network management port Post: 302203175

Sponsored Content

Operating Systems Solaris network management port Post 302203175 by upengan78 on Friday 6th of June 2008 07:22:08 PM

06-06-2008

Registered User

Thanks

Quote:

if_network="true"
if_modem="false"
if_connection="ssh"
if_emailalerts="false"
sys_autorestart="xir"
sys_bootrestart="none"
sys_bootfailrecovery="none"
sys_maxbootfail="3"
sys_xirtimeout="900"
sys_boottimeout="900"
sys_wdttimeout="60"
netsc_tpelinktest="true"
netsc_dhcp="false"
netsc_ipaddr="192.168.1.5"
netsc_ipnetmask="255.255.255.0"
netsc_ipgateway="192.168.1.1"
mgt_mailhost=""
mgt_mailalert=""
sc_customerinfo=""
sc_escapechars="#."
sc_powerondelay="false"
sc_powerstatememory="false"
sc_clipasswdecho="true"
sc_cliprompt="sc"
sc_clitimeout="0"
sc_clieventlevel="2"
sc_backupuserdata="true"
sys_eventlevel="2"

Is this correct ?

I am not able to connect when I do ssh 192.168.1.5

cable is connected from NM port to switch

GW is pingable. ( from the host itself )

Quote:

ping -s 192.168.1.1
PING 192.168.1.1: 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0. time=0.618 ms
64 bytes from 192.168.1.1: icmp_seq=1. time=0.648 ms
^X^C
----192.168.1.1 PING Statistics----
2 packets transmitted, 2 packets received, 0% packet loss
round-trip (ms) min/avg/max/stddev = 0.618/0.633/0.648/0.021

Last edited by upengan78; 06-06-2008 at 08:28 PM..

upengan78

View Public Profile for upengan78

Find all posts by upengan78

8 More Discussions You Might Find Interesting

1. Solaris

disconnecting from serial management port

On v240's and v440's whenever i connect my laptop to the serial management port and when either the laptop goes into sleep mode, or i physicall disconnect the cable, the solaris boxes go to the ok prompt!!!! anyone have any idea...

2. IP Networking

network speed not tale with the port setting

Hi all, one of my Sun Box facing the problem. The network port i had set to Auto-Negotiated and i had edited the /etc/system/ file in the Sun box as below: set hme:hme_adv_autoneg_cap=1 set hme:hme_adv_100fdx_cap=0 set hme:hme_adv_100hdx_cap=0 But when i checked the /var/adm/messages/, it...

3. IP Networking

Network Management Software

We are a small legal firm in the UK and looking to upgrade from some open source network management tools we are using. I'm not finding very many commercially supported network management software solutions that run on Linux or UNIX for that matter. Does anyone have any recommendations? ...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. Solaris

How to clear network socket port 17005?

:)Hi Solaris Experts, I am wondering whether it is possible to clear a network socket port 17005 left by Apache Tomcat/6.0.20 after having to terminate it forcefully, since it has run away due to remote JDBC resource contention on another server. A normal Tomcat stop / shutdown proves...

6. IP Networking

Facing issue in ip6table rule for port based routing management

Hi, Please help me on issue described below, I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4. M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop. At M2, I have done following,...

7. Infrastructure Monitoring

How do I know what traffic is in network port?

If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ? ps. because I always found the network is very slow , so I would like what the network port is doing . Thanks Login ID ust3 is currently in read-only mode for multiple infractions. Creating...

8. UNIX for Beginners Questions & Answers

Check network Linux management

hi, how can I make a acquaintance with the command ifconfig -a which address ip mangement. Thank you regards Francesco Itollo

LEARN ABOUT CENTOS

ibv_rc_pingpong

IBV_RC_PINGPONG(1)						   USER COMMANDS						IBV_RC_PINGPONG(1)

NAME

       ibv_rc_pingpong - simple InfiniBand RC transport test

SYNOPSIS

       ibv_rc_pingpong [-p port] [-d device] [-i ib port] [-s size] [-r rx depth] [-n iters] [-l sl] [-e] HOSTNAME

       ibv_rc_pingpong [-p port] [-d device] [-i ib port] [-s size] [-r rx depth] [-n iters] [-l sl] [-e]

DESCRIPTION

       Run a simple ping-pong test over InfiniBand via the reliable connected (RC) transport.

OPTIONS

       -p, --port=PORT
	      use TCP port PORT for initial synchronization (default 18515)

       -d, --ib-dev=DEVICE
	      use IB device DEVICE (default first device found)

       -i, --ib-port=PORT
	      use IB port PORT (default port 1)

       -s, --size=SIZE
	      ping-pong messages of size SIZE (default 4096)

       -r, --rx-depth=DEPTH
	      post DEPTH receives at a time (default 1000)

       -n, --iters=ITERS
	      perform ITERS message exchanges (default 1000)

       -l, --sl=SL
	      use SL as the service level value of the QP (default 0)

       -e, --events
	      sleep while waiting for work completion events (default is to poll for completions)

SEE ALSO

       ibv_uc_pingpong(1), ibv_ud_pingpong(1), ibv_srq_pingpong(1)

AUTHORS

       Roland Dreier
	      <rolandd@cisco.com>

BUGS

       The  network  synchronization between client and server instances is weak, and does not prevent incompatible options from being used on the
       two instances.  The method used for retrieving work completions is not strictly correct, and race conditions may  cause	failures  on  some
       systems.

libibverbs							  August 30, 2005						IBV_RC_PINGPONG(1)