07-06-2009
Right -- you could be having routing issues, not resolver issues. First, check your route table (route -n or netstat -rn) and see that your default gateway is only 1 hop away (it can be more, but then you need a route to it).
Check also /etc/resolv.conf and make sure it matches that of a properly-running machine.
On a properly-running machine, try "dig -x IPADDRESS" for both machines (the client and the improperlyconfigured server). You should get named addresses for both. If not, you need to fix the dns server. If so, try the same on the server to make sure it sees the same info.
10 More Discussions You Might Find Interesting
1. Linux
Hi,
I have a Linux 8.0 Redhat installed as a server. The samba configuration was done to allowed logging in to the server from windows workstations. I have a LAN, WAN connection. However, any time the workstation is trying to make a WAN connection it slow down all the systems on the network.
Can... (0 Replies)
Discussion started by: kayode
0 Replies
2. SCO
I have attempted to2find answers to this question:
When logging into tty01 the system will take 5 to 10 seconds to display each character typed. Each other terminal will login correctly and display correctly2but not the first terminal. Rebooting was suggested on several sites and this has been... (2 Replies)
Discussion started by: ypanic
2 Replies
3. HP-UX
We recently moved from a Open VMS OS to HP-UX. When printing labels on Intermec 3400 printers we are seeing a delay of up to 3 minutes before labels print. We have printers going through a DEC Term servers and Jet Direct boxes. Any suggestions what might be causing this delay? (4 Replies)
Discussion started by: BIGJIM
4 Replies
4. Solaris
Hello World ~
HW : SUN Fire V240
OS : Solaris 8
Error message prompts 'rmclomv ... SC login failure ...' on terminal.
and
Error Message prompts continually 'SC Login Failure for user Please login:' on Single Mode(init S)
The System is in normal operation, though
In case of rain, Can... (1 Reply)
Discussion started by: lifegeek
1 Replies
5. Solaris
Hi,
We have got 2 solaris boxes, since our inhouse application has certified on solaris environment and now we need to certify the performance of that application on Solaris environment.
1 box we have installed websphere and the other box we have installed Oracle 10.2.0.3. both are 64bit.
... (5 Replies)
Discussion started by: mp_rocket
5 Replies
6. Solaris
Hi
I have a Solaris 10 NIS server and more than 250 NIS clients out of these there are 5 main application servers, and whenever there is any compilation happens on any of the application servers (which are acting as NIS clients) entire NIS performance will come down.Can some one help me to fix... (5 Replies)
Discussion started by: nithnara
5 Replies
7. Solaris
Hi admins,
After changing the ip address(temperorily) ssh to that server is very slow(exactly 25 sec).But from this new ip i can ssh to other servers without any delay problem.
debug1: match: Sun_SSH_1.1.1 pat Sun_SSH_1.1.1*
debug1: Enabling compatibility mode for protocol 2.0
debug1:... (2 Replies)
Discussion started by: newsol
2 Replies
8. Solaris
Hi!
I have a m3000 server with solaris 10. Clients connecting to server using Xmanager. But when they open a Java based application its very slow and some times hanging. But when I tried with VNC it works fine. Is this a BUG in Xmanager? Or Is there any method to solve this?
Thanks,
Charith (3 Replies)
Discussion started by: charith.upendra
3 Replies
9. Solaris
Need assitance in troubleshooting steps . Below is the issue
I have LDOM which has 4 zones on it . One zone logging into the server takes 13sec where as other zones are quick .
Troubleshooting steps which I did
- Checked /var/tmp . Not many files
- We have LDAP but thought that wouldnt be... (7 Replies)
Discussion started by: ajayram_arya
7 Replies
10. AIX
Oracle database is facing slowness issues frequently on AIX server. So can anybody suggest how to fix these issues from OS end? Do we need to tune any parameter in AIX to resolve this issue?
Please post in an adequate forum! (1 Reply)
Discussion started by: vithal
1 Replies
LEARN ABOUT MINIX
make_sockdfr
MAKE_SOCKDFR(8) System Manager's Manual MAKE_SOCKDFR(8)
NAME
make_sockdfr - Generates frozen route file for SOCKS server
SYNOPSIS
make_sockdfr [infile [outfile] ]
DESCRIPTION
make_sockdfr reads in a plain-text route file for the SOCKS server and produces a frozen route file as the output.
Both arguments are optional. The default for infile is /etc/sockd.route; the default for outfile is /etc/sockd.fr. You may specify infile
while omitting outfile, but you cannot specify outfile without also speficying infile.
The contents of the frozen route file is essentially the memory image of the parsed input file. Using the frozen route file can reduce the
start-up delay of the SOCKS server program since it no longer has to parse the file contents.
When the SOCKS server starts, it always looks for the frozen route file /etc/sockd.fr first. If that file is not found, it then tries to
use the plain-text route file /etc/sockd.route. If you use frozen route file, you must remember to run make_sockdfr every time after you
modify the plain-text file or the SOCKS server will continue to use the frozen version of a previous route file.
To find out the contents of a frozen route file, use dump_sockdfr.
FILES
/etc/sockd.fr, /etc/sockd.route
SEE ALSO
dump_sockdfr(8), sockd.fr(5), sockd.route(5)
AUTHOR
Ying-Da Lee, yingda@esd.sgi.com or yingda@best.com
May 6, 1996 MAKE_SOCKDFR(8)