What should be hostname for second network interface? Post: 302377786

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Network Interface

Hi ! Does anyone know how can i get information about my network interface ... if it works in half or full duplex mode !! Thx in adivance ! Witt

2. Solaris

I recently brought up a second network interface adapter in my Solaris 8 box. I configured the /etc/hostname.interface (hostname.ce1 in this case) with the hostname of the new adapter. I then added that hostname to the /etc/hosts file. Problem is when I reboot the ce1 interface is plumbed, but...

3. Linux

Get info on network interface

Hello everybody, How can link network interface to the output of lspci -vv. Basicly i need to know who is the manufacturer of a specific interface, for example eth0 {Is it an Intel, or Broadcome, or something else}. Is there a way to find that out? Thanx

4. Solaris

Confused with entries in /etc/hostname.<interface> file...

Hi.. Every one, I have servers installed with solaris 10.We have configured our servers for IPMP and we have respective entries in /etc/hostname.<interface> for every physical interface. for example one of the file contains : # more /etc/hostname.ce6 super-ce6 netmask + broadcast + group...

5. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks

6. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that.

7. IP Networking

Network interface-

Hello, Please what's the difference between: AND Thank you so much

8. IP Networking

network interface -

Hello, Please, how can i create a network interface with a routable IP address on linux (ubuntu) ? AND How can i desactivate an interface? Thank you so much for help.

9. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

10. UNIX for Dummies Questions & Answers

Adding a network interface to a bonded interface

I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without...

LEARN ABOUT CENTOS

nca.if

nca.if(4)							   File Formats 							 nca.if(4)

NAME

       nca.if - the NCA configuration file that specifies physical interfaces

SYNOPSIS

       /etc/nca/nca.if

DESCRIPTION

       Specify	the  physical interfaces for which the Solaris Network Cache and Accelerator ("NCA") feature will be configured in the nca.if con-
       figuration file. List the physical interfaces in the file, one per line. To configure NCA to listen on all physical interfaces  present	on
       the system backed by a hostname.{interface_name}, then list only an asterik ("*") in nca.if.

       When  the ncakmod(1) initialization script is invoked during system boot, it will attempt to configure each physical interface specified in
       the nca.if file by using ncaconfd(1M). Note that there must be an accompanying hostname.{interface_name} file and an  entry  in	/etc/hosts
       for the contents of hostname.{interface_name}.

       You must reboot in order to implement changes to the nca.if file.

EXAMPLES

   x86
       Example 1: nca.if on x86

       The following is an example of an nca.if file that would be used on an x86 system:

       iprb1
       iprb6
       iprb8

   SPARC
       Example 2: nca.if on SPARC

       The following is an example of an nca.if file that would be used on a SPARC system:

       hme2
       hme3
       hme4

   All Platforms
       Example 3: Configuring NCA to Listen on All Physical Interfaces

       The following example shows the contents of an nca.if file that would be used to configure either platform to listen on all physical inter-
       faces present on the system:

       *

FILES

       /etc/nca/nca.if	       Lists the physical interfaces on which NCA will run.

       /etc/hostname.{}{0-9}   Lists all physical interfaces configured on the server.

       /etc/hosts	       Lists all host names associated with the server. Entries in  this  file	must  match  with  entries  in	/etc/host-
			       name.{}{0-9} for NCA to function.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWncar			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       nca(1), ncab2clf(1), ncakmod(1), ifconfig(1M), ncakmod.conf(4), ncalogd.conf(4), attributes(5)

       System Administration Guide: IP Services

SunOS 5.10							    18 Feb 2003 							 nca.if(4)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Network Interface

Discussion started by: witt

2. Solaris

/etc/hostname.interface file

Discussion started by: ghuber