06-06-2008
network management port
Hi I am using SF 240 and solaris 10 and I connected a cable to network management on server and other end to a switch.
What configurations do I need on server to ssh or telnet to the network management port from remotely ?
I also installed ALOM firmware. Is there anything else required on server or network side ?
Please let me know
Thanks
8 More Discussions You Might Find Interesting
1. Solaris
On v240's and v440's whenever i connect my laptop to the serial management port and when either the laptop goes into sleep mode, or i physicall disconnect the cable, the solaris boxes go to the ok prompt!!!! anyone have any idea... (3 Replies)
Discussion started by: csaunders
3 Replies
2. IP Networking
Hi all, one of my Sun Box facing the problem.
The network port i had set to Auto-Negotiated and i had edited the /etc/system/ file in the Sun box as below:
set hme:hme_adv_autoneg_cap=1
set hme:hme_adv_100fdx_cap=0
set hme:hme_adv_100hdx_cap=0
But when i checked the /var/adm/messages/, it... (0 Replies)
Discussion started by: AirWalker83
0 Replies
3. IP Networking
We are a small legal firm in the UK and looking to upgrade from some open source network management tools we are using.
I'm not finding very many commercially supported network management software solutions that run on Linux or UNIX for that matter.
Does anyone have any recommendations?
... (2 Replies)
Discussion started by: ctrenton
2 Replies
4. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
5. Solaris
:)Hi Solaris Experts,
I am wondering whether it is possible to clear a network socket port 17005 left by Apache Tomcat/6.0.20 after having to terminate it forcefully, since it has run away due to remote JDBC resource contention on another server. A normal Tomcat stop / shutdown proves... (2 Replies)
Discussion started by: gjackson123
2 Replies
6. IP Networking
Hi,
Please help me on issue described below,
I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4.
M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop.
At M2, I have done following,... (1 Reply)
Discussion started by: rahulbhansali24
1 Replies
7. Infrastructure Monitoring
If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ?
ps. because I always found the network is very slow , so I would like what the network port is doing .
Thanks
Login ID ust3 is currently in read-only mode for multiple infractions. Creating... (0 Replies)
Discussion started by: ust03
0 Replies
8. UNIX for Beginners Questions & Answers
hi, how can I make a acquaintance with the command ifconfig -a which address ip mangement.
Thank you
regards
Francesco Itollo (2 Replies)
Discussion started by: Francesco_IT
2 Replies
LEARN ABOUT CENTOS
ibv_rc_pingpong
IBV_RC_PINGPONG(1) USER COMMANDS IBV_RC_PINGPONG(1)
NAME
ibv_rc_pingpong - simple InfiniBand RC transport test
SYNOPSIS
ibv_rc_pingpong [-p port] [-d device] [-i ib port] [-s size] [-r rx depth] [-n iters] [-l sl] [-e] HOSTNAME
ibv_rc_pingpong [-p port] [-d device] [-i ib port] [-s size] [-r rx depth] [-n iters] [-l sl] [-e]
DESCRIPTION
Run a simple ping-pong test over InfiniBand via the reliable connected (RC) transport.
OPTIONS
-p, --port=PORT
use TCP port PORT for initial synchronization (default 18515)
-d, --ib-dev=DEVICE
use IB device DEVICE (default first device found)
-i, --ib-port=PORT
use IB port PORT (default port 1)
-s, --size=SIZE
ping-pong messages of size SIZE (default 4096)
-r, --rx-depth=DEPTH
post DEPTH receives at a time (default 1000)
-n, --iters=ITERS
perform ITERS message exchanges (default 1000)
-l, --sl=SL
use SL as the service level value of the QP (default 0)
-e, --events
sleep while waiting for work completion events (default is to poll for completions)
SEE ALSO
ibv_uc_pingpong(1), ibv_ud_pingpong(1), ibv_srq_pingpong(1)
AUTHORS
Roland Dreier
<rolandd@cisco.com>
BUGS
The network synchronization between client and server instances is weak, and does not prevent incompatible options from being used on the
two instances. The method used for retrieving work completions is not strictly correct, and race conditions may cause failures on some
systems.
libibverbs August 30, 2005 IBV_RC_PINGPONG(1)