07-27-2008
why boot? has the machine crashed?
if you are at the "ok" prompt, try the command "devalias" and look for aliases with "vx" or "veritas" in them, then try to boot with "boot alias".
9 More Discussions You Might Find Interesting
1. Solaris
I've looked a little but haven't found a solid answer, assuming there is one.
What's better, hardware mirroring or ZFS mirroring? Common practice for us was to use the raid controllers on the Sun x86 servers. Now we've been using ZFS mirroring since U6. Any performance difference? Any other... (3 Replies)
Discussion started by: Lespaul20
3 Replies
2. Solaris
Hi all
Can someone explain to me the different syntax regarding how root / mirror disks are represented. I never truely understand the namely / device tress etc.
Let me give you an example. On one my my servers, the root and mirror drives are :-
A domain on a sunfire 6800 :- ... (6 Replies)
Discussion started by: sbk1972
6 Replies
3. Solaris
Hi ,
I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through
metainit d51 1 1 c0t0d0s2
metainit d52 1 1 c1t0d0s2
In the next step
metainit d50 -m d51
d50: Mirror is setup
next step is
metaattach d50 d52
d50 : submirror d52 is... (7 Replies)
Discussion started by: vr_mari
7 Replies
4. Solaris
Hi all
I wish to mirror for the root disk, but last time i do, make the server cannot boot up. :p So this time, hope you guys can assist me on it. =)
At the last code, is the step i wish to do. Please help to check and correct me if got any wrong.
root@leo # format </dev/null
Searching for... (17 Replies)
Discussion started by: SmartAntz
17 Replies
5. Solaris
Hi All
After downloading ZFS documentation from oracle site, I am able to successfully migrate UFS root FS without zones to ZFS root FS. But in case of UFS root file system with zones , I am successfully able to migrate global zone to zfs root file system but zone are still in UFS root file... (2 Replies)
Discussion started by: sb200
2 Replies
6. HP-UX
what is the difference between DRD and Root Mirror Disk using LVM mirror ? (3 Replies)
Discussion started by: maxim42
3 Replies
7. Shell Programming and Scripting
Hi Folks, I have taken a backup of root filesystem with tar. Please help me to write a ksh script to automate restoration and root mirror in solaris 10.
Thanks in advance. (1 Reply)
Discussion started by: wills
1 Replies
8. Solaris
I have to do patching in single user mode in solaris 10 zfs root pool. Before that I have to detach the root mirror pool so that if patching fails then I can boot from detached root mirror pool. Please let me know how can I detach root pool
bash-3.2# zpool status
pool: rpool
state: ONLINE... (5 Replies)
Discussion started by: hb00
5 Replies
9. Solaris
Got a V490 with one existing root disk. Other disk slot was never populated.
Want to ensure we've got disk mirroring.
Currently vfstab mounts the physical disk - no mirroring set up.
Whats best way to achieve this without losing current disk? (1 Reply)
Discussion started by: psychocandy
1 Replies
LEARN ABOUT POSIX
installgrub
installgrub(1M) installgrub(1M)
NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)