I've had a VXFS filesystem get corrupted and now it won't mount.
Can I run a fsck -y on the raw disk device or should something be
done within veritas? Veritas does not see the disk at the moment. (2 Replies)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
Hi, Does anyone have a clever way of mapping the following from two different files using perl.
sample line from vxdisk list output (vxdisk-list.file):
emcpower18s2 auto:sliced IDFAG1_1 (IDFAG1_appdg) online
sample line from 'inq' output (inq.file):
... (0 Replies)
I am trying to write a kornshell script that will automatically create veritas disk groups. However, the only utility that I can find that will create the diskgroup is vxdiskadd, which prompts with interactive questions. I've tried to pass the answers through to vxdiskadd, but I receive the... (0 Replies)
hi all
i am using vxvm 5.1 on my sun blade 150 which is running with solaris 5.10. When i give the command "vxdisk list" it gives the following output
# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:none - - online... (2 Replies)
I installed new internal disks in my p570. They will be part of a new AIX vg. Unfortunately, we have Veritas Volume Manager running on this AIX 5.2 ml 10 box. Veritas has grabbed control of the disks. I want AIX LVM to control the disks.
I cannot get these disks free of Veritas:
<lspv... (2 Replies)
People i have an a storage i create two virtual disk 1 y 2.
In the virtual disk 1 i configure 8 volumes and in the Vd2 configure 5 volumes.
Now i want to create a disk group called Prod2 y Dev2 but when i go to vxdiskadm and i choose add disk o encapusalte when i press list to list the disk... (0 Replies)
Hi,
I`m on SunFire480R with Solaris 10. Disk in rootdg group failed, so it was replaced. However, I cannot make Veritas initalise the replaced disk:
# vxdctl enable
# vxdisk list c1t0d0s2
Device: c1t0d0s2
devicetag: c1t0d0
type: auto
flags: online error private autoconfig... (1 Reply)
Need help getting all disk devices back on node 2 the same as node 1.
Recently Veritas and/or Sun cluster got wrecked on my 2 node Sun cluster after installing the latest patch cluster. I backed out the patches and then node 2 could see only half of the devices and Veritas drives (though format... (0 Replies)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Discussion started by: Skmanojkum
1 Replies
LEARN ABOUT OPENSOLARIS
pcata
pcata(7D) Devices pcata(7D)NAME
pcata - PCMCIA ATA card device driver
SYNOPSIS
pcata@socket#:a -u
pcata@socket#:a -u,raw
DESCRIPTION
The PCMCIA ATA card device driver supports PCMCIA ATA disk and flash cards that follow the following standards:
o PC card 2.01 compliance (MBR+fdisk table required for all platforms).
o PC card ATA 2.01 compliance.
o PC card services 2.1 compliance.
The driver supports standard PCMCIA ATA cards that contain a Card Information Structure (CIS). For PCMCIA, nodes are created in /devices
that include the socket number as one component of the device name referred to by the node. However, the names in /dev, /dev/dsk, and
/dev/rdsk follow the current conventions for ATA devices, which do not encode the socket number in any part of the name. For example, you
may have the following:
+----------------+-----------------------------------+---------------------+
|Platform | /devices name | /dev/dsk name |
+----------------+-----------------------------------+---------------------+
|x86 | /devices/isa/pcic@1,3e0 /disk@0:a | /dev/dsk/c1d0s0 |
+----------------+-----------------------------------+---------------------+
|SPARC | /devices/iommu@f,e0000000 | /dev/dsk/c1d0s0 |
| | /sbus@f,e0001000 /SUNW, pcm- | |
| | cia@3,0 /disk@0:a | |
+----------------+-----------------------------------+---------------------+
PRECONFIGURATION
If a PC Card ATA device is recognized, the pcata driver is automatically loaded, IRQs allocated, devices nodes created, and special files
created (if they do not already exist).
Known Problems and Limitations
o You need to umount the file system before removing the disk.
o The ufs file systems on removable media (PC Card ATA) should have one of the onerror={panic, lock, umount} mount options set.
CONFIGURATION
Configuration topics include initial installation and configuration, identifying an unrecognized device, special files and hot-plugging.
Initial Installation and Configuration
1. Install the Solaris software.
2. Boot the system.
3. Insert the PC card ATA device.
Identifying an Unrecognized Device
If you insert a PC card ATA device and it is not recognized (no special files created), use the prtconf command to identify the problem.
1. Run the prtconf -D command to see if your pcata card is recognized. (A recognized device will appear at the end of the prtconf
output. For example:
# prtconf -D
. . .
pcic, instance #0 (driver name: pcic)
. . .
disk, instance #0
2. If pcata does not appear in the prtconf output, there is a problem with the PC card adapter configuration or with the hardware.
Check to see whether the problem is with the card or the adapter by trying to use the card on another machine and by seeing if
it works on the same machine using DOS.
Special Files
For PC card devices, nodes are created in /devices that include the socket number as one component of a device name that the node refers
to. However, the /prtc/dev names and the names in /dev/dsk and /dev/rdsk do follow the current convention for ATA devices, which do not
encode the socket number in any part of the name.
Hot-Plugging
o If you want to remove the disk, you must unmount the file system.
o Use the mkfs_pcfs(1M) command to create a pcfs file system:
# mkfs -F pcfs /dev/rdsk/c#d#p0:d
o To mount a pcfs file system, type:
# mount -F pcfs /dev/dsk/c#d#p0:c /mnt
o If you want to create a ufs file system, use the newfs command and type:
# newfs /dev/rdsk/c#d#s#
o To mount a ufs file system, type:
# mount -F ufs /dev/dsk/c#d#s# /mnt
o To create a Solaris partition, run the format command and go to the Partition menu. For more information, see the format(1M) man
page.
FILES
/kernel/drv/pcata pcata driver
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpsdpr |
+-----------------------------+-----------------------------+
SEE ALSO format(1M), mount(1M), newfs(1M), pcmcia(7D), attributes(5), pcfs(7FS)SunOS 5.11 2 Mar 2007 pcata(7D)