Hardware Change 715/33 715/100 HIL - PS2 - XServer didnt start ??? Post: 302120235

9 More Discussions You Might Find Interesting

1. HP-UX

root password in hpux 10.01 on apollo 715/50

Hi, I'm from Venezuela and my English is not so good, please be patient. I got a problem with the machine described above, I tried to to enter in "the apollo" my teacher asked me to do it, because it's a part of an asignment but nobody knows any count to work with it. First my teacher told me to...

2. UNIX for Advanced & Expert Users

XServer Fails to start

I've recently patched my AIX box from ML02 to ML06 and somehow along the way the monitor no longer starts up in GUI mode. Running the command xinit gives me the following errros ioctl Bad file Number 1356- Unable to start the X server I've checked the path variables, the monitor, the lai0...

3. IP Networking

Ip Addresses With Hardware Change

I have 2 identical printers with the same IP on my network. One is only used as a backup for the primary printer and both are never on line at the same time. The goal was to always keep only 1 on and have an use the other printer as an immediate backup if necessary. But when I switch the cable I...

4. Solaris

Auto Start/Stop Didnt Work in Solaris 10

Hi...all database - 10g Rs 2 with ASM platform - Sun Solaris V890 64bit This is the step i use to auto start the database n ASM: (auto start can start but need to kill lsvcrun first) 1 dbora---script 2 start_shutdown_asm.ksh---script 3. Dbora file must be put under /etc/init.d directory...

5. Solaris

Is possible to start Xserver in a domain of E25K without graphics card?

Hi, I need to start the Xserver process in a domain of a E25K which has installed Solaris 8, however this domain doesn't have installed a graphic card, is this possible? Or is there any way to emulate this process? In fact I don't know how to stop or start the Xserver process, is with...

6. Solaris

Solaris 10u7 won't boot after hardware change

Hi all, I've somehow gained the idea that I _need_ to run at least 1 box with Solaris, but things don't go as I had planned :-) I pulled this ancient IBM eserver xseries 305 out of the dust, and got myself a fresh copy of the required cd's for Solaris 10u7. FAIL, for some reason the box and the...

7. Hardware

Hardware Correction: How to change DVD write speed

I am now on Kernel 2.6.32-26 For me 16x CD write speed is okay. I have old hardware which was able to write DVDs at 1x, back in previous linux version. Now, I dont get speed of less than 4x. Tested on k3b, xfburn, and brasero. But all start at bottom 4x write speed. k3b forced back to...

8. SCO

How to change raid controller driver ? (hardware change)

Hello I'm trying to virtualize an instance of Sco Unix 5.0.5 in VirtualBox (called VM-A) , but sco I have problems set to launch with the new raid controller . The physical machine has a raid controller adaptec (alad driver) but VirtualBox uses buslogic (blc driver) What ...

9. IP Networking

C - IP change during a hardware refresh?

Hi All, I was told to perform analysis for IP change during a hardware refresh? Does the IP change when a hardware refresh is performed? if Yes, why?

LEARN ABOUT HPUX

xserver

Xserver(1)						      General Commands Manual							Xserver(1)

NAME

       X - X Window System display server dispatcher

SYNOPSIS

       X [ option ...]

DESCRIPTION
:
       Hewlett-Packard	supports  two  X  servers on HP-UX platforms, the Xhp X server which supports HP VISUALIZE graphics devices and the Xf86 X
       server which supports all other graphics devices.  These X servers are delivered as /usr/bin/X11/Xhp and /usr/bin/X11/Xf86.

       The X dispatcher determines which X server to launch based on the available graphics devices.  The control file /etc/X11/Xstart can provide
       additional  guidance to the X dispatcher.  The control file allows the user to specify which X server to start for given display connection
       numbers. The only X servers supported by the X dispatcher are Xhp, Xf86 and Xvfb.  If no Xstart	file  exists,  the  dispatcher	loads  the
       appropriate  X server for the graphics device in the system.  HP-UX does not deliver the /etc/X11/Xstart file.  This file can be created by
       using the SAM/SMH utility.

OPTIONS

       If the X dispatcher is invoked with no arguments, the display connection is assumed to be :0.  The X dispatcher checks for display  connec-
       tion  options  and, if found, uses that display connection number when it checks the Xstart file.  All other options are passed on to the X
       server when it is started and it is the X server's responsibility to validate these options.  Not all options may be supported  on  both  X
       servers; refer to Xhp(1) and Xf86(1) to verify supported options for each X server.

RETURN VALUE

       None

Xstart EXAMPLES
       The control file syntax is the X server to start followed by the display connection number.  Valid entries take the form of:

       Xhp :0				       Start the Xhp X server on display connection 0

       Xf86 :10 			       Start the Xf86 X server on display 10

       /usr/bin/X11/Xhp :5		       Start the Xhp X server on display connection 5

       /usr/bin/X11/Xvfb :7		       Start the X Virtual Framebuffer server on display connection 7

FILES

       /etc/X11/Xstart			       Dispatcher control file.

       /var/X11/Xserver/logs/Xstartup.N.log    X dispatcher log file for display N.

SEE ALSO

       X(1), Xhp(1), Xf86(1)

STANDARDS CONFORMANCE

       See the appropriate section in Xhp(1) or Xf86(1).

																	Xserver(1)