03-04-2009
Reg. VXVM
Hi Guys,
I have a doubt either to Reboot the server after Replacing the disk0.
I have two disks under vxvm root mirrored and i had a problem with primary disk so i replace the disk0 failed primary disk and then mirrored. After mirroring is it reboot required ?
10 More Discussions You Might Find Interesting
1. Solaris
All solaris rescue gurus out there ....
I've a Solaris 2.6 E450 on which my sysadmin guy has deleted every file (not sub-directories) from the /etc directory.
The machine is (was) running Vxvm with the root volume encapsulated.
I've tried booting from CDROM, mounting the root volume... (3 Replies)
Discussion started by: andy11983
3 Replies
2. Filesystems, Disks and Memory
I've got a Linux box that I'm pretty sure is having some disk issues. iostat isn't installed, but vmstat is, so i've been trying to use that to do some initial diagnostics while I go through our company's change control process to get iostat installed.
The problem I'm having is that the disks... (4 Replies)
Discussion started by: kknigga
4 Replies
3. Solaris
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 sliced rootdisk rootdg online
c1t1d0s2 sliced disk01 rootdg online
c2t0d0s2 sliced actsvr101 actsvr1dg online
c2t2d0s2 sliced actsvr102 actsvr1dg online
c2t3d0s2 ... (13 Replies)
Discussion started by: incredible
13 Replies
4. Solaris
Hi,
Quick question if anyone knows this. Is there a command I can use in Veritas Volume manager on Solaris that will tell me what the name of the SAN I am connected to? We have a number of SANs so I am unsure which one my servers are connected to. Thanks. (13 Replies)
Discussion started by: gwhelan
13 Replies
5. Filesystems, Disks and Memory
:confused:
Last week I read that VxVM won't work with MPxIO (i don't recall the link) and that it should be unconfigured when installing VxVM. Today I read that VxVM works in "pass-thru" mode with MPxIO and DMP uses the devices presented by MPxIO.
If I create disks with MPxIO and use VxVM to... (1 Reply)
Discussion started by: bluescreen
1 Replies
6. Solaris
Hi community,
I've a hard question for you.
1)What are the differences between ZFS and Veritas Volume Manager on Solaris10?
2) what is the difference to manage the internal disks (Mirror)?
3) what is the difference to manage the external disks?
4) What is the difference to manage... (5 Replies)
Discussion started by: Sunb3
5 Replies
7. Solaris
Anyone knows that how many volumes can be created in a Diskgroup?
Thanks in advance... (1 Reply)
Discussion started by: bpsunadm
1 Replies
8. Solaris
hi all,
how can we check whether vxvm is installed in our system or not in solaris?
Thanks in advance
dinu (4 Replies)
Discussion started by: dinu
4 Replies
9. Emergency UNIX and Linux Support
I have VxVM 5.1 running on Solaris-10. I have to increase a application file-system and storage team gave me a lun. After scanning scsi port by cfgadm, I can see them in format output. I labelled it, but I am not able to see them in "vxdisk list".
I already tried commands -->
vxdctl enable... (4 Replies)
Discussion started by: solaris_1977
4 Replies
10. Solaris
Hi,
When we are running fsck in vxvm FS within few sec it will completed even if data is more than 500GB or in TB also.
compare to UFS FS in that it will take more time compare with vxvm.UFS check FS in block level. & then vvxm on where its checking the FS.
Please explain. (1 Reply)
Discussion started by: tiger09
1 Replies
LEARN ABOUT HPUX
bootconf
bootconf(4) Kernel Interfaces Manual bootconf(4)
NAME
bootconf - boot device configuration table
DESCRIPTION
The file contains the address and disk layout type of the system's boot devices or lif volumes. It is used by the and HP-UX kernel control
scripts (fileset to determine how and where to update the initial boot loader. Normally the kernel's script queries the system's hardware
and creates the file. In rare cases when either the system configuration cannot be automatically determined or additional and/or alternate
boot devices should be automatically updated, the administrator must edit the file manually.
There is one line in the file for each boot device. Each line contains the following blank-separated fields in the order shown:
disk type A flag indicating how the file system(s) on the disk are laid out. The flag must be one of the following:
Indicates that the root disk is in LVM or VERITAS Volume Manager
(VxVM) format. If LVM or VxVM mirrors are used, then each of the "mirrors" must have its own line in the file.
Indicates that the root disk is in the
"whole disk" format with no partitions, but boot and swap space are reserved outside the file system.
device file The absolute path of the device special file that accesses the physical device where the boot area is located. For LVM root
disks, the device special file is the physical volume(s) returned by the command. For "whole disks" this is the device file
that references the entire disk.
Blank lines are permitted. Any line beginning with a is considered to be a comment.
DIAGNOSTICS
The Software Distributor log file contains diagnostic messages under the fileset if the file is incorrect. Most of the messages are self-
explanatory; a few warrant additional explanation:
If there are no other messages about
the file is probably empty. Otherwise, the file is not in the proper format, and the other messages will explain what the problem
is.
The specified device file does not point to a disk where there is a
lif which contains the file
Some character other than
or is in the first field of a line.
As of release 10.0, the boot areas in
must all be on the same type of disk layout.
There are characters after the
device file specification.
EXAMPLES
The boot area is on an LVM root disk:
l /dev/disk/disk7_p2
The boot area is on a whole disk layout:
w /dev/disk/disk7
WARNINGS
All of the boot devices in the file must have the same disk layout.
AUTHOR
was developed by the Hewlett-Packard Company.
FILES
SEE ALSO
mediainit(1), hpux(1M), hpux.efi(1M), mkboot(1M), vgdisplay(1M), lif(4), intro(7).
documentation.
bootconf(4)