after ZFS can not restore VTOC of disk.. Post: 302262927

8 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Restore to disk from tape

I have been restoring from tape some old data. I have done quite a few tapes and have had no problems until now. The command I am running is "dd if=/dev/rmt/1hbn bs=1024 | tar -pBxF - ". This is the second tape have have come up with the error "Not enough space". This tape has a couple of...

2. Solaris

ZFS Restore Attempt

We currently have T2000 servers attached to Sun 3320 Storage Arrays. We run a database on the 3320 devices with the storage created through ZFS. We use 3 RAIDZ2 pools and then create our partitions from those. Now onto the question. If our T2000 fails and we swap out machines is there a way...

3. Solaris

Local Full Backup and Restore ZFS

Hi men, I'm testing for my backup&restore job with ZFS. My server have two disks. I wanna do backup&restore job like ufsdump utility: Disk0 is rpool(root zpool) and disk1 (backup zpool) will be stored full backup replicates. When rpool zpool have problem, i can "boot cdrom -s" and use my...

4. Solaris

Emergency - restore a deleted zfs snapshot

Hi, I deleted a zfs snapshot because it was as big as the original zfs. After the snapshot was removed, all the data in the original zfs is gone. How this happened? Can I restore the snapshot? Please help. Thanks a lot!

5. AIX

Dd of disk contains vg and restore on another m/c

Hello gurus, I have a requirement of backup of a vg containing a file system. vg1 contains 3 LV each of 50G size. They are coming out from ~350G harddisk. and only 150G is being used. Now, i want to dd this hdisk and restore to another machine. I am not sure how to go about this. Can some...

6. Solaris

ZFS Slice disk

Hi, How to to make a slice and define as ufs from zpool? Please advice me. Thanks. ---------- Post updated at 01:53 AM ---------- Previous update was at 12:24 AM ---------- Before slice: Part Tag Flag Cylinders Size Blocks 0 root wm 0 ...

7. Solaris

Restore of Netapp FC lun targets used as the disks for a zpool with exported zfs file systems

So, We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the...

8. HP-UX

How to restore from disk?

Our new rx2800 server is running HP-UX 11iV3. We have a cron script to perform an fbackup to a file on disk nightly. Now I'm trying to do a test restore, but I can't seem to find the correct way to specify the backup file as the source in frecover. Can anyone point me in the right direction? ...

LEARN ABOUT HPUX

efi_fsinit

efi_fsinit(1M)															    efi_fsinit(1M)

NAME

       efi_fsinit - write an EFI file system header on a device file

SYNOPSIS

       devicefile]

DESCRIPTION

       writes an EFI file system header on a device file.

       The EFI file system is based on the FAT file system and used by the Itanium-based system BIOS to locate an HP-UX bootloader.  See efi(4).

       Before any other EFI commands can be run, must be run to initialize the file system on a device file.

   Options
       recognizes the following option:

       Write the file system header on device
		      devicefile.   Without  the  option, uses the device file specified in the environment variable if it is defined.	The option
		      overrides the environment variable.

RETURN VALUE

       returns exit code 0 if the EFI file system is initialized successfully.	Otherwise it prints a diagnostic message and returns nonzero.

	    0	  Successful completion.
	   >0	  Error condition occurred.

EXAMPLES

       Write an EFI file system header on device file

       Write an EFI file system header on the persistent device file (see intro(7)):

AUTHOR

       was developed by HP.

SEE ALSO

       efi_cp(1M), efi_ls(1M), efi_mkdir(1M), efi_rm(1M), efi_rmdir(1M), efi(4), intro(7).

							   Itanium(R)-based Systems Only					    efi_fsinit(1M)