Sponsored Content
Operating Systems Solaris Three questions - migrating to branded zone Post 302374582 by sbk1972 on Wednesday 25th of November 2009 02:57:53 AM
Old 11-25-2009
Hi there

Yes, you are basically removing all the traces of the veritas boot / root encapsulation. Im not sure the /etc/system file is really used in a zone, infact most of it will be ignored. When you install the flar copy, on boot it will mention that certain paramters in the system file are ignored, so you might find that most of the veritas components are already ignored, so these steps are for completeness.

Removing the veritas db and checking the vfstab is more to stop errors coming on script, via boot up.

When you've made the flar dump, you've obviously told it what mounts to included, e.g. u01 / u02 /u03, when constructing the zone, you made new mounts, named the same, but using storage allocated to it via the global zone, or directly mounted into the zone.

The underlying type of the source f/s is irelevant, so once the dump is extracted back into the zone, your away.

The errors at boot up are regarding vxdmps, databases, and vfstab rubbish, so by removing all these before you boot, will make a clearer startup.

I will test it out, created a test zone, pour the dump into it, and see. Good thing about zones, is that once you shut them down, you can alter them via the global zone, aka, just cd down to the area where the install is, and amend files.

SBK
 

10 More Discussions You Might Find Interesting

1. Solaris

zone questions

Hi, I would like to implement zones in solaris 10 to simulate 2 nodes on a single solaris 10 using zones. Can some one tell me what does it mean by global and non-global zones Also write what is the use of using non global or global and permissions like read-write on zones. My requirement... (3 Replies)
Discussion started by: upengan78
3 Replies

2. Solaris

Postprocess issue installing Solaris 9 Branded Zone

Hello, I am attempting to install a newly configured Solaris 9 zone using the flash archive image provided on the sun website. Each time I run the install I get a failure during the Postprocess: Creating mount points. Following is the log: Log File: /var/tmp/s9-zone.install.25457.log... (0 Replies)
Discussion started by: brialt1
0 Replies

3. Solaris

Prerequisites for Solaris10 Branded Zone within Solaris 11 Express

Dear all, we are trying to install a Solaris10 Branded Zone on a Solaris 11 Express system getting this message: ***The image patch level is downrev for running in a solaris10 branded zone*** The Sparc Solaris 10 system is running Release 11/06 and Patch 119254-70 is installed. Does the... (0 Replies)
Discussion started by: xunil321
0 Replies

4. Solaris

Solaris 9 branded zone on a Solaris 10 server

I have a T5220 running Solaris 10. I have a application that can only run on Solaris 9. I want to build a branded Solaris 9 zone for this application on the Solaris 10 Server. What steps would I need to accomplish this? (2 Replies)
Discussion started by: soupbone38
2 Replies

5. Solaris

Branded Solaris 10 zone no network

I am trying to create a branded 10 zone on a Solaris 11.1 control domain. I am using a flar image (cpio) from an existing LDOM. Here are the steps taken after flarcreate. #zonecfg -z <device> >create -b >set brand=solaris10 >set zonepath=/zonez/<device> >set ip-type=exclusive >add net... (1 Reply)
Discussion started by: aeroforce
1 Replies

6. Solaris

NFS server on Solaris 10 branded zone

I am trying to get a NFS share on a Solaris 10 branded zone. I have read that this is not possible...but I was hoping someone here could tell me different. share -F nfs -o ro,anon=0 /dir This would really surprise me that you cannot do this. Thanks (2 Replies)
Discussion started by: aeroforce
2 Replies

7. Solaris

Solaris 10 branded zone with IPMP

All. I am trying to create a 10 branded zone on a Sol 11.1 T5. The Global is using IPMP...so aggregating is out of the question. Has anyone successfully created a branded zone with IPMP? If they have can you please show me the steps you took to get this to run. Thanks (4 Replies)
Discussion started by: aeroforce
4 Replies

8. Solaris

Branded zone Solaris 9

Hi, I want to install branded zone sol 9 in sol 10. I keep getting same error. Please advice me. Thanks. (12 Replies)
Discussion started by: mzainal
12 Replies

9. Solaris

Solaris 11 Global zone patching having Solaris 10 branded zone

I am planning to do solaris 11 global zone patching having solaris 10 branded zone. I have a doubts on step 8 specially Can someone clear my step 8 doubts or if anything wrong between step 1 to step 9 please correct that also as I have pretty good idea about Step 10 mean patching in solaris 10... (2 Replies)
Discussion started by: amity
2 Replies

10. Solaris

Help setting up a bhyve branded zone

So I started with following the example on the omnios page for bhyve (sorry, I can't provide the link because I'm a post shy of the 5 to give a URL): And found that in the end I was able to create a running bhyve zone, but accessing it via zlogin results in a blank console. I've tried Debian 9... (14 Replies)
Discussion started by: stratacast1
14 Replies
rem_drv(1M)															       rem_drv(1M)

NAME
rem_drv - remove a device driver from the system SYNOPSIS
rem_drv [-b basedir] device_driver The rem_drv command informs the system that the device driver device_driver is no longer valid. If possible, rem_drv unloads device_driver from memory. rem_drv also updates the system driver configuration files. If rem_drv has been executed, the next time the system is rebooted it automatically performs a reconfiguration boot (see kernel(1M)). The following options are supported: -b basedir Sets the path to the root directory of the diskless client. Used on the server to execute rem_drv for a client. The client machine must be rebooted to unload the driver. Note - The root file system of any non-global zones must not be referenced with the -b option. Doing so might damage the global zone's file system, might compromise the security of the global zone, and might damage the non-global zone's file system. See zones(5). Example 1: Removing the sd Driver The following example removes the sd driver from use: example% rem_drv sd Example 2: Removing a Diskless Client The following example removes the driver from the sun1 diskless client. The driver is not uninstalled or unloaded until the client machine is rebooted. example% rem_drv -b /export/root/sun1 sd Note the caveat on the use of the -b option in the description of that option, above. See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ add_drv(1M), kernel(1M), update_drv(1M), attributes(5), devfs(7FS) 6 Apr 2005 rem_drv(1M)
All times are GMT -4. The time now is 12:42 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy