One further thing to check: when booting, enter the GRUB shell from the menu (by pressing 'e'), and try to verify that the system can see the USB disk. Because a BIOS being able to boot off an USB drive doesn't mean that the bootloader can see it too, or even at the same location as the booted system.
Hi Pludi,
the
shows that grub idenfies sdb as hd1 by its own notation.
I have installed Linux 7.2 on a IBM xseries 235 server with 5 scsi hard drives and ServerRaid-5i Ultra320 scsi controller.
I started my installation by configuring the raid controller. I created 2 arrays, raid 1 and raid5. I then proceeded to install Linux and load the drivers.
After the... (2 Replies)
I have an issue with booting NTFS partitions with Grub.
I have two HHD
1st HDD with Red Hat 9.0 and Grub as bootloader
2nd HDD with 8 Win partitions all ntfs.
I have added the following line in my grub.conf:
title Windows2000/Domino 6
root (hd1,0)
makeactive
chainloader +1
When I... (4 Replies)
Hi!
I got some serious problems with booting the computer. When started it prints GRUB GRUB GRUB all over the screen. tchan on #grub tried to help me but with no result. Here is the log.
Mabey there is something that we have missed?:confused: (3 Replies)
my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot.
The machine come up to grub prompt.
I tried the following from grub prompt
root (hd0, then press tab key
partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
Hello,
I'm working on a x86 machine with 3 disks installed. I need to boot from disk to disk, but I cannot figure out how to do this using Grub. The O/S is Solaris 10 and grub version is 0.95
Can anyone give me any help with this?
Thanks,
James. (0 Replies)
I dont know what the heck happen but one of our DBAs was working on a cluster for oracle. Rebooted the box and viola, the OS won't load. After the POST message, I get a blinking cursor on the upper left hand corner. Doesn't even say "GRUB" or anything, it just blinks.
I tried going into rescue... (1 Reply)
Hi,
i am running an old Opensolaris 5.11 snv_111b on an x86 server. After almost 4 years of successful service, last night out of the blue started to refuse all connections to it's services, ssh, http,etc. The only visible solution at that time was a restart. But now instead of booting the... (2 Replies)
Hi Solaris 10 Experts,
I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk... (0 Replies)
Hi, someone knows how can I boot my OS or cdrom from a Grub Minimal_Bash? :confused: sorry, I´m a dummy
I explain, when I start loading the OS, I get errors, and ends up in the grub bash. This is the minimal_bash and I have no idea of any command. It tells me "unknow partition". The problem is... (0 Replies)
Discussion started by: veravera
0 Replies
LEARN ABOUT LINUX
grub-install
GRUB-INSTALL(8) System Administration Utilities GRUB-INSTALL(8)NAME
grub-install - install GRUB to a device
SYNOPSIS
grub-install [OPTION] install_device
DESCRIPTION
Install GRUB on your drive.
-h, --help
print this message and exit
-v, --version
print the version information and exit
--modules=MODULES
pre-load specified modules MODULES
--boot-directory=DIR
install GRUB images under the directory DIR/grub instead of the /boot/grub directory
--grub-setup=FILE
use FILE as grub-setup
--grub-mkimage=FILE
use FILE as grub-mkimage
--grub-mkrelpath=FILE
use FILE as grub-mkrelpath
--grub-mkdevicemap=FILE use FILE as grub-mkdevicemap
--grub-probe=FILE
use FILE as grub-probe
--no-floppy
do not probe any floppy drive
--allow-floppy
Make the drive also bootable as floppy (default for fdX devices). May break on some BIOSes.
--recheck
probe a device map even if it already exists
--force
install even if problems are detected
--disk-module=MODULE
disk module to use
INSTALL_DEVICE can be a GRUB device name or a system device filename.
grub-install copies GRUB images into /boot/grub, and uses grub-setup to install grub into the boot sector.
REPORTING BUGS
Report bugs to <bug-grub@gnu.org>.
SEE ALSO grub-mkconfig(8), grub-mkimage(1), grub-setup(8), grub-mkrescue(1)
The full documentation for grub-install is maintained as a Texinfo manual. If the info and grub-install programs are properly installed at
your site, the command
info grub-install
should give you access to the complete manual.
grub-install (GRUB) 1.99-12ubuntu5 October 2011 GRUB-INSTALL(8)