For disk errors, look for cxtxdx in the messages or the sd device equivalent..
Example, sd0 below, you can check against and compare the iostat -E and iostat -En command to find the correct disk.
Hi all,
i have run iostat -em, and get below result. Can i know what is this output meaning, and how to fix that problem.
iostat -em
---- errors ---
device s/w h/w trn tot
sd7 0 1 0 1
sd8 1 1 0 2
sd9 0 1 0 1
sd10 0 ... (2 Replies)
All,
I am attempting to help tune a Sun for better performance (mainly for SAS 9.1), and have found indicators pointing to poor I/O utilization. I have run iostat -cx, and found one device in particular where the %w is in the 90's during processing. I have a feeling that this is where the SAS... (3 Replies)
Hi All AIX expert
i'm using AIX 5.2
When i execute this command which is :
----------------------------------------------------------------------
>> iostat -a
System configuration: lcpu=4 disk=30
tty: tin tout avg-cpu: % user % sys % idle % iowait
... (2 Replies)
Friends.
I have to compare iostat -x output with a tool on solaris. Now there is column called wait in the output field which is showing zero. Now, in order to create some load on my system this is what i am doing
I am creating a file using dd command , the size of which is... (5 Replies)
A find for the "iostat" command on a redhat 5 update 4 comes back with no results.
Any separate rpm needs to be installed to get the binary for this ?
Thanks in advance. (1 Reply)
I all,
I would like to know what are the causes of :
-soft error
-harderror
-transport error
and how to avoid and repare them.
I got the iostat out put below:
atng-mm01% iostat -En | grep -i hard
c0t0d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
c0t0d1 ... (3 Replies)
Hi Unix experts,
I have a question regarding a disk failure seen in "iostat -Enm" output:
# iostat -Enm
c1t0d0 Soft Errors: 0 Hard Errors: 7 Transport Errors: 9
Vendor: FUJITSU Product: MAU3073NCSUN72G Revision: 0802 Serial No: 0514F005M0
Size: 73.40GB <73400057856 bytes>
Media... (5 Replies)
Hello everyone,
Can you please explain me what kind of information do IOSTAT show ?
iostat -xnz 3 show me those informations:
The I/O of the c0t0d0 disk is normal ?
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.0 ... (3 Replies)
Hello, I support Oracle 11g on AIX 7.1.
Using the command
$iostat -D hdisk2 hdisk4 hdisk5 5
I get the following output:
hdisk5 xfer: %tm_act bps tps bread bwrtn
44.0 1.4M 178.2 1.4M 14.7K
read: ... (3 Replies)
Discussion started by: oracledba1024
3 Replies
LEARN ABOUT NETBSD
iostat
IOSTAT(8) BSD System Manager's Manual IOSTAT(8)NAME
iostat -- report I/O statistics
SYNOPSIS
iostat [-CdDITx] [-c count] [-M core] [-N system] [-w wait] [drives]
DESCRIPTION
iostat displays kernel I/O statistics on terminal, disk and CPU operations. By default, iostat displays one line of statistics averaged over
the machine's run time. The use of -c presents successive lines averaged over the wait period. The -I option causes iostat to print raw,
unaveraged values.
Only the last disk option specified (-d, -D, or -x) is used.
The options are as follows:
-c count Repeat the display count times. Unless the -I flag is in effect, the first display is for the time since a reboot and each sub-
sequent report is for the time period since the last display. If no wait interval is specified, the default is 1 second.
-C Show CPU statistics. This is enabled by default unless the -d, -D, -T, or -x flags are used.
-d Show disk statistics. This is the default. Displays kilobytes per transfer, number of transfers, and megabytes transferred.
Use of this flag disables display of CPU and tty statistics.
-D Show alternative disk statistics. Displays kilobytes transferred, number of transfers, and time spent in transfers. Use of this
flag disables the default display.
-I Show the running total values, rather than an average.
-M core Extract values associated with the name list from the specified core instead of the default ``/dev/mem''.
-N system Extract the name list from the specified system instead of the default ``/netbsd''.
-T Show tty statistics. This is enabled by default unless the -C, -d, or -D flags are used.
-w wait Pause wait seconds between each display. If no repeat count is specified, the default is infinity.
-x Show extended disk statistics. Each disk is displayed on a line of its own with all available statistics. This option overrides
all other display options, and all disks are displayed unless specific disks are provided as arguments. Additionally, separate
read and write statistics are displayed.
iostat displays its information in the following format:
tty
tin characters read from terminals
tout characters written to terminals
disks
Disk operations. The header of the field is the disk name and unit number. If more than four disk drives are configured in the sys-
tem, iostat displays only the first four drives. To force iostat to display specific drives, their names may be supplied on the com-
mand line.
KB/t Kilobytes transferred per disk transfer
t/s transfers per second
MB/s Megabytes transferred per second
The alternative display format, (selected with -D), presents the following values.
KB Kilobytes transferred
xfr Disk transfers
time Seconds spent in disk activity
cpu
us % of CPU time in user mode
ni % of CPU time in user mode running niced processes
sy % of CPU time in system mode
id % of CPU time in idle mode
FILES
/netbsd Default kernel namelist.
/dev/mem Default memory file.
SEE ALSO fstat(1), netstat(1), nfsstat(1), ps(1), systat(1), vmstat(1), pstat(8)
The sections starting with ``Interpreting system activity'' in Installing and Operating 4.3BSD.
HISTORY
iostat appeared in Version 6 AT&T UNIX. The -x option was added in NetBSD 1.4.
BSD March 1, 2003 BSD