05-27-2009
all guidance you'll need, should be found at docs.sun.com or you can also start at sunsolve.sun.com for more infos about your hardware.
10 More Discussions You Might Find Interesting
1. Solaris
Hi all
A couple of new M5000 servers will be arriving soon and I need to work out how to configure the underlying domains.
It will come with 4 x CPUS, 32 Gb of memory, 4 x HD, 2 x IOtrays.
Reading the XSCF manual, I can configure the item into 2 domains, something about uni / quad xsb.... (9 Replies)
Discussion started by: sbk1972
9 Replies
2. Solaris
Hi i 've a M5000 running 2 domains in my Lab with following hardconf
SPARC Enterprise M5000; Memory_Size:128 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_B... (3 Replies)
Discussion started by: fugitive
3 Replies
3. Solaris
Please advise. Thank you
bash-3.00# cd /usr/sunvts/bin/
bash-3.00# ls
bios.bin iobushangscript.sh stopsunvts vtsprobe
cmos.bin javabridge.jar sunlink vtsreportgenerate
dispatcher loadVtsServer svmVolDiskList vtstalk
env6test... (6 Replies)
Discussion started by: incredible
6 Replies
4. Hardware
I have an M5K with disk issues I'm trying to troubleshoot, and it's causing me some confusion. I know the host has four on-board HDDs, but the format command's output shows c0t0d0, c0t1d0, c3t0d0, and c3t1d0. cfgadm -al shows c0t3d0 as the DVD-ROM drive, and c1 and c2 as SAN disks. Confused yet?
... (2 Replies)
Discussion started by: desertdenizen
2 Replies
5. Solaris
Hi
We have an M5000 with one domain running Sun Cluster on it. We would like to split the domain into two domains. One with the existing Sun Cluster and one with a fresh install. We have 2 CPU Boards (8 CPU) / 4 Mem Boards (64 gb memory) and 2 IOU as well as 4 disks
Is it possible to have... (9 Replies)
Discussion started by: sanc
9 Replies
6. Solaris
Trying to update my M5000 firmware. trying to mount my USB to upload firmware and getting the following message.
XSCF> getflashimage -v file:///media/usb_msd/FFXCP1115.tar.gz
Free space: 97MB
Making sure mount point is clear
umount: /media/usb_msd is not mounted (according to mtab)
Trying... (2 Replies)
Discussion started by: soupbone38
2 Replies
7. Solaris
Hi Forum
please help me to fix M5000 Server which we were not using. now i logged to serve and foung that everything is showing as Deconfigured.
XSCF> showhardconf
SPARC Enterprise M5000;
+ Serial:BDF1051F30; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single;... (4 Replies)
Discussion started by: bentech4u
4 Replies
8. IP Networking
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
9. Solaris
I have an m5000 that Is down.
I have access to XSCF>
and was able to get to the ok prompt.
However, on
>ok boot
it failed to boot.
erred with :
svc.startd: svc:/system/device/fc-fabric:default: Method "/lib/svc/method/fc-fabric" failed due to signal KILL.
Nov 29... (3 Replies)
Discussion started by: goya
3 Replies
10. Hardware
on an m5000 , I can not power it up, system failure.
XSCF> poweron -a
DomainIDs to power on:00,01
Continue? :y
00 :Not powering on :Poweron canceled due to missing component.
01 :Not powering on :Poweron canceled due to missing component.
the only fault that I can see is:
... (4 Replies)
Discussion started by: goya
4 Replies
LEARN ABOUT OPENSOLARIS
mlib_signaliir_biquad_s16_s16_sat
mlib_SignalIIR_Biquad_S16_S16_Sat(3MLIB) mediaLib Library Functions mlib_SignalIIR_Biquad_S16_S16_Sat(3MLIB)
NAME
mlib_SignalIIR_Biquad_S16_S16_Sat, mlib_SignalIIR_Biquad_S16S_S16S_Sat, mlib_SignalIIR_Biquad_F32_F32, mlib_SignalIIR_Biquad_F32S_F32S -
biquad Infinite Impulse Response (IIR) filtering
SYNOPSIS
cc [ flag... ] file... -lmlib [ library... ]
#include <mlib.h>
mlib_status mlib_SignalIIR_Biquad_S16_S16_Sat(mlib_s16 *dst,
const mlib_s16 *src, void *filter, mlib_s32 n);
mlib_status mlib_SignalIIR_Biquad_S16S_S16S_Sat(mlib_s16 *dst,
const mlib_s16 *src, void *filter, mlib_s32 n);
mlib_status mlib_SignalIIR_Biquad_F32_F32(mlib_f32 *dst,
const mlib_f32 *src, void *filter, mlib_s32 n);
mlib_status mlib_SignalIIR_Biquad_F32S_F32S(mlib_f32 *dst,
const mlib_f32 *src, void *filter, mlib_s32 n);
DESCRIPTION
Each of these functions applies a biquad IIR filter to a signal array.
Printed copy or docs.sun.com displays an equation that represents the biquad IIR filtering.
The biquad IIR filter is represented by the following figure:
Printed copy or docs.sun.com displays a figure that represents the biquad IIR filter.
PARAMETERS
Each of the functions takes the following arguments:
dst Destination signal array.
src Source signal array.
filter Internal filter structure.
n Number of samples in the source signal array.
RETURN VALUES
Each of the functions returns MLIB_SUCCESS if successful. Otherwise it returns MLIB_FAILURE.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Committed |
+-----------------------------+-----------------------------+
|MT-Level |MT-Safe |
+-----------------------------+-----------------------------+
SEE ALSO
mlib_SignalIIR_P4_S16_S16_Sat(3MLIB), mlib_SignalIIRFree_Biquad_S16_S16(3MLIB), mlib_SignalIIRFree_P4_S16_S16(3MLIB), mlib_SignalI-
IRInit_Biquad_S16_S16(3MLIB), mlib_SignalIIRInit_P4_S16_S16(3MLIB), attributes(5)
SunOS 5.11 2 Mar 2007 mlib_SignalIIR_Biquad_S16_S16_Sat(3MLIB)