I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
Hi Everyone,
I have a problem. I'm trying too reinstall sun solaris 8.0 on may Sunfire 280r but solaris 9.0 is all ready installed. I tried to boot from cd rom it keeps telling me that File does not seem executable. I need to get Solaris 8.0 on this system. I have boot all ready in single mode... (4 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error
Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args:
Can't read disk label
Can't open disk label package
can,t open boot device
... (17 Replies)
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Good Afternoon,
I'm trying to boot from cdrom so I:
bash-2.05# init 0
{1} ok boot cdrom -s and I get:
Rebooting with command: boot cdrom -s
Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s
Can't read disk label.
Can't open disk label package
Evaluating:
Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
LEARN ABOUT MINIX
shutdown
SHUTDOWN(8) System Manager's Manual SHUTDOWN(8)NAME
shutdown - graciously close the system down
SYNOPSIS
shutdown [-hrRmk] [-x code] [time-specification [message]]
DESCRIPTION
Shutdown is a program which allows a system operator to close down the system in an nice way. Shutdown informs the users why and when the
system is going down. This warning is issued 10 minutes before shutdown time and every minute in the last 5 minutes. At this time (5 min-
utes), shutdown creates a file /etc/nologin to prevent new users from logging in.
Shutdown keeps a logfile of shutdowns. Every shutdown is registered in /usr/adm/wtmp, if this file exists. After these actions, a call is
done to reboot(2) which actually brings the system down.
Time-specification may be something like 15:00, 15.00, +15, or now for a shutdown at 3pm (twice), 15 minutes from now, or immediately.
The message may be used to describe why the system is going down, it may also be typed on standard input with the -m option.
OPTIONS -h This flag prevents the system from rebooting after the shutdown. The system can now be powered off. This is the default.
-r This flag indicates that the system should reboot after shutting down.
-R Reboot the system by resetting it. Normally the kernel will try to return to the Boot Monitor. With -R the system will receive a
hardware reset.
-x code
Halt the system and let the Monitor execute the given code as if typed at the monitor prompt. You can for instance use -x 'boot
hd0' as a very fast way to reboot "from the top."
-m Allows the operator to type a shutdown message on standard input, that will be added to the messages displayed on all terminals.
-k This option gives the possibility of terminating an already started shutdown. This is only possible if shutdown time has not yet
arrived.
-C Check if the system crashed. This option is not used at shutdown time, but at reboot time. It tells if the file systems should be
checked by testing if the last entry in the wtmp file is a shutdown entry. (A crude replacement for a file system clean flag.)
FILES
/usr/adm/wtmp, /etc/nologin, /usr/adm/authlog
SEE ALSO reboot(2), wall(1), halt(8), boot(8).
AUTHOR
Edvard Tuinder (v892231@si.hhs.NL)
SHUTDOWN(8)