Sponsored Content
Operating Systems AIX New disk not being recognised Post 302116950 by m223464 on Wednesday 9th of May 2007 11:10:56 AM
Old 05-09-2007
New disk not being recognised

Hi,

I've replaced hdisk0 in a Blade server but am having problems re-enabling the mirror as it appears the configuration database is not recognising the new disk.

The first 2 steps to re-enable the mirror fail:
$ extendvg rootvg hdisk0
0516-008 extendvg: LVM system call returned an unknown
error code (-271).
0516-792 extendvg: Unable to extend volume group.

$ mirrorvg '-Q' '-m' rootvg hdisk0
0516-304 getlvodm: Unable to find device id 00000000000000000000000000000000 in the Device
Configuration Database.
0516-014 mirrorvg: []: The physical volume appears to belong to another
volume group.
0516-1200 mirrorvg: Failed to mirror the volume group.


I checked lspv and this showed the new disk as available:
$ lspv
hdisk0 none None
hdisk1 001016cc923411e7 rootvg active


However if I try to display the hdisk0 I get the following error:
$ lspv hdisk0
0516-304 : Unable to find device id hdisk0 in the Device
Configuration Database.


If I try to manually configure hdisk0 I get this message
$ cfgmgr -l hdisk0
cfgmgr: 0514-604 Cannot access the CuDv object class in the


Can anyone offer any suggestions as to what could be causing the problem?

Thanks
Gareth
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

My network card wasn't recognised

HI I'm using red hat 7.0 and i've tried to find my network card, because it wasn't recognised at install time. I issued this commands "modprobe ne" and "modprobe 3c59x" and i got the message /lib/modules/2.2.16-22/net/ne.0: insmod failed. At this point i suppose to get this... (2 Replies)
Discussion started by: IMOTEB
2 Replies

2. AIX

During CD boot, hard disk does not get recognised

Hello, I have an AIX 5.1 server. Model : 7029-6E3. The users of this server have forgotted the root password and I am now supposed to reset it. I boot through the AIX 5.1 CD and try to go to the maitenance mode. But I am facing this issue, where, the hard disk does not recognised during this... (1 Reply)
Discussion started by: sjsowmya
1 Replies

3. UNIX for Dummies Questions & Answers

New hdd not being recognised properly by OS

I've just replaced the secondary disk drive (was 4 Gb) with a Seagate Barracuda 7200 200 Gb. However the OS seems to think this is only 500 Mb and a spin speed of 5400, although it correctly recognises the drive as Seagate ST3200822A. I take it that it still thinks the old drive is attached.... (1 Reply)
Discussion started by: wiggiesworld
1 Replies

4. Linux

HDD not recognised while trying to install Linux enterprise on HP laptop

Hi, Can anyone give me the clue to my problem which is hdd not recognised when l tried to install linux enterprise edition on my laptop HP compaq nc6320 centrino. thanxs (6 Replies)
Discussion started by: kayode
6 Replies

5. Red Hat

DirectFb installation & accelerator not recognised

Hi, I installed DirectFb on fedora 7, the machine has a Nvidia graphics card. The installation was successful and I can play the examples provided by the Direct fb website, but, I find that the accelarator is not getting recognised. when I do "fbset -i", the details shown are as below, it gives... (0 Replies)
Discussion started by: sifar
0 Replies

6. Solaris

tape drives not recognised

I have a server/domain on a m5000 running Solaris 10. It is part of a cluster. The other cluster member sees tape drives, but this one does not. It is zoned correctly, and I can see the drives are binded in lputil. The st.conf, and devlink.tab are identical. ST.CONF: - # # Copyright... (1 Reply)
Discussion started by: pfwhufc
1 Replies

7. Shell Programming and Scripting

[Solved] Value of a variable is not recognised for commands comes from external file

Hi, my script is setting a variable with value and this variable is present in my another command that is coming from external file and this command is internally called after this variable is set. but while execution of this command, the value is not retrieved properly. say, my script... (5 Replies)
Discussion started by: rbalaj16
5 Replies

