02-26-2008
Hi bakunin,
I believe I have solved my problem if I add it with the Route Type of "net" option instead of the "host" option it does not go away. The OS Level is 5200-03. I was having the same "problem" on test and the OS Level is 5200-10. Here is the output of lsattr:
authm 65536 Authenticati
on Methods True
bootup_option no Use BSD-styl
e Network Configuration True
gateway Gateway
True
hostname lawprod Host Name
True
rout6 IPv6 Route
True
route host,-hopcount,0,,,,208.240.15.130,10.50.0.100 Route
True
route net,-hopcount,0,,,,208.240.15.130,10.50.0.100 Route
True
route net,-hopcount,0,,0,10.50.25.1 Route
True
route host,-hopcount,0,,-if,en1,,208.240.15.130,10.50.0.100 Route
True
This of course shows after I added the static route I was having trouble with. Thank you for your response.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I need some help adding routes in sco.
I am using SCO Openserver 5.0.4.
Basically I have 2 gateways here. The first is 10.15.1.1 and allows me access to the rest of the computers in the office and in other offices.
The other gateway is 10.15.10.2 and is the sonicwall that will allow access... (3 Replies)
Discussion started by: cstovall
3 Replies
2. Debian
Ok, I made changes to my routing tables..... which file do I modify to make the routes initialize correctly when the machine boots up? I work with all flavours of Unix/Linux... but this is an older box...
Linux, Release 2.2.14-5.0.
I did a grep for the default route in /etc, but didnt find... (2 Replies)
Discussion started by: djsal
2 Replies
3. Solaris
Hi there
When adding a route (or indeed deleting a route) which file is amended ? I am moving a box from one network to another and when it starts up it tries to connect run 'add net 192.x.x.x' etc etc ...but i dont want it to do that
where do I edit these route additions
cheers (5 Replies)
Discussion started by: hcclnoodles
5 Replies
4. Solaris
Hi,
I need help to add new route:
10.252.0.138, GW 10.252.0.129 to e1000g1
and
10.252.0.10, GW 10.252.0.1 to e1000g2
tnx (4 Replies)
Discussion started by: mehrdad68
4 Replies
5. IP Networking
hello, i need help on setting my coyote linux, i've working on this for last 5 days, can't get it to work. I've been posting this message to coyote forum, and other linux forum, but haven't get any answer yet. Hope someone here can help me...... please see my attached picture first.
... (0 Replies)
Discussion started by: dlwoaud
0 Replies
6. Programming
im used to windows dll which gets loaded at runtime, are static libraries the same? the ones i link with -l on gcc?
i mean, if my app used libpng for example, and i compiled it to a single ELF executable and took it to another pc that have no libpng on it, will it work? or it will complain... (2 Replies)
Discussion started by: JonhyM
2 Replies
7. Programming
I'm writing a program which uses curl to be run on Linux PCs which will be used by a number of different users. I cannot make the users all install curl on their individual machines, so I have tried to link curl in statically, rather than using libcurl.so. I downloaded the source and created a... (8 Replies)
Discussion started by: BrandonShw
8 Replies
8. SCO
Hi,
Just a question of thought. Why one needs to add static routes on Unix servers ? If I had ethernet card, it already has the settings for gateway for incoming and outgoing requests. We donot have to explicitly set the route it should take. Then what is the use... (3 Replies)
Discussion started by: dextergenious
3 Replies
9. Red Hat
Hi All,
Is there a quick way to check whether the current routes on my centos are
persistent or not before rebooting ?
i can take a route -n output but i may completely lost access to my server if the routes are gone.
thanks. (1 Reply)
Discussion started by: coolatt
1 Replies
10. Red Hat
I have three systems A,B,C. I want to configure A in such a way that all packets from A to C goes via B.
I tried:
1. ip route add 'ip of C' via 'ip of B'
2. route add -net 'net address' netmask gw 'ip of B'
These commands work initially when I try a ping or traceroute and expire after... (2 Replies)
Discussion started by: kanak
2 Replies
routes(4) Kernel Interfaces Manual routes(4)
NAME
routes - Specifies Internet routing information to the routing tables
SYNOPSIS
/etc/routes
DESCRIPTION
Static routes can be defined in the /etc/routes file. The /etc/routes file identifies static routes that are automatically added to the
network routing tables with the /usr/sbin/route add command. The /sbin/init.d/route script contains the /usr/sbin/route add command that
is executed for each entry in the /etc/routes file when the network is restarted on the system or the system is rebooted.
The general format of an entry in the /etc/routes file is: Dest Name1 Name2
The following is a brief description of each element in an /etc/routes file entry: A keyword that indicates whether the route is to a net-
work or to a host. The two possible keywords are -net and -host. The name or address of the destination network or host. Name1 can be
either a symbolic name (as used in the /etc/hosts or /etc/networks file) or an Internet address specified in dotted-decimal format. The
name or address of the gateway host to which messages should be forwarded. Name2 can be either a symbolic name (as used in the /etc/hosts
file) or an Internet address specified in dotted-decimal format.
The routes file is a Context-Dependent Symbolic Link (CDSL) and must be maintained as such. See the System Administration manual for more
information.
EXAMPLES
To specify a route to a network through a gateway host with an entry in the /etc/routes file, enter:
-net net2 host4
This example specifies a route to a network, net2, through the gateway host4. To specify a route to a host through a gateway host
with an entry in the /etc/routes file, enter:
-host host2 host4
This example specifies a route to a host, host2, through the gateway host4. To specify a route to a default gateway host with an
entry in the /etc/routes file, enter:
default 130.9.0.5
This example specifies a route to a default gateway with an Internet address of 130.9.0.5.
FILES
Contains the /usr/sbin/routed add command.
RELATED INFORMATION
Commands: route(8)
Daemons: gated(8), routed(8)
Files: gated.conf(4)
Network Administration delim off
routes(4)