I've had a VXFS filesystem get corrupted and now it won't mount.
Can I run a fsck -y on the raw disk device or should something be
done within veritas? Veritas does not see the disk at the moment. (2 Replies)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
Hi, Does anyone have a clever way of mapping the following from two different files using perl.
sample line from vxdisk list output (vxdisk-list.file):
emcpower18s2 auto:sliced IDFAG1_1 (IDFAG1_appdg) online
sample line from 'inq' output (inq.file):
... (0 Replies)
I am trying to write a kornshell script that will automatically create veritas disk groups. However, the only utility that I can find that will create the diskgroup is vxdiskadd, which prompts with interactive questions. I've tried to pass the answers through to vxdiskadd, but I receive the... (0 Replies)
hi all
i am using vxvm 5.1 on my sun blade 150 which is running with solaris 5.10. When i give the command "vxdisk list" it gives the following output
# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:none - - online... (2 Replies)
I installed new internal disks in my p570. They will be part of a new AIX vg. Unfortunately, we have Veritas Volume Manager running on this AIX 5.2 ml 10 box. Veritas has grabbed control of the disks. I want AIX LVM to control the disks.
I cannot get these disks free of Veritas:
<lspv... (2 Replies)
People i have an a storage i create two virtual disk 1 y 2.
In the virtual disk 1 i configure 8 volumes and in the Vd2 configure 5 volumes.
Now i want to create a disk group called Prod2 y Dev2 but when i go to vxdiskadm and i choose add disk o encapusalte when i press list to list the disk... (0 Replies)
Hi,
I`m on SunFire480R with Solaris 10. Disk in rootdg group failed, so it was replaced. However, I cannot make Veritas initalise the replaced disk:
# vxdctl enable
# vxdisk list c1t0d0s2
Device: c1t0d0s2
devicetag: c1t0d0
type: auto
flags: online error private autoconfig... (1 Reply)
Need help getting all disk devices back on node 2 the same as node 1.
Recently Veritas and/or Sun cluster got wrecked on my 2 node Sun cluster after installing the latest patch cluster. I backed out the patches and then node 2 could see only half of the devices and Veritas drives (though format... (0 Replies)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Discussion started by: Skmanojkum
1 Replies
LEARN ABOUT HPUX
vxbootsetup
vxbootsetup(1M)vxbootsetup(1M)NAME
vxbootsetup - set up system boot information on a Veritas Volume Manager disk
SYNOPSIS
/etc/vx/bin/vxbootsetup [-g diskgroup] [medianame ... ]
DESCRIPTION
The vxbootsetup utility configures physical disks so that they can be used to boot the system. Before vxbootsetup is called to configure a
disk, the required volumes, standvol, rootvol and swapvol (and optionally, dumpvol) must be created on the disk. All of these volumes must
be contiguous with only one subdisk.
The -g option may be used to specify the boot disk group.
If no medianame arguments are specified, all disks that contain usable mirrors of the root, swap, /usr and /var volumes are configured to
be bootable.
If medianame arguments are given, only the disks that are associated with the specified disk names are configured to be bootable.
vxbootsetup requires that:
o The root volume must be named rootvol and must have a usage type of root.
o The swap volume must be named swapvol and must have a usage type of swap.
o The volumes containing /usr and /var (if any) must be named usr and var, respectively.
See the chapter "Recovery from Boot Disk Failure" in the Veritas Volume Manager Troubleshooting Guide for detailed information on how the
system boots and how VxVM impacts the system boot process. The vxmirror, vxrootmir, and vxresize utilities call vxbootsetup automatically.
If you use vxassist, or vxmake and vxplex to create mirrors of the root volume on a disk, you must run vxbootsetup explicitly to make the
disk bootable.
ARGUMENTS
medianame
Specifies the disk name (disk media name) of a VM disk that is to be configured as bootable.
SEE ALSO disksetup(1M), edvtoc(1M), vxassist(1M), vxevac(1M), vxinstall(1M), vxintro(1M), vxmake(1M), vxmirror(1M), vxplex(1M), vxresize(1M),
vxrootmir(1M)
Veritas Volume Manager Troubleshooting Guide
VxVM 5.0.31.1 24 Mar 2008 vxbootsetup(1M)