Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
aix 4.3
I get the following error from the errpt log
BD797922 0306170008 P H enclosure0 SUBSYSTEM FAILURE
I'm not clear on this kind of error. It never happened to me.
What do this errors mean, and how do I clear or solve them?
Any help is appreciated. (2 Replies)
Hello All,
Does some one have any idea about the subsystem component failure. Errpt command throws below errors for my server :-
# errpt
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
B9735AF4 0304222408 P H hdisk5 SUBSYSTEM COMPONENT FAILURE
B9735AF4 0304222408 P H... (1 Reply)
Hello,
I'm trying to generate a subsystem which supports startsrc, stopsrc and refresh
I want to specify special arguments in case of stopsrc and refresh
for example:
startsrc:
/bin/testscript start
stopsrc:
/bin/testscript stop
refresh:
/bin/testscript restart
which should be... (0 Replies)
All,
I enabled PAM and aged a password, but when I login it asks me for the current password then says password unchanged after entering the current password. Is this a bug? My security dept is going to want me to enable password aging and I'm stuck!
Any help on what the issu is?
... (6 Replies)
I have several ssh servers *running aix 5.3 and they respond to sftp requests just fine, but I have one that requires clients to specify the path to the sftp server using the -s flag which is*/usr/sbin/sftp-server
I check the sshd_config across all servers and they are the same. *The other... (1 Reply)
Recently moved a HP Unix B.10.20 system from US to Thailand, and everything is work well in US but after we changed:
1. set_parms ip_address (change the IP to TH range)
2. set_parms addl_netwrk (change the Subnet, Gateway, Domain name, DNS Svr Name, and DNS IP)
3. vi /etc/hosts (to commented... (4 Replies)
All,
I wanted to get others opinions on providing root access to vendors. I have a vendor that is claiming to need full root sudo access to complete a one time system set up for their software. The system is on our corporate network and we never provide this level of access. Not only that,... (7 Replies)
Discussion started by: hburnswell
7 Replies
LEARN ABOUT NETBSD
artsata
ARTSATA(4) BSD Kernel Interfaces Manual ARTSATA(4)NAME
artsata -- Intel i31244 Serial ATA disk controller driver
SYNOPSIS
artsata* at pci? dev ? function ? flags 0x0000
options PCIIDE_I31244_DISABLEDMA
DESCRIPTION
The artsata driver supports the Intel i31244 Serial ATA and controllers, and provides the interface with the hardware for the ata(4) driver.
The 0x0002 flag forces the artsata driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debug-
ging aid, or to work around problems where the SATA controller is wired up to the system incorrectly.
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)BUGS
Early samples of the Intel i31244 Serial ATA controller revision 0 had a bug affecting DMA data transfers. Full production samples have been
fixed, but have the same revision number. The PCIIDE_I31244_DISABLEDMA option can be used to disable DMA on the buggy revisions.
BSD February 12, 2005 BSD