11-06-2008
Quote:
Originally Posted by
jayfriend
Thank you Otheus!
My PC is too slow even at boot up for some of the logins, it takes around 5 to 10 min to take me to the desktop after I enter the username and password.
I tested it without turning ON the VMware, but the performance hasn't changed much. Is it because I am using AMD processor. As far as I know it shouldn't be problem, please correct me if I am wrong.
For sure it's not the processor (Look at your vmstat; see the column "id"? that means what percent of the time (per second) that your CPU is doing nothing (idle).) I also suspect it's not memory since you disabled VMware. Therefore, I suspect it's (a) slow or misconfigured hard drive or (b) bad hardware on the bus causing too many interrupts.
Let's start with the hard drive.
How much free space do you have on your drive? Show us the output of "df - k" please.
Then Read this :
Tuning IDE Hard Disk Performance
If you have a 5400 RPM drive and it's using a 33 MHz bus, then it's going to be slow.
8 More Discussions You Might Find Interesting
1. HP-UX
sorry wrong forum..i dont know how to delete this or how to move it to HP UX section...
I tested SAX XML parsing using xerces(http://xerces.apache.org/xerces-j/). I tested on Windows XP and HP-UX . I found that parsing time on HP is 5 times that on Windows. My server startup reads a lot of XML... (1 Reply)
Discussion started by: saurabh.sid
1 Replies
2. Solaris
Is it possible to build Boost 1.35 using Sun Studio 10?
I can build Boost 1.35 using Sun Studio 11 successful. However, i'm unable to build it using Sun Studio 10 using the exact method.
I really apprecaite if any expert can help on this.
Thanks, (2 Replies)
Discussion started by: shingpui
2 Replies
3. Solaris
Hi All
I am working unders Sun Solaris and I am not
"/opt/boost/boost/thread/detail/thread.hpp", line 344: Error: boost::thread::thread(boost::thread&) is not accessible from boost::move(boost::detail::thread_move_t<boost::thread>).
Do you know if there are other solutions other than... (2 Replies)
Discussion started by: manustone
2 Replies
4. Solaris
I always had helpful replies from this site when ever I have posted a question.
My current problem is that I am trying to read a book titled "Solaris(TM) Performance and Tools: DTrace and MDB Techniques for Solaris 10" and I am frustrated because inspite of the fact that it is a good book I just... (2 Replies)
Discussion started by: Tirmazi
2 Replies
5. Programming
Hi,
Based on the following example in the Boost C++ website:
www. boost.org/doc/libs/1_47_0/doc/html/boost_asio/example/echo/async_tcp_echo_server.cpp]doc/html/boost_asio/example/echo/async_tcp_echo_server.cpp
I tried to create a similar TCP server that waits to accept a client connection... (0 Replies)
Discussion started by: tanlccc
0 Replies
6. UNIX for Dummies Questions & Answers
Hello all,
I am trying to "make" a database system, VDB (Veritas Data Base), and when I run "make" I receive the following error:
VDBException.h:19: error: expected `)' before '*' token
VDBException.h:20: error: expected `)' before '*' token
VDBException.h:43: error: expected `)' before '*'... (4 Replies)
Discussion started by: Tyler_92
4 Replies
7. Programming
Hi,
I just started using CMake and the Boost Libraries. In this progress I encountered some problems.
One of these problems is combining Boost unit tests with cmake. I don't know how to set the whole project up. I tried to set up a simple test project. This contains a main.cpp a comp.cpp and the... (0 Replies)
Discussion started by: ElCoyote
0 Replies
8. Programming
I am trying to use the split provided by boost.
I have a string and want to split on "/".
string value = "trig/4";
Have no idea how to compile and link it. I have extracted boost in
/chrisd/tomso-12.04/source/library/boost_1_52_0 In my program /raytrac.cc I have put
... (5 Replies)
Discussion started by: kristinu
5 Replies
WREN(3) Library Functions Manual WREN(3)
NAME
wren, ata - hard disk interface
SYNOPSIS
bind #H[drive] /dev
bind #w[target[.lun]] /dev
/dev/hd0disk
/dev/hd0partition
/dev/sd0disk
/dev/sd0partition
...
DESCRIPTION
The hard disk interfaces (wren, #w, is a SCSI disk; ata, #H, is an IDE or ATA disk) serve a one-level directory giving access to the hard
disk partitions. The parameter to attach defines the numerical SCSI target and logical unit number or the IDE drive number to access.
Both default to zero.
Each partition name is prefixed by hd and the numeric drive identifier. The partition always exists and covers the entire disk. The size
of each partition as reported by stat(2) is the number of bytes in the partition, so the size of is the size of the entire disk.
The partition also always exists; it is the last block on the disk for SCSI, second to last for IDE. If it contains valid partition data,
those partitions will be visible as well. Every time the device is bound, the partitions are updated to reflect any changes in the parti-
tion file.
The format of the partition file is the string
plan9 partitions
on a line, followed by partition specifications, one per line, consisting of a name and textual strings for the block start and limit for
each partition on the disk.
The program prep(8) writes the partition table for the disk; its use is preferred to writing it by hand.
SEE ALSO
prep(8), scsi(3)
SOURCE
/sys/src/9/port/devwren.c
/sys/src/9/pc/devata.c
WREN(3)