configure tape drive to sun solaris 10 Post: 302326020

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

How to configure tape drive on SUN

I am trying to configure DAT Tape drive on SUN E220 system but I don't have SUN keyboard. I am using a tty terminal k/b. What are my alternavtives? Is there any way to send interupts to the system on OK prompt using tty kb for probe SCSI. Thanks in advance.

2. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get...

3. Filesystems, Disks and Memory

help installing Sun 8mm unipack scsi tape drive

Hi all, please help I am stuck. I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the...

4. UNIX for Dummies Questions & Answers

DDS-2 Sun tape drive

Hey guys, I'm trying to mount a SUN DDS-2 tape drive on a SUN Ultra 80 machine running Solaris 9. I had the SCSI drive connected at time of install, I'm very new to Solaris so I don't know if Solaris would detect the drive like that and install some form of device driver. But, what im posting...

5. Solaris

how to install tape drive on sun ver 5.9

hi, need your help mentors I have external SCSI tape DRIVE COmpaq 15/30 GB DLT and I dont know how to install these and how to view if it is working. I'm also have another disk taken form my old sun and I want to use these also but my problem how I able to mount. hope anyone can help me ...

6. AIX

How to mount internal tape drive of sun machine in AIX 5.3

Hi, Help required! How to mount internal tape drive of sun machine in AIX 5.3

7. Solaris

Configure New LTO-2 Tape Drive

Can I do this live? Or, do I need to do a probe-scsi-all after doing a stop/A?

8. AIX

SUN StorageTek tape drive with AIX 5.1

Hi, I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server. The server can detect the tape device. Can someone please advice urgently. Thanks

9. Solaris

Sun E220R + HP (SCSI) LTO Ultrium Tape Drive

Hi all, this time I'd need a help from an advanced Solaris system admin :rolleyes: I attached a HP StorageWorks Ultrium 215 Tape Drives - Overview - c00059530 - HP Business Support Center to my Sun E220R and it got recognized immediately (probe-scsi-all). Now the operating system boot process...

10. Solaris

Install ext DLT Sun Tape drive on V445 Solaris 10

I have a SunFire V445 running Solaris 10 and am adding a Sun DLT tape drive. From the OK prompt the probe-scsi-all does see the drive and it is the proper target of 4. When I do the boot -- -r it does build the /dev/rmt directories correctly and the links to /devices appear correct as well. When I...

LEARN ABOUT NETBSD

esiop

ESIOP(4)						   BSD Kernel Interfaces Manual 						  ESIOP(4)

NAME

     esiop -- Enhanced Symbios Logic/NCR 53c8xx SCSI driver

SYNOPSIS

     esiop* at pci? dev ? function ?
     options SIOP_SYMLED
     scsibus* at esiop?

DESCRIPTION

     The esiop driver provides improved support over siop(4) for the Symbios Logic/NCR 53x8xx series of SCSI controller chips:

	   -   53c825 and 53c825a (Fast-Wide SCSI)
	   -   53c875 and 53c875j (Ultra-Wide SCSI)
	   -   53c876 (Dual Ultra-Wide SCSI)
	   -   53c885 (Ultra-Wide SCSI and Ethernet)
	   -   53c895 (Ultra2-Wide SCSI)
	   -   53c896 (PCI 64bit, dual Ultra2-Wide SCSI)
	   -   53c1010-33 (PCI 64bit, dual Ultra160 SCSI)
	   -   53c1510d (PCI 64bit, dual Ultra2-wide SCSI)
     Older adapters are supported by the siop(4) driver.

     The SIOP_SYMLED option causes the driver to report SCSI activity on the GPIO pin 1, which is connected to the activity LED on some adapters.
     At this time only the 53c895 based Symbios and Tekram adapters are known to require this.

SEE ALSO

     cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), siop(4), st(4), uk(4)

HISTORY

     The esiop driver first appeared in NetBSD 1.6.

AUTHORS

     The esiop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for NetBSD.

BSD
								  April 23, 2002							       BSD

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

How to configure tape drive on SUN

Discussion started by: s_aamir

2. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

Discussion started by: brv

3. Filesystems, Disks and Memory

help installing Sun 8mm unipack scsi tape drive

Discussion started by: dennis

4. UNIX for Dummies Questions & Answers

DDS-2 Sun tape drive

Discussion started by: kingdbag