Fail to up network interface after system boot Post: 302359596

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 9 install cd boot fail

Hi I hv try to install Solaris 9 on a SPARC machine. The machine now is with Solaris 10 OS. I try to load a Solaris 9 installation cd in and use "boot cdrom" on ok promt, but it give me "no boot device found" when it boot up. and when i use fsck, the system show me an error with the...

2. Solaris

Solaris 10 x86 1/06 CD1 boot fail

Hello all. I download last version from sun.com, unzip iso's and burn their to cd's. When i try to load (on different machines) from first cd i receive this errors: /kernel/fs/specfs: undefined symbol '' /kernel/fs/specfs: undefined symbol '' ... several screens same message .......

3. BSD

kernel fail to boot after recompile it

Salamo Alikom after recompilation my kernel does not boot and display msg said : enter full path to bash : /bin/sh i try fsck -r ,fsck -y but the problem is steel . my make.conf : PERL_VER=5.8.8 OVERRIDE_LINUX_BASE_PORT=f8 PERL_VERSION=5.8.8 MODULES_OVERRIDE = linux acpi accf_http pccard msdosfs...

4. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks

5. HP-UX

fail to boot HPUX

HPUX running in D-Class (L1000), pretty old HPUX version - hpux 11.00 Attempt 1 -- To boot from normal (primary) Unable to boot - system complains failure SYSTEM ALERT System Name : uninitialized DATE : 10/22/2011 Time : 03/41:12 Alert Level 15 = Fatal hardware or configuration...

6. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that.

7. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

8. UNIX for Dummies Questions & Answers

Adding a network interface to a bonded interface

I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without...

9. Red Hat

System fail to boot

Hi im using centos 6.4 starting yesterday i have a strange issue that im unable to resolve. the system is booting to GRUB menu and the os is not starting. i tried to run a repair install and the message attached is what i get, what can cause this? thanks,

10. Solaris

Serious problem to fail boot up

My current OS using the solaris 9 and find the reboot , it returns the message even i restore , and boot -s Hardware watchdog enabled Configuring ATM interfaces: NOTICE: VxVM not started configuring IPv4 interfaces: bge0 bge3 ce0 ce3. Hostname: devuardms01 mount: mount-point /usr does...

LEARN ABOUT CENTOS

runit-init

runit-init(8)                                                 System Manager's Manual                                                runit-init(8)

NAME

       init - a UNIX process no 1

SYNOPSIS

       init [ 0 | 6 ]

DESCRIPTION

       runit-init is the first process the kernel starts.  If runit-init is started as process no 1, it runs and replaces itself with runit(8).

       If runit-init is started while the system is up, it must be either called as init 0 or init 6:

       init 0 tells  the  Unix  process  no 1 to shutdown and halt the system.  To signal runit(8) the system halt request, runit-init removes all
              permissions of the file /etc/runit/reboot (chmod 0), and sets the execute by owner permission of the file  /etc/runit/stopit  (chmod
              100).  Then a CONT signal is sent to runit(8).

       init 6 tells  the  Unix  process no 1 to shutdown and reboot the system.  To signal runit(8) the system reboot request, runit-init sets the
              execute by owner permission of the files /etc/runit/reboot and /etc/runit/stopit  (chmod  100).  Then  a  CONT  signal  is  sent  to
              runit(8).

EXIT CODES

       runit-init returns 111 on error, 0 in all other cases.

SEE ALSO

       runit(8), runsvdir(8), runsvchdir(8), sv(8), runsv(8), chpst(8), utmpset(8), svlogd(8)

       http://smarden.org/runit/

AUTHOR

       Gerrit Pape <pape@smarden.org>

                                                                                                                                     runit-init(8)

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 9 install cd boot fail

Discussion started by: niuniu

2. Solaris

Solaris 10 x86 1/06 CD1 boot fail

Discussion started by: mozheyko_d

3. BSD

kernel fail to boot after recompile it

Discussion started by: SIFE

4. Solaris

configure zones to have different network interface and network

Discussion started by: skamal4u