8. UNIX for Dummies Questions & Answers

Total RAM not recognised

Hi We have a redhat 4 with 8GB ram in it but free -m only recognises 3 GB of total ram please could some one help me why this happens HP syetems insight manager showing 4* 2 GB RAMS # free -m total used free shared buffers cached Mem: 3290... (6 Replies)
Discussion started by: robo
6 Replies

9. UNIX for Dummies Questions & Answers

USB device not recognised after re-connect

Hi all unixware 7.1.3 I'm afraid ! I connected a usb tape drive and it was automatically recognised in the device list (sdiconfig -l) and created devices in /dev/rmt (ctape1 etc.). I could successfully read and write to the device. Then unplugged the usb cable and plugged it back in again... (0 Replies)
Discussion started by: deel
0 Replies
vxbrk_rootmir(1M)														 vxbrk_rootmir(1M)

NAME
vxbrk_rootmir - break off a mirror of a VxVM root disk to create a separate root disk generation SYNOPSIS
/etc/vx/bin/vxbrk_rootmir [-g diskgroup] [-v] [-b] [-t tasktag] {daname|dmname} DESCRIPTION
The vxbrk_rootmir command creates a mirror of a Veritas Volume Manager (VxVM) rootable boot disk, breaks the mirror, and then makes the broken-off mirror into a completely separate root disk that is suitable for booting by itself. Except the specified target disk, the bootdg should not contain any disks other than valid root mirror disks. A valid root mirror disk should have mirrors of all volumes in the bootdg. Thus, all disks must be exactly identical in terms of the volumes contained. The given disk access name, daname, or disk media name, dmname, is first checked to see if it is already a valid root disk mirror. If so, the mirror is broken off from the current VxVM root disk, and regenerated into a unique VxVM root disk. If the specified disk is not a valid root disk mirror, and is unused for other purposes, the vxrootmir command is first called to mirror the specified disk from the cur- rent VxVM root disk. After the mirroring operation is complete, the mirror is then broken off, and regenerated into a unique VxVM root disk. OPTIONS
-b Uses the setboot command to set the alternate boot disk to the specified disk. If the -v option is also specified, information is displayed about the current setboot settings. -g diskgroup Specifies the disk group into which the newly broken-off mirror is to be placed. The disk group is created if it does not already exist. If the disk group already exists, the broken-off mirror is added to it. If this option is not specified, the disk group of the broken-off mirror is set to the current default disk group. However, the generation number is made different from the default disk group to prevent the mirror from being automatically imported. -t tasktag Marks any tasks that are registered to track the progress of an operation with the specified tag, tasktag. This option is passed to vxrootmir if it is necessary first to mirror the specified disk that is to be broken off. -v Displays verbose output, including timestamps for operations that are in progress. This option is passed to vxrootmir if it is neces- sary first to mirror the specified disk that is to be broken off. ARGUMENTS
daname Specifies the disk to be used as the broken off mirror by its disk access name (such as c0t2d0). dmname Specifies the disk to be used as the broken off mirror by its disk media name (such as rootdisk03). EXAMPLES
