I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
Hi Everyone,
I have a problem. I'm trying too reinstall sun solaris 8.0 on may Sunfire 280r but solaris 9.0 is all ready installed. I tried to boot from cd rom it keeps telling me that File does not seem executable. I need to get Solaris 8.0 on this system. I have boot all ready in single mode... (4 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Good Afternoon,
I'm trying to boot from cdrom so I:
bash-2.05# init 0
{1} ok boot cdrom -s and I get:
Rebooting with command: boot cdrom -s
Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s
Can't read disk label.
Can't open disk label package
Evaluating:
Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
LEARN ABOUT XFREE86
sysdef
sysdef(1M) System Administration Commands sysdef(1M)NAME
sysdef - output system definition
SYNOPSIS
/usr/sbin/sysdef [-i] [-n namelist]
/usr/sbin/sysdef [-h] [-d] [-i] [-D]
DESCRIPTION
The sysdef utility outputs the current system definition in tabular form. It lists all hardware devices, as well as pseudo devices, system
devices, loadable modules, and the values of selected kernel tunable parameters.
It generates the output by analyzing the named bootable operating system file (namelist) and extracting the configuration information from
it.
The default system namelist is /dev/kmem.
OPTIONS -i Prints the configuration information from /dev/kmem. This is the default and only needs to be specified if the configura-
tion information from both /dev/kmem and the system file specified with the "-n namelist" option is needed.
-nnamelist Specifies a namelist other than the default (/dev/kmem). The namelist specified must be a valid bootable operating system.
-h Prints the identifier of the current host in hexadecimal. This numeric value is unique across all Sun hosts.
-d The output includes the configuration of system peripherals formatted as a device tree.
-D For each system peripheral in the device tree, display the name of the device driver used to manage the peripheral.
EXAMPLES
Example 1: Sample output format
The following example displays the format of the sysdef -d output:
example% sysdef -d
Node 'SUNW,Ultra-5_10', unit #-1
Node 'packages', unit #-1 (no driver)
Node 'terminal-emulator', unit #-1 (no driver)
Node 'deblocker', unit #-1 (no driver)
Node 'obp-tftp', unit #-1 (no driver)
Node 'disk-label', unit #-1 (no driver)
Node 'SUNW,builtin-drivers', unit #-1 (no driver)
Node 'sun-keyboard', unit #-1 (no driver)
Node 'ufs-file-system', unit #-1 (no driver)
Node 'chosen', unit #-1 (no driver)
Node 'openprom', unit #-1 (no driver)
Node 'client-services', unit #-1 (no driver)
Node 'options', unit #0
Node 'aliases', unit #-1 (no driver)
Node 'memory', unit #-1 (no driver)
Node 'virtual-memory', unit #-1 (no driver)
Node 'pci', unit #0
Node 'pci', unit #0
Node 'ebus', unit #0
Node 'auxio', unit #-1 (no driver)
Node 'power', unit #0
Node 'SUNW,pll', unit #-1 (no driver)
Node 'se', unit #0 (no driver)
Node 'su', unit #0
Node 'su', unit #1
Node 'ecpp', unit #-1 (no driver)
Node 'fdthree', unit #0
Node 'eeprom', unit #-1 (no driver)
Node 'flashprom', unit #-1 (no driver)
Node 'SUNW,CS4231', unit #0 (no driver)
Node 'network', unit #0
Node 'SUNW,m64B', unit #0
Node 'ide', unit #0
Node 'disk', unit #-1 (no driver)
Node 'cdrom', unit #-1 (no driver)
Node 'sd', unit #1
Node 'dad', unit #1
Node 'pci', unit #-1 (no driver)
Node 'SUNW,UltraSPARC-IIi', unit #-1 (no driver)
Node 'pseudo', unit #0
[output truncated]
FILES
/dev/kmem default operating system image
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO hostid(1), prtconf(1M), nlist(3ELF), attributes(5)SunOS 5.10 4 Oct 2004 sysdef(1M)