pwrkap_cli(1) User Manuals pwrkap_cli(1)NAME
pwrkap_cli - Command line monitor and control program for pwrkap
SYNOPSIS
pwrkap_cli host:port
DESCRIPTION
pwrkap_cli is a command-line program that connects to a pwrkap server and downloads the hardware configuration and power configuration
domain data from the server. Power use, energy use, and system status are dumped to the screen when the server sends a status update, and
raw commands can be sent to the server.
OPTIONS
host:port
A hostname (or IP address) and a port to which this client should connect.
COMMAND FORMAT
The command format looks like this:
domain_name [ help | dump | cap new_cap ]
COMMANDS
domain_name
The name of the power configuration domain that the user wants to control.
help Displays a short help screen.
dump Displays the current hardware configuration and state of the server.
cap new_cap
Sets a new power cap and reconfigures the hardware to meet the cap.
AUTHOR
Darrick J. Wong <djwong at us dot ibm dot com>
SEE ALSO pwrkap_gtk(1), pwrkap_aggregate(8), pwrkap_main(8)Linux January 2009 pwrkap_cli(1)
Check Out this Related Man Page
XINE-REMOTE(1x)XINE-REMOTE(1x)NAME
xine-remote - a small tool to connect xine remote control server.
SYNOPSIS
xine-remote [options]
DESCRIPTION
This manual page documents briefly the xine-remote tool.
xine-remote can replace a raw telnet connection to a xine remote control server. It use the readline facilities (completion, vi/emacs
shortcuts, command history, etc...). By default, it try to connect the localhost, using the default port (see xine(1)).
OPTIONS
The program follow the usual GNU command line syntax, with long ioptions starting with two dashes (`-'). A summary of options are included
below.
-H, --host <hostname>
Try to connect <hostname>.
-P, --port <port>
Try to connect the host using <port>.
-c, --command <command>
Send <command> to server then quit. The command should be single quoted if it contain spaces or special characters.
-n, --noconnect
Do not initiate the connection on startup.
-v, --version
Display version.
-h, --help
Display options summary.
COMMANDS
Few commands are available, which are used to open or close a connection:
? Display available commands (the xine-remote ones + server ones when connection is established).
help <command>
Display the purpose of <command>, if that is omitted, display available commands.
syntax <command>
Display the usage of <command>.
version
Display version.
open <server[:port]>
Open connection to server. A port can be optionally specified, using colon (:) separator.
close Close connection.
quit Leaving xine-remote.
SEE ALSO xine(1).
AUTHOR
This manual page was written by Daniel Caujolle-Bert <f1rmb@users.sourceforge.net> for the xine project.
The xine project 2002-04-16 XINE-REMOTE(1x)
I have old SUN server on my desk. I know it worked before. I want to be able to connect to server from my PC. Just to establish a dump terminal.
1. I connected to power socket
2. I Have a cable that fits in (i believe is a com ports there are A B slots the same I plugged it in A). They are... (33 Replies)
Hi,
I have a sun ultra enterprise 450 server. There is no power supply to the peripheral components.
Can anyone suggest what might be the problem with the server?
What do i have to check for?
I am new to the solaris and server world. Please suggest in detail. :)
Thanks,
Ashwini (5 Replies)
Folks;
Is there a command to know if my hardware can run 64-bit or 32-bit?
I'm trying to re-install SUSE 64-bit on one of our server but i'm not sure if this server hardware designed for 32-bit only or for both
Any help? (14 Replies)
Hi, We have some troubles with our HP server (rx4640) running HP-UX 11.31. The server is attached to a JBod cabinet. If the JBod cabinet is powered on and we power on the server after then HP-UX can't find the devices (disks) at the cabinet. Does not help to run an ioscan -fnC disk. But if I power... (3 Replies)
Hi all!
Is it possible to install AIX 6.1 over preinstalled Power Systems server with AS400?.
Now hardware platfoem is identical.
quote
IBM had two discrete Power Architecture based hardware lines since the early 1990's. Servers running processors based on the PowerPC-AS in the AS/400... (3 Replies)
Hi everyone:
I have a server used for testing running FreeBSD, last weekend we had power cuts in my job and our server was constantly rebooting.
since then the network connections are very slow, it's almost impossible establish a remote connection with the server, however running any... (2 Replies)
have 3 mac all running osx 10.5.8. Two G4 power books and 1 power Mac G4.
I am able to connect each mac to each other by using the connect to server command in the finder menu but I can only get the icon of a connected volume to mount on the desktop. I can connect but I only see a window with... (3 Replies)
Hello,
I would like to turn off (mean no energy consumption) some servers during the weekend.
I would like to do it automatically so i thought to create macro commands to a shell client.The problem is that giving shutdown (shutdown -h now) the server(Sun X4200 M2) turn off but the fans are still... (5 Replies)
Hi,
How do i check the server configuration in Linux like the RAM size, OS version, type of database configured etc...basically i need everything about the server.
Is there a command to see this information??
Thanks in advance!!! (7 Replies)
dears, any one knows how to use linux command to monitor hp server Redhat dual power status? any 1 of power failure then alarm will triggered. (4 Replies)
i have doubt about how to power on server from remote location with out contacting with data center people? please anybody replay with whole info.
thank you. (3 Replies)
I switched on the power to the server. But, the server did not power on i.e., none of the 3 LEDs on the front panel is lighted.
(Power supplies are showing only amber LEDs with "Ready to remove" sign).
I tried to turn on the power supplies via System Controller menu (platform shell), but it... (6 Replies)