Sponsored Content
Operating Systems Solaris Cannot boot from CDROM nor get to OK prompt SunV210 Post 302363923 by kharjahn on Wednesday 21st of October 2009 03:06:40 PM
Old 10-21-2009
Maybe you have bigger issues, like dead or faulty hardware. try to check the hardware from the SC. I believe "showfaults" or "showfaults -v" is the first thing to look at. Also try to boot without the harddrive and a cd in there.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

boot cdrom error

I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get, Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args: The file just loaded does not appear to be executable. Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
Discussion started by: merlin
3 Replies

2. Red Hat

linux will not boot, boot to grub prompt

my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot. The machine come up to grub prompt. I tried the following from grub prompt root (hd0, then press tab key partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
Discussion started by: hassan2
7 Replies

3. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies

4. Solaris

Can't boot from cdrom at ok prompt

I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6 I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
Discussion started by: Msororaji
11 Replies

5. Solaris

Boot from cdrom

i am having a problem when trying to boot from cdrom. I received the below message system is not bootable, boot command is disabledfound how can i fix this. also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Discussion started by: shabu
2 Replies

6. Solaris

not able to boot from cdrom

Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args: Can't read disk label Can't open disk label package can,t open boot device ... (17 Replies)
Discussion started by: kumarmani
17 Replies

7. Solaris

can't boot cdrom

iam traying to install o/s in spark machine it showing error ok >boot cdrom is showing error short disk read failed to read superblock the file just loaded does not appear to excutable how to solve this can u help me (6 Replies)
Discussion started by: tirupathi
6 Replies

8. Solaris

Boot cdrom - install

Hi community, Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ? Thank you very much:D (3 Replies)
Discussion started by: Sunb3
3 Replies

9. Hardware

Cannot boot from scsi cdrom

I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Discussion started by: powwm
1 Replies

10. UNIX for Beginners Questions & Answers

Cannot boot cdrom -s

Good Afternoon, I'm trying to boot from cdrom so I: bash-2.05# init 0 {1} ok boot cdrom -s and I get: Rebooting with command: boot cdrom -s Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s Can't read disk label. Can't open disk label package Evaluating: Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
socal(7D)							      Devices								 socal(7D)

NAME
socal - Serial Optical Controller for Fibre Channel Arbitrated Loop (SOC+) device driver SYNOPSIS
socal@sbus-slot,0 DESCRIPTION
The Fibre Channel Host Bus Adapter is an SBus card which implements two full duplex Fibre Channel interfaces. Each Fibre Channel interface can connect to a Fibre Channel Arbitrated Loop (FC-AL). The socal device driver is a nexus driver and implements portions of the FC-2 and FC-4 layers of FC-AL. FILES
/kernel/drv/socal ELF Kernel Module ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |SPARC | +-----------------------------+-----------------------------+ SEE ALSO
sbus(4), sf(7D), ssd(7D) Writing Device Drivers ANSI X3.230-1994, Fibre Channel Physical and Signalling Interface (FC-PH) ANSI X3.272-1996, Fibre Channel Arbitrated Loop (FC-AL) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) DIAGNOSTICS
The messages described below may appear on system console in addition to being logged. On the console, these messages are preceded by: socal%d: port %a where %d is the instance number of the socal controller and %a is the port on the host adapter. Fibre Channel Loop is ONLINE The Fibre Channel loop is now online. Fibre Channel Loop is OFFLINE The Fibre Channel loop is now offline. attach failed: device in slave-only slot. Move soc+ card to another slot. attach failed: bad soft state. Driver did not attach, devices will be inaccessible. attach failed: unable to alloc xport struct. Driver did not attach, devices will be inaccessible. attach failed: unable to map eeprom Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to map XRAM Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to map registers Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to access status register Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to install interrupt handler Driver was not able to add the interrupt routine to the kernel. Driver did not attach to device, devices will be inaccessible. attach failed: unable to access host adapter XRAM Driver was unable to access device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to write host adapter XRAM Driver was unable to write device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: read/write mismatch in XRAM Driver was unable to verify device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible. SunOS 5.11 9 May 1997 socal(7D)
All times are GMT -4. The time now is 06:48 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy