09-29-2009
Quote:
Originally Posted by
System Shock
The problem with that is that Blades have IDE disks.. I don't know that I want to plug those when the chassis is powered on.
But, he could remove all disks, boot the Blade, get to the ok prompt, then like you said in your previous post set auto-boot to false, poweroff the Blade, replace the disks, and power the Blade back on.
afaik the blade 1500 has fcal disks... should be the same board as a 280r which has fcal disks!
edit:
no, you are right... it's ide:
http://sunsolve.sun.com/handbook_pub...lade1500S/spec
i thought about blade 1000/2000 which indeed have fcal disks...
10 More Discussions You Might Find Interesting
1. Solaris
Hello everybody,
I installed sun solaris i86 , the programme installation install the
"Mini Root" and after that he doing shutdown.
the camputer coming up and he can't boot.
how i can to resuled this problem ???
Thenk you in advence..... (2 Replies)
Discussion started by: yanly
2 Replies
2. Solaris
Hi,
I have Sun SPARC Enterprise T5140 and I can't access it via serial port using preconfigured administrator account, as described in Sun Integrated Lights Out Manager 2.0 User's Guide: I'm always receive "Login incorrect" message. I'm really confused! Does anyone experience such circumstances?... (12 Replies)
Discussion started by: Sapfeer
12 Replies
3. Solaris
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies
4. Solaris
Hi all.
I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'.
I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies
5. Solaris
Hi All,
I had install the solaris 10 into the SUNFIRE V890 server, after installed, it keep rebooting.
I wish to enter the OK mode again, and install back the Solaris 10.
i had try the "break" button and "stop+A" button, but all fail.
kindly advice... (4 Replies)
Discussion started by: SmartAntz
4 Replies
6. Hardware
hello
i have a sun server V890 and it stops booting after adding 2 CPUs modules and gives me the following error message:
Enabling system bus....... Done
Initializing CPUs......... Done
Initializing boot memory..
RAM-Copy CRC failure!Can't start: No image found
FATAL: Can't find/decompress... (0 Replies)
Discussion started by: bahjatm
0 Replies
7. Hardware
Hi all!
I have a Sun JavaStation-1 which doesn't boot: when I turn on the power switch, the power led becomes lit but the screen remains black (going in power save after about 5 seconds). :eek:
Now my question is: could be this problem due to a dead IDPROM? :confused:
I have this doubt because... (0 Replies)
Discussion started by: wisechip
0 Replies
8. Solaris
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
... (6 Replies)
Discussion started by: insatiable1610
6 Replies
9. UNIX for Beginners Questions & Answers
Hi all,
I've got a Sun ultra 30 workstation. the Nvram battery died so I replaced it. I reprogrammed the mac address using the mlpl command all that so it booted without error. But for some reason I was trying to boot via the network. So I did a STOP A and boot disk1 which is the alias for my SCSI... (2 Replies)
Discussion started by: robbo007
2 Replies
10. UNIX for Beginners Questions & Answers
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
]-> show HOST
/HOST
Targets:
bootmode
diag
domain
Properties:
autorestart = reset
autorunonerror = false
bootfailrecovery = poweroff
... (29 Replies)
Discussion started by: z_haseeb
29 Replies
LEARN ABOUT HPUX
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)