Sponsored Content
Full Discussion: san luns controller problem
Operating Systems AIX san luns controller problem Post 302180185 by Cesar Delgado on Sunday 30th of March 2008 09:47:52 AM
Old 03-30-2008
Hi

Ok, when using IBM DS4x series please be sure to run the compatibilty matrix in order to install the correct RDAC fileset levels and well as the latest available firmware for your server's HBAs.

You need to place a call to IBM HW support for that DS4000 Storage System. I recently had a problem with one of my customer's DS4500 systems and it turns to be a problem with the battery that stop access to one controller so LUNs with prefered path to tha controller tried to do failover and errors we logged at AIX level.

Hope this helps
 

10 More Discussions You Might Find Interesting

1. Linux

problem with disks on SAN

Hi I have a linux box attched to a SAN storage from EMC with RAID 5 .I understand that it has 3g cache howver a 20gb file creation takes too much time here are my results any ideas why time dd if=/dev/zero of=disk.img bs=1048576 count=20000 20000+0 records in 20000+0 records out 997.59s... (2 Replies)
Discussion started by: xiamin
2 Replies

2. Solaris

Thoughts/experiences of SAN attaching V880 to EMC SAN

Hi everyone, I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN? At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the... (2 Replies)
Discussion started by: si_linux
2 Replies

3. Solaris

Problem with accessing SAN disks

Hi, I'm having a problem when attempting to define the OCR location for my 10g RAC setup on Solaris 10. I get the following error: The specified shared raw partition /dev/did/rdsk/d1s0 may not have the correct permission. Verify that the partition is owned by Oracle user. As per the Oracle10g... (15 Replies)
Discussion started by: michael.chow
15 Replies

4. HP-UX

Target LUNs plus que deux sur un SAN de 2 fabrics

salut admin, Normalement mon serveur doit voir un de mes LDEV à partir de deux chemins sur le SAN et ainsi lui attribuer seulement deux Target LUNs. Or il lui en a attribué 8!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Très bizzare! Auriez vous une idée. Merci pour votre aide appréciée (2 Replies)
Discussion started by: hmaiida
2 Replies

5. Solaris

need help for removing SAN LUNS on solaris 9

Hi I would like to remove SAN luns from system and do not want them even after system reboot, format Searching for disks...done df -kh I know last 4 partitions are from SAN but there could be more. Can someone please help me correct steps to remove SAN Luns. vxdisk list ... (2 Replies)
Discussion started by: upengan78
2 Replies

6. Hardware

Problem with External Raid Controller.

Hi, We have a Sunfire 4150 with On-Board Internal Raid Controller connected to 4 X 146 GB SAS disks. This also has an External Raid Controller (Storagetek Eight-Port, External HBA Model SG-XPCIESAS-R-EXT-Z) connected to a JBOD array ( Storagetek XTA2530 ) which has 5 X 300 GB Hard disk. ... (1 Reply)
Discussion started by: ranjansukumar
1 Replies

7. UNIX and Linux Applications

Controller problem: Error calling DSRunJob

Hi I got this error : Controller problem: Error calling DSRunJob(JOBNAME.), code=-2 can some tell me, what it means? (0 Replies)
Discussion started by: Avi
0 Replies

8. Solaris

SAN-based LUNs

running Solaris10 with Qlogic FC adapters connected to a multi-host FC array..using VXFS/VXVM.. Is there in Solaris10 or using some Qlogic drivers to filter out only the LUNs this host can see ?? Normally this is done by LUN masking in the FC switch or the FC array itself..however, neither... (2 Replies)
Discussion started by: ppchu99
2 Replies

9. Solaris

Are these SAN LUNs really not mounted?

Hello everyone. I've been asked to check if something is wrong with the storage setup on these two SunOS 5.10 machines, which are being used as database servers with Oracle RAC configuration. Seems to be that the DB guy is complaining, telling that they are nearly out of space, which sounds... (4 Replies)
Discussion started by: kacareu
4 Replies

10. Filesystems, Disks and Memory

Faster way: SAN hd to SAN hd copying

hi! i got a rhel 6.3 host that already have an xfs filesystem mounted from a SAN (let's call it SAN-1) whose size is 9TB. i will be receiving another SAN (let's call it SAN-2) storage of 15TB size. this new addition is physically on another SAN storage. SAN-1 is on a Pillar storage while the new... (6 Replies)
Discussion started by: rino19ny
6 Replies
rsm_get_controller(3RSM)			      Remote Shared Memory Library Functions				  rsm_get_controller(3RSM)

NAME
rsm_get_controller, rsm_get_controller_attr, rsm_release_controller - get or release a controller handle SYNOPSIS
cc [ flag... ] file... -lrsm [ library... ] #include <rsmapi.h> int rsm_get_controller(char *name, rsmapi_controller_handle_t *controller); int rsm_get_controller_attr(rsmapi_controller_handle_t chdl, rsmapi_controller_attr_t *attr); int rsm_release_controller(rsmapi_controller_handle_t chdl); DESCRIPTION
The controller functions provide mechanisms for obtaining access to a controller, determining the characteristics of the controller, and releasing the controller. The rsm_get_controller() function acquires a controller handle through the controller argument. The name argument is the specific con- troller instance (for example, "sci0" or "loopback"). This controller handle is used for subsequent RSMAPI calls. The rsm_get_controller_attr() function obtains a controller's attributes through the attr argument. The chdl argument is the controller handle obtained by the rsm_get_controller() call. The attribute structure is defined in the <rsmapi> header. The rsm_release_controller() function releases the resources associated with the controller identified by the controller handle chdl, obtained by calling rsm_get_controller(). Each rsm_release_controller() call must have a corresponding rsm_get_controller() call. It is illegal to access a controller or segments exported or imported using a released controller. RETURN VALUES
Upon successful completion, these functions return 0. Otherwise, an error value is returned to indicate the error. ERRORS
The rsm_get_controller(), rsm_get_controller_attr(), and rsm_release_controller() functions can return the following errors: RSMERR_BAD_CTLR_HNDL Invalid controller handle. The rsm_get_controller() and rsm_get_controller_attr() functions can return the following errors: RSMERR_BAD_ADDR Bad address. The rsm_get_controller() function can return the following errors: RSMERR_CTLR_NOT_PRESENT Controller not present. RSMERR_INSUFFICIENT_MEM Insufficient memory. RSMERR_BAD_LIBRARY_VERSION Invalid library version. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ |MT-Level |MT-Safe | +-----------------------------+-----------------------------+ SEE ALSO
rsm_memseg_export_create(3RSM), rsm_memseg_import_connect(3RSM), attributes(5) SunOS 5.10 8 Jun 2001 rsm_get_controller(3RSM)
All times are GMT -4. The time now is 08:00 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy