port Post: 302143822

9 More Discussions You Might Find Interesting

1. Solaris

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports; out of which one port says it is not connected # luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED /devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED but both...

2. IP Networking

SSH Port Forwarding - sharing the same port

Hi Linux/Unix Guru, I am setting Linux Hopping Station to another different servers. My current config to connect to another servers is using different port to connect. e.g ssh -D 1080 -p 22 username@server1.com ssh -D 1081 -p 22 username@server2.com Now what I would like to have...

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. IP Networking

telnet for port 5433 is not working while it works for port 22

Hi, I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from...

5. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

6. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

7. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

8. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used...

9. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT NETBSD

arcmsr

ARCMSR(4)						   BSD Kernel Interfaces Manual 						 ARCMSR(4)

NAME

     arcmsr -- Areca Technology Corporation SATA/SAS RAID controller

SYNOPSIS

     arcmsr* at pci? dev ? function ?

DESCRIPTION

     The arcmsr driver provides support for the PCI-X and PCI Express RAID controllers from Areca Technology Corporation:

	   -   ARC-1110 PCI-X 4 Port SATA RAID Controller
	   -   ARC-1110ML PCI-X 4 Port SATA RAID Controller
	   -   ARC-1120 PCI-X 8 Port SATA RAID Controller
	   -   ARC-1120ML PCI-X 8 Port SATA RAID Controller
	   -   ARC-1130 PCI-X 12 Port SATA RAID Controller
	   -   ARC-1130ML PCI-X 12 Port SATA RAID Controller
	   -   ARC-1160 PCI-X 16 Port SATA RAID Controller
	   -   ARC-1160ML PCI-X 16 Port SATA RAID Controller
	   -   ARC-1170 PCI-X 24 Port SATA RAID Controller
	   -   ARC-1200 Rev A PCI Express 2 Port SATA RAID Controller
	   -   ARC-1202 PCI Express 2 Port SATA RAID Controller
	   -   ARC-1210 PCI Express 4 Port SATA RAID Controller
	   -   ARC-1220 PCI Express 8 Port SATA RAID Controller
	   -   ARC-1230 PCI Express 12 Port SATA RAID Controller
	   -   ARC-1230ML PCI Express 12 Port SATA RAID Controller
	   -   ARC-1231ML PCI Express 12 Port SATA RAID Controller
	   -   ARC-1260 PCI Express 16 Port SATA RAID Controller
	   -   ARC-1260ML PCI Express 16 Port SATA RAID Controller
	   -   ARC-1261ML PCI Express 16 Port SATA RAID Controller
	   -   ARC-1280 PCI Express 24 Port SATA RAID Controller
	   -   ARC-1280ML PCI Express 24 Port SATA RAID Controller
	   -   ARC-1680 PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680LP PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680i PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680x PCI Express 8 Port SAS RAID Controller
	   -   ARC-1681 PCI-X 8 Port SAS RAID Controller

     These controllers support RAID levels 0, 1, 1E, 3, 5, 6, and JBOD using either SAS or SATA II drives.

     arcmsr supports management and monitoring of the controller through the bioctl(8) and envstat(8) commands.

     Please note, however, that to use some features that require special privileges, such as creating/removing hot-spares, pass-through disks or
     RAID volumes will require to have the password disabled in the firmware; otherwise a Permission denied error will be reported by bioctl(8).

     When a RAID 1 or 1+0 volume is created, either through the bioctl(8) command or controller's firmware, the volume won't be accessible until
     the initialization is done.  A way to get access to the sd(4) device that corresponds to that volume without rebooting, is to issue the fol-
     lowing command (once the initialization is finished):

     $ scsictl scsibus0 scan any any

     The arcmsr driver will also report to the kernel log buffer any error that might appear when handling firmware commands, such as used by the
     bioctl(8) command.

EVENTS

     The arcmsr driver is able to send events to powerd(8) if a volume or any drive connected to the volume is not online.  The state-changed
     event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens.

SEE ALSO

     intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8), scsictl(8)

HISTORY

     The arcmsr driver first appeared in NetBSD 5.0.

AUTHORS

     The arcmsr driver was originally written for OpenBSD by David Gwynne.  It was ported to NetBSD and extended by Juan Romero Pardines.

BSD
								   March 3, 2008							       BSD