05-14-2009
sure. the IOUs on the back are basically slip down the middle. you can assign it to each domain. however, you need to realize that the dvd media tray is tied only to 1 domain. if you are making a 2 domain system, you can build from dvd on one and will then need to build from network on the other. however, you can get around this by attached an external scsi drive to the back of a scsi adapter (if you have one). for instance, my shop used an extra d240 to get around the dvd being only tied to 1 domain.
as for xscf commands... its pretty straight forward. if you are comfortable using the sc of say a 6900, you'll be fine here as well. i would give the xscf its own ip on its own non-routable network.
10 More Discussions You Might Find Interesting
1. Solaris
While entering to service mode on XSCF i getting following error
XSCF> service
Account is not enabled for service mode.
What could be the reason for this ? (5 Replies)
Discussion started by: fugitive
5 Replies
2. Solaris
Hi, I've got an issue here: After I logon to the xscf prompt of this Sun M5000 and did 'XSCF> version -c xcp', the xscf prompt disappeared. I can't get it back and can't log out.
exit
rebootxscf
logout
#.
#>
#>
~#
~#
exit
sendbreak
exit
I tried to set the Mode Switch to the service... (3 Replies)
Discussion started by: aixlover
3 Replies
3. UNIX for Advanced & Expert Users
Hi, We have two Sun M5000 systems. A is Oracle server and B is testing server. There are nine Solaris 10 zones set on A. SAN is connecting to A with ZFS configuration.
Now we want to set B to be a backup server of A and make the two as identical as possible. No VERITAS cluster, no Solaris... (3 Replies)
Discussion started by: aixlover
3 Replies
4. Solaris
Hi,
I've updated a few M3000s to new firmware without any hassle, but on one of them the following is happening:
XSCF> getflashimage -u wayner ftp://10.16.122.200/tftpboot/IKXCP1102.tar.gz
Error: insufficient free space
Any idea how to delete whatever old firmware is on there so I can... (7 Replies)
Discussion started by: cabaiste
7 Replies
5. Solaris
Hi,
I've configured this Sun M5000 to use two system domains (added a second domain to it). The following is the info about the settings. The showdevices command can't show devices on domain 1 because Solaris is not loaded on it yet.
My question: How can I confirm the hardware devices such as... (5 Replies)
Discussion started by: aixlover
5 Replies
6. Solaris
Hi,
I would appreciate some help.
I remotely access, across a VPN, an M5000 and when I connect to the XSCF I can then access the OS using console -d0 and then I can get to the console.
The problem I have is that I need to run something which will take many hours and I can't run it in the... (6 Replies)
Discussion started by: giles.cardew
6 Replies
7. Shell Programming and Scripting
I have 7 functions those need to be executed as command line inputs, I tried with below code it’s not executing function. If I run the ./script 2 then fun2 should execute , how to initiate that function I tried case and if else also, how to initiate function from command line
if
then... (8 Replies)
Discussion started by: saku
8 Replies
8. Solaris
Trying to update my M5000 firmware. trying to mount my USB to upload firmware and getting the following message.
XSCF> getflashimage -v file:///media/usb_msd/FFXCP1115.tar.gz
Free space: 97MB
Making sure mount point is clear
umount: /media/usb_msd is not mounted (according to mtab)
Trying... (2 Replies)
Discussion started by: soupbone38
2 Replies
9. Solaris
Hi,
I'm planning to upgrade the XSCF firmware on an M5000, and have a question regarding the OBP part of the upgrade. At the moment, the system looks like this:
XCP0 (Current): 1100
OpenBoot PROM : 02.18.0000
XSCF : 01.10.0000
root@server01 # /usr/sbin/prtconf -V
OBP 4.24.15... (3 Replies)
Discussion started by: badoshi
3 Replies
10. IP Networking
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
LEARN ABOUT DEBIAN
pwrkap_aggregate
pwrkap_aggregate(8) User Manuals pwrkap_aggregate(8)
NAME
pwrkap_aggregate - Present a large number of pwrkap servers as if they were one
SYNOPSIS
pwrkap_aggregate config_file
DESCRIPTION
pwrkap_aggregate is a daemon that connects to a multitude of pwrkap servers and power control domains, and presents them as if they were
one server with a smaller number of domains. By aggregating pwrkap server instances, it is possible to monitor many thousands of servers
without overworking the command console. It is also possible to give identical class designations to a group of pwrkap servers and manage
them as an aggregate.
OPTIONS
config_file
Text file mapping pwrkap servers to aggregated domains. See pwrkap_aggregate(5) for information about the config file format.
AUTHOR
Darrick J. Wong <djwong at us dot ibm dot com>
SEE ALSO
pwrkap_gtk(1), pwrkap_cli(1), pwrkap_aggregate(5), pwrkap_main(8)
Linux January 2009 pwrkap_aggregate(8)