Cloned drive won't boot ? Post: 302130680

10 More Discussions You Might Find Interesting

1. Solaris

Solaris (9) won't boot!

Hi, I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed: Boot device: net file and args: Network link setup failed Please check cable and try...

2. AIX

server won't boot

Hi all , i was trying to upgrade firmware on machine 7028-6E4 and it failed . Now machine does not boot anymore , i can not get SMC menu either ... What are my options ? Thanks, Rahim

3. Solaris

nfsd won't start at boot up

Hi Inexplicably, nfsd no longer starts automatically on our Sun boxes running Solaris 9, so that 'automount' no longer functions automatically. The problem first manifested itself when we could not access files on any of the nfs automounted directories in our LAN after one of the servers (say...

4. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me...

5. Solaris

Ultra 60 won't boot

I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the...

6. Ubuntu

External Hard drive won't mount

i have a Simple Tech hard drive that i use between two computers. it is formatted to ntfs. i have a dell desktop with Ubuntu 7.10 and Ubuntu 8.04 and Windows XP Home. and i have a laptop with Ubuntu 7.10 and Ubuntu 8.04. the laptop recognizes the hard drive on both 8.04 and 7.10 but my desktop...

7. UNIX for Dummies Questions & Answers

Linux won't boot

I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed. I tried diffrent Linux distributions, but nothing works. This are the partitions, maybe it's...

8. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD...

9. SCO

SCO UNIX Won't Boot

Our system is not booting up properly. It keeps going to this screen: Enter Run Level (0-6, s or S): I tried to hit all nos# 0-6 is just goes to hung state. Tried s or S & it brings me to single user mode. I've checked the file systems & found out that all three had 98%. I tried to...

10. UNIX for Dummies Questions & Answers

New kernel won't boot

I compiled new kernel in linux 10.04 called linux-2.6.26.8-xenomai, it runs alongside the other kernel, but when I want to boot it I get an error message saying: Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/sda5 does not exist. After making the modules and headers I made the...

LEARN ABOUT NETBSD

mlxctl

MLXCTL(8)						    BSD System Manager's Manual 						 MLXCTL(8)

NAME

     mlxctl -- Mylex DAC960 family management utility

SYNOPSIS

     mlxctl [-f dev] [-v] [-a] status [drive] [...]
     mlxctl [-f dev] [-a] detach [drive] [...]
     mlxctl [-f dev] [-a] check [drive] [...]
     mlxctl [-f dev] rebuild channel:target
     mlxctl [-f dev] cstatus
     mlxctl [-f dev] rescan
     mlxctl [-f dev] config

DESCRIPTION

     The mlxctl utility performs status monitoring and management functions for Mylex DAC960 RAID controllers and attached devices.

     The following options are available:

     -a       Apply the action to all drives attached to the controller.

     -f dev   Specify the control device to use.  The default is /dev/mlx0.

     -v       Increased verbosity.

     The following commands are available:

     cstatus  Display the controller's current status.

     status   Display the status of the specified drives.  This command returns 0 if all drives tested are online, 1 if one or more drives are
	      critical and 2 if one or more are offline.

     rescan   Re-scan the logical drive table, and attach or detach devices from the system as necessary.

     detach   Detach the specified drives.  Drives must be unmounted and unopened for this command to succeed.

     check    Initiate a consistency check and repair pass on a drive that provides redundancy (e.g., RAID1 or RAID5).	This command returns imme-
	      diately.	The status command can be used to monitor the progress of the check.

     rebuild  Rebuild onto the specified physical drive.  Note that there can be only one running rebuild operation per controller at any given
	      time.  This command returns immediately.	The cstatus command can be used to monitor the progress of the rebuild.

     config   Write the current system drive configuration to stdout.

EXAMPLES

     Display the status of drive ld3 attached to the controller mlx1:

	   mlxctl -f /dev/mlx1 -v status ld3

SEE ALSO

     ld(4), mlx(4)

HISTORY

     The mlxctl command first appeared in NetBSD 1.5.3, and was based on the mlxcontrol utility found in FreeBSD.

BUGS

     Modifying drive configuration is not yet supported.

     Some commands do not work with older firmware revisions.

     Error log extraction is not yet supported.

BSD
								  April 10, 2000							       BSD

10 More Discussions You Might Find Interesting

1. Solaris

Solaris (9) won't boot!

Discussion started by: alarmcall

2. AIX

server won't boot

Discussion started by: rahim

3. Solaris

nfsd won't start at boot up

Discussion started by: dcshungu

4. Solaris

cannot find boot device and won't boot off cdrom

Discussion started by: kymberm