This example shows the vxbrk_rootmir command being executed on a disk that already contains a valid root mirror: /etc/vx/bin/vxbrk_rootmir -g brkdg -vb c4t15d0 VxVM vxbrk_rootmir INFO V-5-2-4023 17:47: Checking specified disk(s) for presence and type VxVM vxbrk_rootmir INFO V-5-2-4025 17:47: DA c4t15d0s2, DM rootdisk06 is a valid root mirror VxVM vxbrk_rootmir INFO V-5-2-4052 17:47: Saving configuration data for later restoration VxVM vxbrk_rootmir INFO V-5-2-4022 17:47: Breaking off root mirror on DA c4t15d0s2 VxVM vxbrk_rootmir INFO V-5-2-4054 17:47: Setting broken off mirror on c4t15d0s2 as unique root disk VxVM vxbrk_rootmir INFO V-5-2-2566 17:47: Preparing disk c4t15d0s2 as a VxVM root disk VxVM vxbrk_rootmir INFO V-5-2-4046 17:47: Patching devnodes, fstab and volboot file in new Root FS VxVM vxbrk_rootmir INFO V-5-2-4045 17:47: Patching /stand/bootconf file to contain new root disk VxVM vxbrk_rootmir INFO V-5-2-2462 17:48: Current setboot values: VxVM vxbrk_rootmir INFO V-5-2-4048 17:48: Primary: 0/0/2/0.2.0 VxVM vxbrk_rootmir INFO V-5-2-4010 17:48: Alternate: 0/2/1/0.8.0.255.2.5.0 VxVM vxbrk_rootmir INFO V-5-2-4042 17:48: Making c4t15d0s2 (0/2/1/0.8.0.255.1.15.0) the alternate boot disk VxVM vxbrk_rootmir INFO V-5-2-4028 17:48: Disk c4t15d0s2 is now a broken off root disk The next example shows the command being executed on a disk that does not contain a valid root mirror, and which requires vxrootmir be called to mirror the root disk first: /etc/vx/bin/vxbrk_rootmir -g brkdg -vb c5t5d0 VxVM vxbrk_rootmir INFO V-5-2-4023 16:25: Checking specified disk(s) for presence and type VxVM vxbrk_rootmir INFO V-5-2-4043 16:25: Mirroring root disk VxVM vxrootmir INFO V-5-2-2501 16:25: Gathering information on the current VxVM root configuration VxVM vxrootmir INFO V-5-2-2441 16:25: Checking specified disk(s) for usability VxVM vxrootmir INFO V-5-2-2566 16:25: Preparing disk c5t5d0 as a VxVM root disk VxVM vxrootmir INFO V-5-2-3766 16:25: Disk c5t5d0 is now EFI partitioned disk c5t5d0s2 VxVM vxrootmir INFO V-5-2-2410 16:25: Adding disk c5t5d0s2 to brkdg as DM rootdisk03 VxVM vxrootmir INFO V-5-2-1646 16:25: Mirroring all volumes on root disk VxVM vxrootmir INFO V-5-2-1648 16:25: Mirroring volume standvol VxVM vxrootmir INFO V-5-2-1648 16:26: Mirroring volume swapvol VxVM vxrootmir INFO V-5-2-1648 16:30: Mirroring volume rootvol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume homevol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume tmpvol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume usrvol VxVM vxrootmir INFO V-5-2-1648 16:34: Mirroring volume optvol VxVM vxrootmir INFO V-5-2-1648 16:36: Mirroring volume varvol VxVM vxrootmir INFO V-5-2-1616 16:40: Disk c5t5d0s2 is now a mirrored root disk VxVM vxbrk_rootmir INFO V-5-2-4052 16:40: Saving configuration data for later restoration VxVM vxbrk_rootmir INFO V-5-2-4022 16:40: Breaking off root mirror on DA c5t5d0s2 VxVM vxbrk_rootmir INFO V-5-2-4054 16:40: Setting broken off mirror on c5t5d0s2 as unique root disk VxVM vxbrk_rootmir INFO V-5-2-2566 16:40: Preparing disk c5t5d0s2 as a VxVM root disk VxVM vxbrk_rootmir INFO V-5-2-4046 16:41: Patching devnodes, fstab and volboot file in new Root FS VxVM vxbrk_rootmir INFO V-5-2-4045 16:41: Patching /stand/bootconf file to contain new root disk VxVM vxbrk_rootmir INFO V-5-2-2462 16:41: Current setboot values: VxVM vxbrk_rootmir INFO V-5-2-4048 16:41: Primary: 0/0/2/0.2.0 VxVM vxbrk_rootmir INFO V-5-2-4010 16:41: Alternate: 0/2/1/0.8.0.255.2.0.0 VxVM vxbrk_rootmir INFO V-5-2-4042 16:41: Making c5t5d0s2 (0/2/1/0.8.0.255.2.5.0) the alternate boot disk VxVM vxbrk_rootmir INFO V-5-2-4028 16:41: Disk c5t5d0s2 is now a broken off root disk SEE ALSO
vxbootsetup(1M), vxdg(1M), vxintro(1M), vxrootmir(1M), vxtask(1M) VxVM 5.0.31.1 24 Mar 2008 vxbrk_rootmir(1M)
All times are GMT -4. The time now is 06:15 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy