04-13-2009
unable to detect new cpu/memory module
Hi all,
I just add in new cpu/memory module into SFV480 and unable to see new module on slot B. I already try many way like only 1 new module and swap the both module and boot up but still unable to see it.
If I only install the module into slot B, then the server is unbootable at all.
I already change one new centerplane but still the same.
The error show below.
Desired Safari Bus speed 150MHz, selecting 150MHz
Configuring CPUs..........
... CPU0 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==> CPU 900MHz
Ecache 8MB 3.3ns mode=3-3-3 2-way ECCR: 0000.0000.0309.4400
... CPU2 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==> CPU 900MHz
Ecache 8MB 3.3ns mode=3-3-3 2-way ECCR: 0000.0000.0309.4400 ...Done
Setting system speed (and resetting)...
<*>
Set Speed Reset
@(#)OBP 4.6.8 2002/09/04 13:45 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 Ultra-III+ (v2.2) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.2) 6:1 900MHz 8MB 3:1 ECache
Executing Power On SelfTest w/%o0 = 0000.0000.0001.4042
0>Scan ring integrity
0>INFO: H/W under test = CPU Board Slot B (Cheetah 1, DCDS [0-7], SRAMs) Scan Ri
ng NOT Present or Shut OFF
0>INFO: H/W under test = CPU Board Slot B (Cheetah 3, SRAMs) Scan Ring NOT Prese
nt or Shut OFF
Already upgrade to latest OBP version.
Any idea pls help.
Thanks...
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello,
how can I detect the nr of cpu of my SUN E250 Solaris server? I have tryed with top but I was not able to find the information.
Thanks. (1 Reply)
Discussion started by: pbonato
1 Replies
2. UNIX for Dummies Questions & Answers
I am new user to linux Mandrake. I am unable to install my modem "D-Link". I have double booting such as windows 98se and linux Mandrake. Linux Mandrake automatically detects all other harewares but unable to detect my modem "D-Link". Please send reply in this regard what to do? (1 Reply)
Discussion started by: Masud Mallik
1 Replies
3. OS X (Apple)
I'm using Mac OS X 10.3.9.
My Problem is its not detect my memory card built in my camera.
I have reinstall new clean install my OS X but still persist.
Help me please... (2 Replies)
Discussion started by: shamsulamar
2 Replies
4. HP-UX
HI
I am getting core dump with "Memory re-allocation Failure" error can any one help me to get the possible reasons of getting this type of error, I am running the C++ code on HP-UX.
Please help me thanx in advance (1 Reply)
Discussion started by: gyanusoni
1 Replies
5. UNIX for Dummies Questions & Answers
Hi All,
Does anyone know what the best commands in the UNIX command line are for obtaining this info:
current CPU usage
memory usage
virtual memory usage
preferably with date and time parameters too?
thanks
ocelot (4 Replies)
Discussion started by: ocelot
4 Replies
6. Solaris
Hey guys i got this error in my messages:
warning : mod_load: cannot load module sbd
- I dont know anything about this.
- How do i verify if there is a module sbd
- What are the reasons modules cant be loaded (1 Reply)
Discussion started by: sbn
1 Replies
7. Solaris
Hi,
Recently one of my server V490 showed memory issues on
"Fault_PC 0x10158dec Esynd 0x01e2 Slot A: J3001"
Below is the prtdiag info
========================= Memory Configuration ===============================
Logical Logical Logical
MC Bank Bank Bank ... (6 Replies)
Discussion started by: mpics66
6 Replies
8. OS X (Apple)
Hi,
I am trying to install Unicode::String from the cpan shell, and here is what I get:
Checking if your kit is complete...
Looks good
Writing Makefile for Unicode::String
cp String.pm blib/lib/Unicode/String.pm
cp lib/Unicode/CharName.pm blib/lib/Unicode/CharName.pm... (3 Replies)
Discussion started by: psychomachine
3 Replies
9. Shell Programming and Scripting
Hi,
I am unable to install module using cpan. It says 407 Proxy Authentication Required
I did setup proxy server and given username and password in .bashrc file and apt.conf file.
export http_proxy=http://username:password@proxyserver:portno/
However, still unable to install... (1 Reply)
Discussion started by: Anjan1
1 Replies
10. Red Hat
Hi All,
We connected 2 new tape drives to the servers. I am not able to see both HP tape drives in OS level. I am using RHEL 6.2 OS.
I have scanned and rebooted the server but still can't able to find the drives.
Thanks in advance..!!!!
---------- Post updated 10-22-13 at 05:07 PM... (1 Reply)
Discussion started by: Navkreddy
1 Replies
usoc(7D) Devices usoc(7D)
NAME
usoc - universal serial optical controller for Fibre Channel arbitrated loop (SOC+) device driver
DESCRIPTION
The Fibre Channel adapter is an SBus card that implements two full duplex Fibre Channel interfaces. Each interface can connect to a Fibre
Channel arbitrated loop (FC-AL). The usoc device driver is a nexus driver and implements portions of the FC-2 and FC-4 layers of FC-AL.
FILES
/kernel/drv/usoc
32-bit ELF kernel module
/kernel/drv/sparcv9/usoc
64-bit ELF kernel module
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC |
+-----------------------------+-----------------------------+
|Interface stability |Unknown |
+-----------------------------+-----------------------------+
|Availability |SUNWusoc |
+-----------------------------+-----------------------------+
SEE ALSO
fctl(7D), sbus(4), fcp(7D), fp(7D), ssd(7D)
Writing Device Drivers
Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230: 1994
Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.272-1996
Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) NCITS TR-19:1998
Fabric Channel Loop Attachment (FC-FLA), NCITS TR-20:1998
DIAGNOSTICS
The following messages are logged and may also appear on the system console. On the console these messages are preceded by:
usoc%d:
where
usoc%d:
is the per-port instance number of the usoc controller.
Fibre Channel is ONLINE
The Fibre Channel loop is now online.
Fibre Channel Loop is ONLINE
The Fibre Channel loop is now online.
Fibre Channel Loop is OFFLINE
The Fibre Channel loop is now offline.
attach failed: device in slave-only slot.
Move soc+ card to another slot.
attach failed: alloc soft state.
Driver did not attach, devices will be inaccessible.
attach failed: bad soft state.
Driver did not attach, devices will be inaccessible.
attach failed: unable to map eeprom
Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to map XRAM
Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to map registers
Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to access status register
Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to install interrupt handler
Driver was not able to add the interrupt routine to the kernel. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to access host adapter XRAM
Driver was unable to access device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to write host adapter XRAM
Driver was unable to write device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: read/write mismatch in XRAM
Driver was unable to verify device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
SunOS 5.10 20 Jul 1999 usoc(7D)