hard disk and san Post: 302204794

10 More Discussions You Might Find Interesting

1. AIX

AIX disk less with SAN

Hi All, I have mirrored SAN volume on my B80 rootvg. Can I just remove the mirror and "Remove a P V from a V G" and it will be a diskless AIX? Is that going to boot on SAN rootvg volume? Thanks in advance, itik

2. Solaris

SAN disk failure

hi all, have a solaris 9 OS and a SAN disk which used to work fine is not getting picked up by my machine. can anyone point out things to check in order to troubleshoot this ?? thanks in advance.

3. Filesystems, Disks and Memory

SAN Disk w/o Cluster

Scenario: I've got 2 M5000's connected to a 9985 SAN storage array. I have configured the SAN disks with stmsboot, format and newfs. I can access the same SAN space from both systems. I have created files from both systems on the SAN space. Question: Why can't I see the file created...

4. Solaris

SAN - Hard loop / prefered paths - help

Hi all Right, Im a little bit thick when it comes to SAN :-) IVe got a dual port qlc in a solaris 10 server. Its all connected and I can see a number of disks. The SAN guy here has asked me about preferred paths, i.e. as the dual ports are connected to two fabrics, etc device will have 4...

5. Solaris

SAN connection - configuring fibre attached hard drive

Hi All, I recently got a connection to the SAN through a fibre channel on my solaris box: #luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED #ls -l /dev/cfg lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc I then...

6. SCO

declare disk driver for IDE hard disk

hi I've a fresh installation of SCO 5.0.7 on the IDE hard disk. For SCSI hard disk I can declare, for example blc disk driver using: # mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk?

7. UNIX for Dummies Questions & Answers

SAN and Disk I/O ... do we care?

Hi all, My main function is as a DBA. Another person manages the server and the SAN. I just want to know if I should be worried about high disk I/O or is it irrelevant as the I/O "load balancing" will be "taken care" of by the SAN? For example, I have hdisk1-5 and I can see that there are...

8. Solaris

I/O Error on SAN Disk

Hi, I have a production solaris 10 SPARC system (portal). Yesterday legato/Networker gave an I/O Error on one of the files on its SAN mounted disk. I went to that particular file on the system, did an ls and it showed the file. However, ls -l did not work and it said IO error. ...

9. Linux

C++ Code to Access Linux Hard Disk Sectors (with a LoopBack Virtual Hard Disk)

Hi all, I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it...

10. UNIX for Beginners Questions & Answers

SAN vs. Local disk.

I am in the market looking to purchase a new E950 server and I am trying to decide between using local SSD drives or SSD based SAN. The application that will be running on this server is read-intensive so I am looking for the most optimal configuration to support this application. There are no...

LEARN ABOUT CENTOS

gnome-disks

GNOME-DISKS(1)							gnome-disk-utility						    GNOME-DISKS(1)

NAME

       gnome-disks - the GNOME Disks application

SYNOPSIS

       gnome-disks [OPTIONS]

DESCRIPTION

       gnome-disks is the command to launch the GNOME Disks application. Disks provides a way to inspect, format, partition and configure disks
       and block devices.

       The Disks application is single-instance. What this means is that if the application is not already running when the gnome-disks command is
       invoked, it will get launched and the command invocation will block until the application exits. Otherwise the existing application
       instance will be used and the gnome-disks command will exit immediately.

OPTIONS

       The following options are understood:

       --block-device DEVICE
	   Switches to the Disks application and selects the block device given by DEVICE (for example, /dev/sda).

       --block-device DEVICE --format-device [--xid WINDOW-ID]
	   Shows the "Format Volume" dialog for the block device given by DEVICE (for example, /dev/sdb1). If WINDOW-ID is given, makes the dialog
	   transient to the given XID.

       --help
	   Prints a short help text and exits.

AUTHOR

       Written by David Zeuthen <zeuthen@gmail.com> with a lot of help from many others.

BUGS

       Please send bug reports to either the distribution bug tracker or the upstream bug tracker at
       https://bugzilla.gnome.org/enter_bug.cgi?product=gnome-disk-utility.

SEE ALSO

       gnome-disk-image-mounter(1), udisks(8)

GNOME
								    March 2013							    GNOME-DISKS(1)

10 More Discussions You Might Find Interesting

1. AIX

AIX disk less with SAN

Discussion started by: itik

2. Solaris

SAN disk failure

Discussion started by: cesarNZ

3. Filesystems, Disks and Memory

SAN Disk w/o Cluster

Discussion started by: bluescreen

4. Solaris

SAN - Hard loop / prefered paths - help

Discussion started by: sbk1972