data transfer from serial port Post: 302215423

9 More Discussions You Might Find Interesting

1. SCO

Serial File Transfer

I need to transfer files from a sco/unix system to a windows xp system and they are only connected via a digiboard serial connection. The terminal emulation software connects and runs a program but I need to transfer files. Anyone know a good solution?

2. Programming

how i can transfer and receive file in any format over serial port

helo i m using fedora core 6 o.s. i want to develop application using c,c++ which transfer file in any format(like pdf,txt,doc etc) over the serial port and i want to receive the same file from the serial port please guide me. amit

3. SCO

Need some advice concerning file transfer with a serial connection

Hi, I have a SCO Unix ver 5.0.7 from which I need to get some files. The problem is that I'm working remotely (have no physical access) and using Dejawin because this server is only has a serial connection to a Windows machine. Ucopy isn't on the server. What I was thinking is to do a print...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. Shell Programming and Scripting

file transfer using AWK over serial port

I have a unix system that only has AWK to program with which hooks up to a windows or linux based system with all progamming and software capabilities. The link between the systems is typically a 9600 baud TTY port on the AWK system and COM1 on the other system. I can cat <filenm> from the unix...

6. Programming

Wrong data with Read from a serial port.

hi, I've a problem on my C/C++ program with Posix Library. I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros: "2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,...

7. Programming

Serial file transfer protocol / checksums

Hello ppl, I'm working on a windows program simulating an existing Unix program, the program is a firmware downloader, it sends a binary firmware file through the serial port (rs232) to a Set-Top Box running under unix system too, as i'm a poor unix user and not a unix programmer i choosed the...

8. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

9. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT CENTOS

rdma_xserver

RDMA_XSERVER(1) 						     librdmacm							   RDMA_XSERVER(1)

NAME

       rdma_xserver - RDMA CM communication server test program

SYNOPSIS

       rdma_xserver [-p port] [-c comm_type]

DESCRIPTION

       Uses the librdmacm to establish various forms of communication and exchange data.

OPTIONS

       -p port
	      Changes the port number that the server listens on.  By default the server listens on port 7471.

       -c communication type
	      Specifies  the  type  of	communication  established  with  the  client  program.  'r' results in using a reliable-connected QP (the
	      default).  'x' uses extended reliable-connected XRC QPs.

NOTES

       Basic usage is to start rdma_xserver, then connect to the server using the rdma_xclient program.

       Because this test maps RDMA resources to userspace, users must ensure that they have available system resources and permissions.   See  the
       libibverbs README file for additional details.

SEE ALSO

       rdma_cm(7), udaddy(1), mckey(1), rping(1), rdma_server(1), rdma_xclient(1)

librdmacm							    2011-06-15							   RDMA_XSERVER(1)