Sponsored Content
Full Discussion: Unqualified Host at boot
Top Forums UNIX for Dummies Questions & Answers Unqualified Host at boot Post 302342813 by ltillman on Tuesday 11th of August 2009 07:30:05 PM
Old 08-11-2009
Thanks... here is the info

Sorry for the time lapse... didn't connect the floppy... thank God for USB.
As you can see hostname was not found. Also, I can ping the name I entered for the router ip address and get "alive" but the ip address says it's "unreachable"

# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
#

# netstat -r

Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ------ ---------
localhost localhost UH 10 316 lo0
#

# pwd
/etc
# ls hosts*
hosts hosts2

---------- Post updated 08-11-09 at 07:30 PM ---------- Previous update was 08-10-09 at 10:20 PM ----------

I found that my interface didn't have the drivers installed so I replaced it with another that I had. Now I am pinging the router, my other pc (in a different floor) and everything on my network. I can even get into the router settings with my password from my Sol 10 box. One problem though, whenever I try to open my web browser, I get "connection refused". I've checked all passwords,security on the router, and tried proxie settings as well as direct connect... same result. I do not show my Solaris box in my client table on my router but the ping is successful. I have added the box's ip to the "allow" list... no luck. Any ideas where else to look?

Thank You

# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 493 0 493 0 0 0
elxl2 1500 me me 8027 109 6856 0 0 0

Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis
lo0 8252 localhost localhost 493 0 493 0 0
elxl2 1500 fe80::250:daff:fe06:a341/10 fe80::250:daff:fe06:a341 8027 109 6856 0 0
 

10 More Discussions You Might Find Interesting

1. IP Networking

QNX host cannot ping SCO host, vice versa

The problem I am facing now is that the QNX host could not ping the SCO host and vice versa. They are in the same domain, ie, 172.20.3.xx. As I am very new to Unix, I guess I must have missed out some important steps. Pls help... Thanx alot (2 Replies)
Discussion started by: gavon
2 Replies

2. UNIX for Dummies Questions & Answers

dmesg on a sun, unqualified host

Oct 22 01:01:47 sendmail: My unqualified host name unknown; sleeping for retry Oct 22 01:02:47 sendmail: unable to qualify my own domain name -- using short name how to resolve this error thanks (11 Replies)
Discussion started by: yls177
11 Replies

3. Solaris

sendmail and unqualified addresses

I have a solaris 10 server running sendmail 8.13.8, configuration file V10. On another server I am able to send local emails without appending a domain name but on this server I cannot. The mail does not bounce, the log file says they are sent, but they are not delivered. There isn't a problem... (10 Replies)
Discussion started by: csgonan
10 Replies

4. Solaris

Unqualified host name

Hi All I am Having V890 Server with Solaris 10 OS.In Dmesg showing the sendmail error. This is the error: Jul 26 22:04:56 ORACLE sendmail: My unqualified host name (ORACLE) unknown; sleeping for retry Jul 26 22:05:56 ORACLE sendmail: unable to qualify my own domain name (ORACLE) -- using... (5 Replies)
Discussion started by: ravigpb
5 Replies

5. Solaris

My unqualified host name

Hi experts . . . host name: prd47e Sunsolaris 9 version My mails are not going and am gettin regular messages like: * My unqualified host name (prd47e) unknown; sleeping for retry * unable to qualify my own domain name (prd47e) -- using short name my /etc/hosts file contnets are... (6 Replies)
Discussion started by: vrjalli
6 Replies

6. Shell Programming and Scripting

running commands to remote host from centralized host

Gurus/Experts We have a centralized UNIX/Solaris server from where we can actually ssh to all other UNIX/Solaris servers...I need to write a script that reside on this centerlized server and do FileSystem monitoring (basically run df -h or -k) of other remote servers and then send an email to me... (6 Replies)
Discussion started by: anjum.suri
6 Replies

7. UNIX for Advanced & Expert Users

Help! How to find the local host after few ssh hops to remote host???

I do a ssh to remote host(A1) from local host(L1). I then ssh to another remote(A2) from A1. When I do a who -m from A2, I see the "connected from" as "A1". => who -m userid pts/2 2010-03-27 08:47 (A1) I want to identify who is the local host who initiated the connection to... (3 Replies)
Discussion started by: gomes1333
3 Replies

8. UNIX for Dummies Questions & Answers

Transfer large number of files host to host

Hello.... I have two servers, one has an empty / and the other has a subdirectory with a large number (4 gig) with many, many files. I need a way to transfer the files en masse from the server with the large number of files to the one that is essentially blank. I don't have space on the used... (16 Replies)
Discussion started by: blaine.miller
16 Replies

9. Solaris

Classic: sendmail[pid]: My unqualified host name (hostname) unknown

Hi all, I'd like to disable sendmail permanently on my "new" 220R with freshly installed SunOS 5.10 because it prints annoying messages to the system console. Also I'm interested in how to fix the actual problem with unqualified host name. My unqualified host name (hostname) unknown; sleeping... (2 Replies)
Discussion started by: pseudocoder
2 Replies

10. Solaris

Need to recover/move diskgroup from failed host to another host

Hi All I am having VxVm on two Solaris hosts. host1 is using disk group dgHR. right now this server went down due to hardware fault. Not I need to import this dgHR into host2 server. Please let me know the procedure for the same. (1 Reply)
Discussion started by: amity
1 Replies
ibtl(7D)							      Devices								  ibtl(7D)

NAME
ibtl - Solaris InfiniBand Transport Layer DESCRIPTION
InfiniBand (IB) is an I/O technology based on switched fabrics. The Solaris InfiniBand Transport Layer (IBTL) is a Solaris kernel misc mod- ule and adheres to the IB Architecture Version 1.1 specification and provides a transport layer abstraction to IB client drivers. IBTL implements the programming interfaces for the Solaris InfiniBand Transport Framework (IBTF), consisting of the IB Channel Interface (CI) and the IB Transport Interface (TI). The CI consists of Host Channel Adapters (HCAs) and HCA drivers. A host is attached to the IB fabric through the CI layer. The Solaris InfiniBand CI is Sun's API rendering of the InfiniBand Architecture (IBTA) "verbs" specification. The Solaris InfiniBand TI is the kernel service driver interface into the Solaris InfiniBand Transport Framework. It provides transport and communications setup programming interfaces for Unreliable Datagram (UD) and Reliable Connected (RC) transport types only. FILES
/kernel/misc/ibtl 32-bit x86 ELF kernel misc module /kernel/misc/amd64/ibtl 64-bit x86 ELF kernel misc module /kernel/misc/sparcv9/ibtl 64-bit SPARC ELF kernel module ATTRIBUTES
See attributes(5) for a description of the following attribute: +-----------------------------+-----------------------------+ |ATTRIBUTE TYPE |ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Consolidation Private | +-----------------------------+-----------------------------+ |Availability |SUNWhea, SUNWib | +-----------------------------+-----------------------------+ SEE ALSO
attributes(5), ib(7D), ibcm(7D), ibdm(7D) InfiniBand Architecture Specification, Volume 1: Release 1.1 SunOS 5.10 9 Oct 2004 ibtl(7D)
All times are GMT -4. The time now is 08:54 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy