file3
>>>>>>> file3
rest of file1
The -E option is used by RCS merge(1) to insure that overlapping changes in the merged files are preserved and brought to someone's atten-
tion.
FILES
/tmp/d3?????
/usr/libexec/diff3
SEE ALSO
diff(1)
BUGS
Text lines that consist of a single `.' will defeat -e.
7th Edition October 21, 1996 DIFF3(1)