Linux and UNIX Man Pages

Test Your Knowledge in Computers #315
Difficulty: Easy
To bypass US Munitions Export Laws, the creator of the PGP published all the source code in a binary format.
True or False?
Linux & Unix Commands - Search Man Pages

lsimega(7d) [sunos man page]

lsimega(7D)															       lsimega(7D)

NAME
lsimega - SCSI HBA driver for LSI MegaRAID 320-2x SCSI RAID Controller The lsimega SCSI RAID host bus adapter driver is a SCSA-compliant nexus driver that supports LSI MegaRAID 320-2x SCSI RAID devices. The lsimega driver supports standard functions provided by the SCSA interface, including RAID disk I/O and passthrough I/O to support SCSI tape and CDROM. DRIVER CONFIGURATION
The lsimega.conf file contains no user configurable parameters. Please configure your hardware through BIOS. The LSI MegaRAID 320-2x device can support up to 40 logic drivers. Note that BIOS numbers the logic drives as 1 through 40, however in Solaris these drives are numbered from 0 to 39. See attributes(5) for a description of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability | | +-----------------------------+-----------------------------+ FILES
/kernel/drv/lsimega 32-bit ELF kernel module. /kernel/drv/amd64/lsimega 64-bit kernel module ( only). /kernel/drv/lsimega.conf Driver configuration file (contains no user-configurable options). prtconf(1M), attributes(5), amr(7D), scsi_hba_attach(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S), scsi_pkt(9S) Small Computer System Interface-2 (SCSI-2) 20 April 2005 lsimega(7D)

Check Out this Related Man Page

amr(7D) 																   amr(7D)

NAME
amr - SCSI HBA driver for Dell PERC 3/DC, 4/SC, 4/DC and 4/DI The amr plain SCSI host bus adapter driver is a SCSA-compliant nexus driver that supports the Dell PERC 3DC/4SC/4DC/4Di RAID devices. The amr driver ports from FreeBSD and only supports basic RAID disk I/O functions. DRIVER CONFIGURATION
There are no user configurable parameters available. Please configure your hardware through BIOS. See attributes(5) for a description of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability | | +-----------------------------+-----------------------------+ FILES
/kernel/drv/amr 32-bit ELF kernel module. /kernel/drv/amd64/amr 64-bit kernel module ( only). /kernel/drv/amr.conf Driver configuration file (contains no user-configurable options). prtconf(1M), attributes(5), lsimega(7D), scsi_hba_attach(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S), scsi_pkt(9S) Small Computer System Interface-2 (SCSI-2) 20 April 2005 amr(7D)

15 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

CD Writers

Anyone know abt SCSI (Single-Ended) CD-RW drives (prefered External) .. which are compatible with Sun Solaris 8 .. :) DP (5 Replies)
Discussion started by: DPAI
5 Replies

2. SCO

Sco.5.0.5 Installation

Hi Am kind of new in Unix. I am used to installing SCO Unix 5.0.5 (very old i guess) on a server with SCSI RAID 0. at the boot prompt during installation I type restart link=ipsraid Srom=wd(0,0,0,0). But the problem now is that i want to install on a server with no RAID SCSI disk. what command do... (3 Replies)
Discussion started by: okonkwouz
3 Replies

3. HP-UX

RAID 0 on Unix

I was wanting to know if anyone knew how to setup RAID 0 on an old HP Unix server. It's for where I work and my boss has two hard drives and wants the second to take over if the first one fails hence RAID 0. If anyone could help me it would be greatly appreciated. (5 Replies)
Discussion started by: zmachine04
5 Replies

4. Filesystems, Disks and Memory

Raid 1+0 ?

My cutomer wants to set up a OS/apps server with two 72GB drives configured with RAID 1+0. The way I understand RAID 1+0 is that if there was a drive failure the whole OS/apps is lost because you actually need at least 4 drives to set up a RAID 1+0 by splitting them up into two arrays. Am I... (4 Replies)
Discussion started by: bdsffl
4 Replies

5. Solaris

how to hardware RAID 1 on T5120

Hi, I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1" The System did come preinstalled as it comes from sun. I did not do much on it. I booted system using boot cdrom -s gave format... (6 Replies)
Discussion started by: upengan78
6 Replies

6. Solaris

T2000 RAID Question

New to the boards here so please bear with me! I have a T2000 server with Solaris 10 installed on it. Disk 0 is the only disk currently being used, as I do NOT have a RAID set up. Disk 1 is just sitting there looking pretty. I'd like to set up a mirrored RAID in order to fully utilize both... (5 Replies)
Discussion started by: phi148
5 Replies

7. AIX

CDROM Issue on LPAR HMC VIO

Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR. How can I do it without rebooting the LPARS. POWER6 with HMC LPARS = AIX 6.1 Any info developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ... But... (5 Replies)
Discussion started by: filosophizer
5 Replies

8. SCO

SCO Unix "Mylex DA960"

Does anyone have the drivers for this RAID Controller specifically running on SCO?? (6 Replies)
Discussion started by: jedimaster
6 Replies

9. Filesystems, Disks and Memory

Software RAID

Hello, My company has inherited a Centos based machine that has 7 hard drives and a software based raid system. Supposedly one of the drives has failed. I need to replace the hardrive. How can I about telling which hard drive needs replacing? I have looked in the logs and there clearly is a... (5 Replies)
Discussion started by: mojoman
5 Replies

10. Solaris

Need ideas what is wrong with v440

Hello everyone, I'm here today looking for help... I have a SunFire v440 running Solaris 9 at work that manages the SCSI tape drives(LTO3) in our L700 tape library (runs SAMFS). I went into work today and found the machine was ping-able but I could not connect to it via SSH and could not... (7 Replies)
Discussion started by: mainegeek
7 Replies

11. Solaris

Setting up bootblock on RAID 0 SVM

Hi All! I'm running Solaris 10 and SPARC and using Let me give a bit of background before asking my question: I have created a RAID 0 (stripe) on 2 disks, I have the OS running on a third disk and I have now performed a ufsdump / ufsrestore from my third disk to the RAID 0 disks... (7 Replies)
Discussion started by: Keepcase
7 Replies

12. Solaris

Solaris not recognizing RAID 5 disks

I've just installed Sol 10 Update 9 on a Sun 4140 server and have a RAID 1 configuration (2 136 Gb drives) for the OS and have created a RAID 5 array (6 136 GB) drives. When i log into the system I am unable to see the RAID 5 disks at all. I've tried using the devfsadm command but no luck and... (9 Replies)
Discussion started by: goose25
9 Replies

13. Hardware

Raid 0 on database server

Hi guys. if we want to use SSD drives on a database server, can we use RAID 0 configuration because of their reliability? (3 Replies)
Discussion started by: majid.merkava
3 Replies

14. Shell Programming and Scripting

Source data validation

I am using below logic to validate whether i am expecting the correct data from source,if not logic should give which column has error.i am running below logic in linux awk -F, ' NR==1{next} {f=" "} $1!~/^{0,5}$|^$/{f=f?f" emp_id-error":"emp_id-error"} $4!~/^{0,6}$|^$/{f=f?f"... (4 Replies)
Discussion started by: katakamvivek
4 Replies

15. SCO

Error F painit on bootup

I have a known good external SCSI HD running SCO UNIX OpenServer 5.0.7. I decided that I wanted to be able to run this drive on another computer, so I bought the same SCSI card as before (LSI) and then attempted to boot on the other system. The bootup process hung with the error F painit. I've... (13 Replies)
Discussion started by: Transpower
13 Replies

Featured Tech Videos