T2000 RAID Question Post: 302334344

10 More Discussions You Might Find Interesting

1. AIX

RS6000 SSA Raid question

Hi Can I add disks on the fly to extend the capacity of an existing RAID 5 volume? It's created on a 4P Advanced SSA Raid Adapter. I need to extend a volume group, so I figured it would be easiest to extend the "physical disk" which is a RAID5 volume. Thanks.

2. Solaris

X4100 Bios RAID question

Hi there the Sunfire X4100 has a great tool that you can get to from BIOS called the configuration utility which allows you to set up Disk mirroring (RAID 1) before the OS sees it, which is great and it works a treat, however, we have a large datacentre across multiuple sites and I need to find...

3. Solaris

How to setup hardware RAID on a T2000

Hello all We've just bought a T2000. It has two disks and I'm trying to figure out how to create a mirror of the boot disk. I understand that I have to boot into single user mode from DVD and then use the raidctl command to set up the mirror and label the volume afterwards. Format returns...

4. Solaris

T2000 Hardware RAID

Hi, I have a root with hardware RAID on c0t0d0 and c0t2d0. I would like to set the boot device sequence in OBP for both hdds. I have checked in ls -l /dev/rdsk/ for the path of c0t2d0 but it does not exist. Can anyone shed some lights on this? AVAILABLE DISK SELECTIONS: 0....

5. SuSE

openSuse 11.1 RAID 0 Question

Hello, I have a file server running openSuse 11.1, that has two HDDs running in RAID 0 (mirroring) using the md software RAID linux driver. I was considering removing this RAID, using one of the drives as the OS and the other as a data drive. Is there any way to stop using this as a RAID set to do...

6. Solaris

Raid problem on T2000

Hi all, First post so be gentile :) It's my first time installing Solaris on T2000 server. I have 2 72GB HD's on it. After configuring HW raid and running raidctl command I get this output: bash-3.00# raidctl -l c0t0d0 Volume Size Stripe Status Cache RAID ...

7. Solaris

Sun T2000 question

This may be a stupid question, but I don't want to take any chances. I have a Sun T2000 in production. I want to run the "resetsc" command on the ALOM controller to active an IP address change. Will resetting ALOM affect the running OS? Thanks

8. Hardware

Hardware RAID on Sun T2000 Server

Hi All I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command. Following is the hardware RAID output. root@oracledatabaseserver / $ raidctl RAID Volume RAID RAID Disk...

9. UNIX for Dummies Questions & Answers

RAID on Solaris Question

Hello folks; I'm trying to install Solaris 10 x86 on SUN X4150 box with 6 disks in it, the question is how can i create a Virtual disk like RAID 0 before i install Solaris. When i boot up i don't see any option to go and create my raid before the installation begin. Thanks in advance for any...

10. Solaris

Sun V240 Raid Question

Hi All, I'm new to this site. I have a few question since I'm in the process how to to repair my raid on Sun V240 Server. 1. How can we create RAID in Sun Sparc v240? 2. What utility can help people create RAID in Sun Sparc v240? 3. Do we need any special software to create the...

LEARN ABOUT SUNOS

lsimega

lsimega(7D)															       lsimega(7D)

NAME

       lsimega - SCSI HBA driver for LSI MegaRAID 320-2x SCSI  RAID Controller

       The lsimega SCSI RAID  host bus adapter driver is a SCSA-compliant nexus driver that supports LSI MegaRAID 320-2x SCSI RAID devices.

       The  lsimega  driver supports  standard	functions provided by the SCSA interface, including RAID disk I/O  and	passthrough I/O to support
       SCSI tape and CDROM.

DRIVER CONFIGURATION

       The lsimega.conf file contains no user configurable parameters. Please configure your hardware through BIOS.

       The LSI MegaRAID 320-2x device can support up to 40 logic drivers. Note that BIOS numbers the logic drives as  1  through  40,  however	in
       Solaris these drives are numbered from 0 to 39.

       See attributes(5) for a description of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |				   |
       +-----------------------------+-----------------------------+

FILES

       /kernel/drv/lsimega

	   32-bit ELF kernel module.

       /kernel/drv/amd64/lsimega

	   64-bit kernel module ( only).

       /kernel/drv/lsimega.conf

	   Driver configuration file (contains no user-configurable options).

       prtconf(1M),   attributes(5),  amr(7D),	scsi_hba_attach(9F),  scsi_sync_pkt(9F),  scsi_transport(9F),  scsi_inquiry(9S),  scsi_device(9S),
       scsi_pkt(9S)

       Small Computer System Interface-2 (SCSI-2)

								   20 April 2005						       lsimega(7D)