I have to have my script wait for another script when it is being executed. I used
Code:
fuser -f scriptname
to get the PID of the script but when passed the PID to wait command, the command does not accept it as a PID.
Below is the example:
my.script1:
Code:
fuser_result=`fuser -f my.script2`
echo " PID using my.file is : $fuser_result"
wait $fuser_result
echo " Script2 Complete. Now continue processing"
Before I ran the script, I made sure my.script2 is open and being executed
my.script1 does not wait for my.script2 at all. The last echo statement runs immediately after the wait statement.
Also the echo PID statement gives me outputs like below:
I run:
Code:
PID using my.file is : 3436698
II run:
Code:
PID using my.file is : 3436698 942486
III run:
Code:
PID using my.file is : 19734589
From this its clear that the wait command did not see the PIDs from fuser command as PIDs. Is there any way to format the same so that I can make my wait command work?
Also as shown in II run sometimes, I get more than 1 PID from fuser. Let me know how to handle those kind of situations too!
Hi all,
I have the following script:
-------------------------------------------------
#SCRIPT TO CHECK WHO HAS ACCESSED THE LOG/FILE IN PAST 'N' MINUTES, AND MAIL ACCORDINGLY.
MYPATH="/clocal/mqbrkrs/user/mqsiadm/sanjay/"
MAIL_RECIPIENTS="vg517@dcx.com"
Subject="File accessed in last... (6 Replies)
Hi folks,
Please advise which command/command line shall I run;
1) to display the command and its output on console
2) simultaneous to save the command and its output on a file
I tried tee command as follows;
$ ps aux | grep mysql | tee /path/to/output.txt
It displayed the... (7 Replies)
Hi all,
From the below file I need to fetch the data in the below output format.
ToolInstanceID "diw_dm_sales"
Identifier "Sales_source_load"
Promt Default ParamType ParamLength ParamScale
"Database_Name" "ORCL" "0" "0" "0"
Identifier "retail_source_load"
Promt Default... (4 Replies)
Hi
i have a file which have a pattern like this
Nov 10 session closed
Nov 10 Nov 9 08:14:27 EST5EDT 2010 on tty .
Nov 10 Oct 19 02:14:21 EST5EDT 2010 on pts/tk .
Nov 10 afrtetryytr
Nov 10 session closed
Nov 10 Nov 10 03:21:04 EST5EDT 2010
Dec 8 Nov 10 05:03:02 EST5EDT 2010
... (13 Replies)
Hi,
Can anyone explain me the difference between fsuer and lsof commands. As per my knowledge both the commands are used to find the processes used by the current file system or user. Apart from that what is the major difference between these commands (3 Replies)
Hi,
Not sure whether there is a fuser alternative or any better way to check for file in use or not.
I am wanting to check whether files are in use or not before removing them. Using fuser, the awk seems to be giving me 'weird' output not to mention that it is giving me 2 lines instead of... (0 Replies)
I am using UNIX to create a script on our system. I have setup my commands to append their output to an outage file. However, some of the commands return no output and so I would like something to take their place.
What I need
The following command is placed at the prompt:
TICLI... (4 Replies)
Hi there,
What is the equivalent of fetch command in Ubuntu/Cygwin. My purpose is to modify the code in such a way that I can use fetch.
#!/bin/sh
#============================================================================
# $Id: ios-http-auth.sh,v 1.1 2001/06/29 00:59:44 root Exp root... (1 Reply)
Discussion started by: alvinoo
1 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)