Depends on Solaris 10 release, I think that since release 5 is possible to configure swap values directly in zone configuration via
sub command in
If you have once configured values for shared memory, capped memory, amount of swap you can dynamically change values for running zone via
Hi,
When I execute one of my shellscript I am getting the below mentioned error message .This application takes 2input files which have the records counts 26463 and 1178046
exec(2): insufficient swap or memory available.
exec(2): insufficient swap or memory available.
exec(2):... (2 Replies)
Hi,
When I execute one of my shellscript I am getting the below mentioned error message .This application takes 2input files which have the records counts 26463 and 1178046
exec(2): insufficient swap or memory available.
exec(2): insufficient swap or memory available.
exec(2): insufficient swap... (3 Replies)
hi all,
yesterday, on one of the SunFire4800 system, there was a strange issue seen.
# df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 4.7G 554M 4.1G 12% /
/proc 0K 0K 0K 0% /proc
mnttab 0K ... (2 Replies)
One of our system is running 3 oracle db instances. And as per prstat o/p the system is approximately using 78G of swap memory
# prstat -J -n 2,15
PROJID NPROC SWAP RSS MEMORY TIME CPU PROJECT
4038 557 31G 29G 22% 113:23:43 10% proj1
4036 466 20G 19G... (2 Replies)
HI All,
Recently during oracle install I realized that I did not have enough swap space.
So I -
1. Created a swap file "swap_fille1" in /rpool using mkfile -
# ls -ltr /rpool
total 10487121
drwxr-xr-x 3 root root 3 Dec 21 12:09 boot
drwxr-xr-x 2 root root ... (10 Replies)
:wall:I'm having a bit of a problem with Solaris 10u8 and one of our applications requesting memory and being told, "no space left".
The break down:
24GB Physical Memory
8GB swap
at the time of occurance, here's what a memory breakdown looks like:
Page Summary Pages ... (21 Replies)
I am running HP9000 Containers version A.03.01. I have the container up and running. I now need to mount an exported file system from another HPUX server with both read and write permissions. I can get the mount okay but from the container I cannot read or write properly to the mounted file... (2 Replies)
Hi,
I am not sure how many scripts / java processes running on my HP-UX server.
I need to calculate the total heap of these processes.
I then need to recommend increasing the swap memory to be increase and equal to total heap if that is the right concept.
Currently we are facing... (2 Replies)
I have Solaris-10 with mutiple zones running in it. My Big Brother monitoring is complaining for very less swap space available, but I am not able to find, what process has consumed its swap space and how to clear it. All zones including global server have almost blank /tmp with very less data.... (3 Replies)
Hi,
In our production box i can see the Swap space using the below command
free
total used free shared buffers cached
Mem: 65963232 41041084 24922148 0 877160 35936292
-/+ buffers/cache: 4227632 61735600
Swap: 4192880 ... (6 Replies)
Discussion started by: ratheeshjulk
6 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)