M5000 Question Post: 302320141

10 More Discussions You Might Find Interesting

1. Solaris

M5000 servers - XSCF functions

Hi all A couple of new M5000 servers will be arriving soon and I need to work out how to configure the underlying domains. It will come with 4 x CPUS, 32 Gb of memory, 4 x HD, 2 x IOtrays. Reading the XSCF manual, I can configure the item into 2 domains, something about uni / quad xsb....

2. Solaris

M5000 Question

Hi i 've a M5000 running 2 domains in my Lab with following hardconf SPARC Enterprise M5000; Memory_Size:128 GB; +-----------------------------------+------------+ | FRU | Quantity | +-----------------------------------+------------+ | MBU_B...

3. Solaris

Unable to start SunVTS on M5000

Please advise. Thank you bash-3.00# cd /usr/sunvts/bin/ bash-3.00# ls bios.bin iobushangscript.sh stopsunvts vtsprobe cmos.bin javabridge.jar sunlink vtsreportgenerate dispatcher loadVtsServer svmVolDiskList vtstalk env6test...

4. Hardware

Sun/Oracle M5000 Question

I have an M5K with disk issues I'm trying to troubleshoot, and it's causing me some confusion. I know the host has four on-board HDDs, but the format command's output shows c0t0d0, c0t1d0, c3t0d0, and c3t1d0. cfgadm -al shows c0t3d0 as the DVD-ROM drive, and c1 and c2 as SAN disks. Confused yet? ...

5. Solaris

M5000 splitting existing domain

Hi We have an M5000 with one domain running Sun Cluster on it. We would like to split the domain into two domains. One with the existing Sun Cluster and one with a fresh install. We have 2 CPU Boards (8 CPU) / 4 Mem Boards (64 gb memory) and 2 IOU as well as 4 disks Is it possible to have...

6. Solaris

Mounting USB in XSCF on M5000

Trying to update my M5000 firmware. trying to mount my USB to upload firmware and getting the following message. XSCF> getflashimage -v file:///media/usb_msd/FFXCP1115.tar.gz Free space: 97MB Making sure mount point is clear umount: /media/usb_msd is not mounted (according to mtab) Trying...

7. Solaris

M5000 showhardconf is showing everything is Deconfigured

Hi Forum please help me to fix M5000 Server which we were not using. now i logged to serve and foung that everything is showing as Deconfigured. XSCF> showhardconf SPARC Enterprise M5000; + Serial:BDF1051F30; Operator_Panel_Switch:Locked; + Power_Supply_System:Single;...

8. IP Networking

M5000 Xscf

I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip. it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out. so my question is, any ideas of what I might...

9. Solaris

M5000 fails to boot

I have an m5000 that Is down. I have access to XSCF> and was able to get to the ok prompt. However, on >ok boot it failed to boot. erred with : svc.startd: svc:/system/device/fc-fabric:default: Method "/lib/svc/method/fc-fabric" failed due to signal KILL. Nov 29...

10. Hardware

M5000 won't power up

on an m5000 , I can not power it up, system failure. XSCF> poweron -a DomainIDs to power on:00,01 Continue? :y 00 :Not powering on :Poweron canceled due to missing component. 01 :Not powering on :Poweron canceled due to missing component. the only fault that I can see is: ...

LEARN ABOUT PLAN9

asadmin-start-appserv

asadmin-start-appserv(1AS)					   User Commands					asadmin-start-appserv(1AS)

NAME

       asadmin-start-appserv, start-appserv - starts thedomains in the specified or default domains directory

SYNOPSIS

       start-appserv [--domaindir install_dir/domains] [--terse=false] [--echo=false]

DESCRIPTION

       This command has been deprecated. Please use start-domain to start the domains in the specified or default domains directory. start-appserv
       starts the domains in the specified or default domains direcotry. If the domains directory is not specified, the  domains  in  the  default
       domains directory are started. The default domains directory is install_dir/domains. This command can only be run locally.

OPTIONS

       --domaindir	       directory where the domains are started. If specified, path must be accessible in the filesystem. If not specified,
			       the domains are started in the default install_dir/domains directory.

       --terse		       indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
			       formatted data for consumption by a script. Default is false.

       --echo		       setting to true will echo the command line statement on the standard output. Default is false.

EXIT STATUS

       0		       command executed successfully

       1		       error in executing the command

       asadmin-create-domain(1AS), asadmin-start-domain(1AS), asadmin-stop-domain(1AS), asadmin-delete-domain(1AS), asadmin-list-domains(1AS)

J2EE 1.4 SDK							    March 2004						asadmin-start-appserv(1AS)