I understand that by putting in entries into the /etc/inittab file. We can actually call the our scripts during startup.
mkitab "start_server:2:once:sh /scripts/startserver.sh"
Would the system wait for startserver.sh finish executing before it goes to another entry? and how long would it... (1 Reply)
I need to make a script to start the postfix service on a server when the machine starts up.
I have a script written below, which I think will work, but I am confused on how the rc2.d & rc3.d etc directories actually work.
If I enter the script below, and stick it in the rc3.d directory,... (1 Reply)
Hello!
unix os is OSF1 CP1 V4.0 878 alpha.It startup os normally.But when i use
a command to run application, it restart within 10 sec.I have no spare harddisk& application to reinstall.When i asked this problem at this forum, it replys that start up scripts are screwed and to mount each... (12 Replies)
I've created the following link in order to startup apache tomcat on startup, however, it does not seem to run. Am I missing something out?
:confused:
/etc/init.d
lrwxrwxrwx 1 root root 16 Sep 5 14:59 K73ypbind -> ../init.d/ypbind
lrwxrwxrwx 1 root root 16 Sep 11 13:09 S100tomcat ->... (5 Replies)
Hi all
We have HP UX 11.23 installed on 4 RISC servers (2 oracle databases, 2 Oracle App Servers) , we are in a construction period , so the power failure may happen more than once a day.
I need to learn how to create an automatic startup services as in Windows, if we know that the services... (5 Replies)
Hi,
I am trying to start services on system reboot on AIX.
Have put the S* links under rd2.d & K* links under other rc*.d
At the moment, all scripts are getting called.
However, the services aren't coming up.
Where can i find the logs for these to check what failed. (8 Replies)
hi,
If we place Sxx (startup script) and Kxx(shutdown script) in /etc/rc.d/rc2.d,then it would start and stop automatically(assume they are linked to other script that actually starts/stops).
is there really a link needed here to /etc/rc.d/init.d? if not,what is the use of this directory..?... (1 Reply)
Can someone please tell me how to run xsession startup scripts whenever I start or after I restart my X session? I'm not trying to do anything fancy I just want this to run. This makes life a lot easier when I use a dual monitor.
xrandr --output VGA1 --mode 1024x768 --rate 60 (7 Replies)
Hi all,
I have a server in maintenance mode and need to boot it up. Its due to a broken service "RepX".
I need to stop the service from trying to start at boot up but i can't find where it is booting up from... it is not in any of the rcX.d directories and the two locations i have found it... (6 Replies)
Edit: So sorry! I really didn't do a good job of clearly stating what I needed. Going to completely rewrite my post so everything is clearly stated.
I'm having trouble writing a shell startup script for a linux server. It uses the bash shell if I remember correctly. I'm trying to write it so... (9 Replies)
Discussion started by: Pyitoechito
9 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)