11-09-2007
Still the same problem - Please see IF its correct?
partition> p
Current partition table (original):
Total disk cylinders available: 17832 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 524 - 2482 15.01GB (1959/0/0) 31471335
1 swap wu 1 - 523 4.01GB (523/0/0) 8401995
2 backup wm 0 - 17831 136.60GB (17832/0/0) 286471080
3 unassigned wm 2483 - 4441 15.01GB (1959/0/0) 31471335
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> 3
Part Tag Flag Cylinders Size Blocks
3 unassigned wm 2483 - 4441 15.01GB (1959/0/0) 31471335
Enter partition id tag[unassigned]: usr
Enter partition permission flags[wm]:
Enter new starting cyl[2483]: 2483
Enter partition size[31471335b, 1959c, 4441e, 15366.86mb, 15.01gb]: 30gb
partition> label
Ready to label disk, continue? y
partition> q
root@unknown # newfs /dev/rdsk/c0t0d0s2
newfs: /dev/rdsk/c0t0d0s2 last mounted as /app
newfs: construct a new file system /dev/rdsk/c0t0d0s2: (y/n)? y
Warning: 5208 sector(s) in last cylinder unallocated
/dev/rdsk/c0t0d0s2: 286471080 sectors in 46627 cylinders of 48 tracks, 128 sectors
139878.5MB in 2915 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
Initializing cylinder groups:
..........................................................
super-block backups for last 10 cylinder groups at:
285576352, 285674784, 285773216, 285871648, 285970080, 286068512, 286166944,
286265376, 286363808, 286462240
root@unknown # mount /dev/dsk/c0t0d0s2 /app
root@unknown # df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 15496821 7472293 7869560 49% /
/devices 0 0 0 0% /devices
ctfs 0 0 0 0% /system/contract
proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
swap 17573728 808 17572920 1% /etc/svc/volatile
objfs 0 0 0 0% /system/object
/usr/lib/libc/libc_hwcap2.so.1
15496821 7472293 7869560 49% /lib/libc.so.1
fd 0 0 0 0% /dev/fd
swap 17572956 36 17572920 1% /tmp
swap 17572952 32 17572920 1% /var/run
/dev/dsk/c0t0d0s2 141066718 65553 139590498 1% /app
root@unknown #
10 More Discussions You Might Find Interesting
1. AIX
Hi everybody,
Is it possible to create a Shared Filesystem on Network to be accessed from 2 Systems?
Both systems are AIX but with different versions. One of these systems is AIX 4.3 & the other is AIX 5.2.
Thanks in advanced (8 Replies)
Discussion started by: aldowsary
8 Replies
2. AIX
i am new in the field 3months to be precise. how do i come up with size, i want to change for the filesystem? assuming there is enough space on the volume group.
do i just assign any value? (5 Replies)
Discussion started by: freeman
5 Replies
3. Solaris
# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c1d0s0 4.5G 4.3G 129M 98% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K ... (4 Replies)
Discussion started by: seyiisq
4 Replies
4. Filesystems, Disks and Memory
Hi all,
I would like to ask on how to create 2MB partition on a Compact Flash card. It supposed to be of FAT12 type, and the CF capacity is 4GB. I try to do the partitioning and specify the size as 2MB but the partition editor automatically resize it to 8MB. I know that this is possible and the... (4 Replies)
Discussion started by: archayl
4 Replies
5. Red Hat
I'm new to linux and need information on how do I create a filesytem on a dedicated on LUN for RHEL 4 and 5? I want the filesystem to be a ext3
---------- Post updated at 10:00 AM ---------- Previous update was at 08:56 AM ----------
Found the answer. This thread can be closed. (1 Reply)
Discussion started by: soupbone38
1 Replies
6. Linux
I created a new filesystem using dd and mounted:
I have a filesystem /FAW with 1Terra space
/dev/sdb1 1151331444 24742604 1068104612 3% /FAW
Steps I followed to create a new filesystem
# dd if=/dev/zero of=/FAW/vms/linux_vm/disk2.img bs=1 count=1024 seek=500G
# mke2fs... (10 Replies)
Discussion started by: sriram003
10 Replies
7. Programming
The problem: I need to work with large arrays and after one of my structures grew in size my program started getting segmentation fault.
My code where I allocate the arrays:
static R1 *tarr;
static R2 *rarr;
proc_init_mem()
{
const int t_sz = sizeof(R1) *... (9 Replies)
Discussion started by: migurus
9 Replies
8. Shell Programming and Scripting
Hello,
I am on solaris 9 (KSH) and I am on trouble while using a command line in a script to get the directory size of a directory.
/usr/bin/du -sk /data/_restit
typeset -i rep_size=` /usr/bin/du -sk /data/_restit |cut -d"/" -f1 `
echo "${rep_size}"
I did try different way to write the... (6 Replies)
Discussion started by: Aswex
6 Replies
9. UNIX for Advanced & Expert Users
Hello,
in one default UFS filesystem we have 8K block size (bsize) and 1K fragmentsize (fsize). At this scenary I thought all "FileSytem IO" will be 8K (or greater) but never smaller than the fragment size (1K). If a UFS fragment/blocksize is allwasy several ADJACENTS sectors on disk (in a ... (4 Replies)
Discussion started by: rarino2
4 Replies
10. UNIX for Advanced & Expert Users
Hi,
I have a task of creating a UFS filesystem in an LDOM. It is located in a hypervisor (CDOM).
The storage has been provisioned to the CDOM. How do I make it reflect to the LDOM, and then from there configure/set up the filesystem in the LDOM?
Please help. (1 Reply)
Discussion started by: anaigini45
1 Replies
LEARN ABOUT DEBIAN
prtvtoc
prtvtoc(1M) System Administration Commands prtvtoc(1M)
NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1: Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2: Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3: Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO
devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)
WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.10 25 Jul 2002 prtvtoc(1M)